Awesome to see Amy healing up and back in the passenger seat. Seeing the videos of this place makes me tempted to do 9 hr drive to check it out. I'm liking the new camera. Keep the content coming be safe The Crew.
What a epic Video! Will seems to go full send an them some. Him flopping after climbing the hill in the earlier video, an then in this video he hits that tree! lol... I was laughing as bad as Scott at the end. Keep them coming!
Awesome video! Your top notch quality custom cage and bumper combo saved a radiator and probably a whole lot more after that whiskey throttle! Keep it 💯❗️👊👊
Kudos to the woman and men who do this you guys are the best my other half and I do that too with my family up in New Hampshire and Maine but 66 years old handicapped and I’m a little bit nervous with some of the really bad stuff that I have a tendency to go aroundbut my young son and my younger daughter and my grandkids go for it love it
Watching now great video so far! maybe should look into helicoiling the threads on the new diff? It would be a lot stronger/Less likely to pull out than aluminum threads
Good video👍, y’all like the rough stuff😂, I’m surprised windrock not y’all’s second home, we went there one time, never take my machine back, but it was fun watching those fools
Hey question for ya bro, I’m thinking about dialing in on 35s and doing what it’ll take to run them strong and reliably, I noticed you guys seem to stick with the 32s if im not mistaken, should I stay away from the 35s on a 64” machine ?
If you like to ride hard I would 100% stay away from 35s. If you just do slow rock crawling and trail riding 35s would be great. There are no parts or diffs that will fully handle 35s when momentum climbing.
I haven’t been in a scenario to use it yet but I did use it a little in the last video. Since this video I have send it back for them to inspect the actuator to make sure the internals held up to the abuse and they are in the process of sending me a new vertical production model with a skid plate.
You guys always have so much fun. Keep killin it. Jesse, I recently ripped a skid plate off the back of my XRS do you run stock or aftermarket plates? I’m trying to desire what to replace it with cause it’s bent to hell now.
@@TheCanAmCrew I think the 72” is different but i was looking at options, and i think the stock replacement seems best and cheapest. Do you stick with rivets or drilled the frame out for bolts?
@@TheCanAmCrew Sweet, that’s what i was leaning towards but wanted your opinion cause you know these machine inside and out. Thanks again, hope you have a great day.
I don't know what you are a better dad ,driver ,or mechanic...yall are good people
🙏🏻
for sure, couldn’t have said it better myself
Absolutely spot on. You guys inspire me to be a better dad and grandpa!! Thank you for the way you do what you do!
Great job Coop on doing a full send up Shipwreck!!! Like a pro buddy!!
Awesome to see Amy healing up and back in the passenger seat. Seeing the videos of this place makes me tempted to do 9 hr drive to check it out. I'm liking the new camera. Keep the content coming be safe The Crew.
Sherrie, your driving skills never cease to amaze me. It's no wonder Jesse is nervous.
🤙🏻👊🏻
What a epic Video! Will seems to go full send an them some. Him flopping after climbing the hill in the earlier video, an then in this video he hits that tree! lol... I was laughing as bad as Scott at the end. Keep them coming!
🤣🤣. 👊🏻👊🏻
My man thats what we're all here for! Glad you are enjoying along with us...I'm having the time of my life!
At 40 minutes you said "she makes me nervous" She's earned the name send it Sherry... Lol. Love your videos..
🤣🤣
Scott’s laugh kills me
Awesome video! Your top notch quality custom cage and bumper combo saved a radiator and probably a whole lot more after that whiskey throttle! Keep it 💯❗️👊👊
38:53 short girl problems Sheri 😂 I feel your pain
Loved the slow motion ,was funny
OMG. I'm laughing so hard. Scott is the best. 😎
Great driving and man those zillas . Will looked like he did a mule kick on heart break great video! 😊
i dont know what the hell i did but it was fun. :)
Gultches is one of those places that you go to if you just want to tear your stuff up.
Oh ya!
Happy Easter to you all…. Amazing video, great driving everyone 👍👍
Thank you. Happy Easter to you too
Great video, keep them coming!
Happy Easter everyone!
Thank you. Happy Easter to you too.
Kudos to the woman and men who do this you guys are the best my other half and I do that too with my family up in New Hampshire and Maine but 66 years old handicapped and I’m a little bit nervous with some of the really bad stuff that I have a tendency to go aroundbut my young son and my younger daughter and my grandkids go for it love it
Great Video !!
Scott cracks me up 😂
Happy Easter Crew..!!! Awsome series..!! Can't wait for the next...
Thank you. Happy Easter to you too.
That's some mean looking crawls.
Watching now great video so far! maybe should look into helicoiling the threads on the new diff? It would be a lot stronger/Less likely to pull out than aluminum threads
If your not laughing at some point in a ride your not doing it right.
That’s right!
Good video👍, y’all like the rough stuff😂, I’m surprised windrock not y’all’s second home, we went there one time, never take my machine back, but it was fun watching those fools
Windrock was a lot of fun. I wish it was closer to us.
Great video yall 💯 👍 😎
You should rename the video to "Carnage for Clicks"....
I think I might know what the new diff could be
👊🏻👊🏻
What pressure are you running? That’s what mine look like in the snow!
We run around 7psi
Hey question for ya bro, I’m thinking about dialing in on 35s and doing what it’ll take to run them strong and reliably, I noticed you guys seem to stick with the 32s if im not mistaken, should I stay away from the 35s on a 64” machine ?
If you like to ride hard I would 100% stay away from 35s. If you just do slow rock crawling and trail riding 35s would be great. There are no parts or diffs that will fully handle 35s when momentum climbing.
@@TheCanAmCrew thanks again dude you guys are awesome and very informative I appreciate the help 🫡
Awesome do I need my tablet updated now?
We will have updated maps for it soon.
woder if the 4seater razor (long wheelbase) wudof made it where Sherri was pointing to the sky.
It’s possible, I’ve watched videos of full size buggies not make it so I’m doubtful but I would definitely give it a go lol
What make and model mirrors do you run on yours and your wife’s sxs?
We run seizmik pursuit mirrors.
I haven't heard mu h about rear steer
I haven’t been in a scenario to use it yet but I did use it a little in the last video. Since this video I have send it back for them to inspect the actuator to make sure the internals held up to the abuse and they are in the process of sending me a new vertical production model with a skid plate.
What axles is Tim running?
He runs cobras.
Someone please tell Scott to fix his plastics and get a taillight
🤣 but why, it’ll just get ripped off the very next trail lol.
You guys always have so much fun. Keep killin it.
Jesse, I recently ripped a skid plate off the back of my XRS do you run stock or aftermarket plates? I’m trying to desire what to replace it with cause it’s bent to hell now.
We run the stock skid plates off the xrc model. Which might be the same as what is on your machine. I’m not 100% sure on that.
@@TheCanAmCrew I think the 72” is different but i was looking at options, and i think the stock replacement seems best and cheapest. Do you stick with rivets or drilled the frame out for bolts?
@@MrEsimmons178 i just stick with rivets.
@@TheCanAmCrew Sweet, that’s what i was leaning towards but wanted your opinion cause you know these machine inside and out. Thanks again, hope you have a great day.
Where is Emma?
14:40
@@TheCanAmCrew Dont listen to Jesse. It was a group decision. We kicked her out. Makes us all look too bad.
@@willklein9227 🤣🤣🤣