Your videos are always keeping me on the edge of my seat. So informative and helpful and just encouraging to watch. Great shooting as always Ray. Thanks again for sharing 😉👊
I just started in smallbore competition starting with 4 position 50' competition. I'm using a 10/22 as that is what I already had and didn't want to spend a lot of money if I didn't like it. I have a feeling I'll will be spending more money soon on it. Thanks for the tips on the sitting and kneeling. I'll give them a try as I have been putting my elbows on my knees in both positions.
Good video! I think you’re right about positional shooting, it’s what makes the difference in competition. It’s very advantageous to be proficient in building effective shooting positions. Off-hand is the foundation. Solidify that foundation with practice, and everything that’s built from there will be strong.
I always put both dials & holds on my data card incase I nead to speed up or use more percision. Great video as usual, hope you guys get into more centerfire stuff soon, looks like your hung on that rimfire.
I wish you could include zooming in on the targets while your shooting, seeing from the vantage of a spotter has a lot of appeal to it. I'm looking forward to trying this sport in the base class if we ever return to normal life. Thanks for the tips.
Hi Ray, what are the sizes of the targets at the other distances? If people want to learn and practice positional shooting please come to an Appleseed shoot. We teach with a sling as Ray says it is MUCH steadier. I believe it is the best training value available.
Hey Charles, It varies with each match. Typically, what I have seen is about 2”-3” targets at 100, 200 is about 5”x5”, 300 is about 12”x12” 400 is 20”. These are from the last couple of matches
Yeah that KYL target is a must have if your gonna get into rimfire shooting, it's great for training and a little bit of gambling within other shooter's. Ray try it at 100yrds 10 shots 5 target's 2 different shooting positions like you had there but go from biggest to smallest and reverse it from small to big, Good luck to you guys. Oh yeah and is that a 16in barrel on your rifle ?
Regarding your bullet selection... Lead slug, copper coated lead, copper solids, hollow points? What's your flavor and grain weight? Thanks! 19:32 Also, you didn't go over the spec's of your .22...
Shooting offhand you will always have wabble. I find geeting the rifle to move in a figure 8 pattern. Then just learn when to squeeze off the shot as it is coming across your target.
Hey x I had the pleasure of shooting with y’all Saturday at liberty . I had spoke with you about my vudoo that I ordered . Still a lot of wait time . Anyhow I got a prs1 stock for it . But shooting the match was the first time I’ve used a chassis system and it was just a better feeling and controllable platform it seamed . My question is the apparition from vudoo . Sams to be a great chassis system what do you think of it or have you ran that chassis ? Also have you herd or done any research on the new 3-60 ?
Just goes to show you can have a 6 thousand dollar setup but if you don’t have your technique refined you could just as well be using a $250 Walmart 10/22 and a $35 scope. Not trying to offend anyone just my opinion.
Hello Ray. I am trying to get into the NRL22. I was looking at these two rifles. CZ Varmint Precision Chassis with the 24'' barrel. Anschutz 1710 XLR 23'' barrel. What rifle scope would you recommend in getting their is so many to choose from. I do not have a price range. I do have around 3arces looking to set up a range for long range shooting. Can you help me in picking out targets for the range to use. If you like I will send you my e mail. Would like your help getting this set up . Thank you for a great video. and sharing.
Thanks David, I appreciate the comments. The rifle is going to 100% personal choice. I would however opt for a 20” length. That is all the barrel you need. If you can find a Vudoo I would definitely hold out for one of those if NRL22 and PRS rimfire is your end goal. Also, we haven’t gotten them yet but the rimfire targets by JC Steel seems like the way to go. They have a NRL 22 package that looks like it will have everything you need to get set up. I hope that helps.
Hello Ray, what base would you recommend (0, 15, 20 MOA) for a Tikka T1X with an Athlon scope with 18 mils of adjustment? It will be used to shoot 50 ~ 250 yards.
Or if you’re asking about what Ray shoots for his centerfire rifle, he uses an Accuracy International bolt action rifle in 6mm creedmoor I believe unless he switched it back to 6.5 Creedmoor or 6mm PRC
Ray, doesn't that expose your bullet to the elements for a longer duration than that of even a "regular" velocity? I heard the high/hyper velocity ammo have some crazy ES... But, pretty consistent velocitied with the regular... Do sub's just have a smaller ES? Or what is your reasoning?
@KrisSays Typically, with subsonic match ammunition, the es and sd’s are much lower. You also don’t have to worry about bullets transitioning from supersonic to subsonic speeds.
Your videos are always keeping me on the edge of my seat. So informative and helpful and just encouraging to watch. Great shooting as always Ray. Thanks again for sharing 😉👊
Thanks JerrBear and thanks for watching the channel sir!
Thank You Sirs! It was good to see these strategies/demos. I definitely have my ankles out in front while seating due to knee injuries. 👍🇺🇸 #22aday
Great video. I liked all the points you made. Thanks.
I just started in smallbore competition starting with 4 position 50' competition. I'm using a 10/22 as that is what I already had and didn't want to spend a lot of money if I didn't like it. I have a feeling I'll will be spending more money soon on it. Thanks for the tips on the sitting and kneeling. I'll give them a try as I have been putting my elbows on my knees in both positions.
Good job! Getting into rimfire myself and about to go down the rabbit hole!
Thanks Robert.
Good video! I think you’re right about positional shooting, it’s what makes the difference in competition. It’s very advantageous to be proficient in building effective shooting positions. Off-hand is the foundation. Solidify that foundation with practice, and everything that’s built from there will be strong.
Very helpful information.👍
I always put both dials & holds on my data card incase I nead to speed up or use more percision. Great video as usual, hope you guys get into more centerfire stuff soon, looks like your hung on that rimfire.
Good information thanks
Good stuff thx just getting started in PRS
Amazingly helpful video, guys!!!
Thanks outlaw.
Great info! Still mopping the floor with Rick and Matt!
LOL yep
Great info.
Excellent training video that everyone can a will benefit from if they take note , follow and practice your instructions .
Thanks CSH!
Awesome video very helpful guys
Thanks Murray.
Thank you for this video and all the great tips.
My pleasure William.
Some really good information on shooting cheers Ray 👍 all definitely give it a go with my 22wmr
Pff 😢 over here we are still in lockdown, so no training or shooting for like 5 months already😢😢😢. Love these tips and tricks
Thanks Pieter. I appreciate you watching .
I feel you Pieter, same here in germany😔
I wish you could include zooming in on the targets while your shooting, seeing from the vantage of a spotter has a lot of appeal to it. I'm looking forward to trying this sport in the base class if we ever return to normal life. Thanks for the tips.
I understand completely. It was just a quick training day so we didn’t set up additional cameras.
Great info 👍🏻
Thank you Ray for your reply. Can you please do a video off your rifle set up. Thank you again.
For sure
Hi Ray, what are the sizes of the targets at the other distances?
If people want to learn and practice positional shooting please come to an Appleseed shoot. We teach with a sling as Ray says it is MUCH steadier. I believe it is the best training value available.
Hey Charles,
It varies with each match. Typically, what I have seen is about 2”-3” targets at 100, 200 is about 5”x5”, 300 is about 12”x12”
400 is 20”. These are from the last couple of matches
@@XRING Thanks Ray!
Awesome training tips! Thanks for sharing!
Nice!! I’ll try these tips with my Ruger 10/22!!
Everyone have a great day!
You are the man... I love the information
Good vid! I will have to try those positional tips!
Great video! Your the man!!!!!
Great video, like the québec shirt
Excellent video, very good tips, especially to me that I am very interested to learn this discipline 👍
Once again Ray shows the boys how to do it!! 🤣🤣🤣👍👍
Yeah that KYL target is a must have if your gonna get into rimfire shooting, it's great for training and a little bit of gambling within other shooter's. Ray try it at 100yrds 10 shots 5 target's 2 different shooting positions like you had there but go from biggest to smallest and reverse it from small to big, Good luck to you guys. Oh yeah and is that a 16in barrel on your rifle ?
Thanks Walter! We definitely shoot that drill quite a bit. The barrel on the Vudoo is an 18”.
Excellent shooting! 👍
Good video practice is key
thanks! very helpful👍
You all had fun... and all I got to do was clean my reloading aria yesterday... and made 400 9mm for a sunny day!
Nice tips
Nice
Regarding your bullet selection... Lead slug, copper coated lead, copper solids, hollow points? What's your flavor and grain weight? Thanks! 19:32
Also, you didn't go over the spec's of your .22...
Cool idea like it, other than a kneeling position. Push the 22lr as far as you can!
Newbie … great info . Old man running a RPR . Need yoga classes !!
Shooting offhand you will always have wabble. I find geeting the rifle to move in a figure 8 pattern. Then just learn when to squeeze off the shot as it is coming across your target.
85y .25kyl positional
Impressive.
I was thinking that someone was going to bump that fence with their rifle or optic.
Happens at every match. Scope objectives take a beating in PRS.
Hey x I had the pleasure of shooting with y’all Saturday at liberty . I had spoke with you about my vudoo that I ordered . Still a lot of wait time . Anyhow I got a prs1 stock for it . But shooting the match was the first time I’ve used a chassis system and it was just a better feeling and controllable platform it seamed . My question is the apparition from vudoo . Sams to be a great chassis system what do you think of it or have you ran that chassis ? Also have you herd or done any research on the new 3-60 ?
I was wondering if you have done a review or shot behind the Vortex Strike Eagle scope?
Can you make a video of the top 5 or 10 sniper rifles that you consider to br top of there game
What is that white tape for on your elevation turret?
It the speed dial available from Burris, it allows you to use a dry erase for target marks.
Off topic, but does anyone know what the scope throw lever is on x ring rifle? Like the low profile!
Just goes to show you can have a 6 thousand dollar setup but if you don’t have your technique refined you could just as well be using a $250 Walmart 10/22 and a $35 scope. Not trying to offend anyone just my opinion.
I just wanted to be first at something.
Kyls are no joke. Not easy at that range. Have you had any feeding issues with your vudoo? I've seen a few guys have issues with feeding.
No issues as long as you proof out your mags. Some don’t feed like others .
Hello Ray. I am trying to get into the NRL22. I was looking at these two rifles. CZ Varmint Precision Chassis with the 24'' barrel. Anschutz 1710 XLR 23'' barrel. What rifle scope would you recommend in getting their is so many to choose from. I do not have a price range. I do have around 3arces looking to set up a range for long range shooting. Can you help me in picking out targets for the range to use. If you like I will send you my e mail. Would like your help getting this set up . Thank you for a great video. and sharing.
Thanks David,
I appreciate the comments.
The rifle is going to 100% personal choice. I would however opt for a 20” length. That is all the barrel you need. If you can find a Vudoo I would definitely hold out for one of those if NRL22 and PRS rimfire is your end goal.
Also, we haven’t gotten them yet but the rimfire targets by JC Steel seems like the way to go. They have a NRL 22 package that looks like it will have everything you need to get set up.
I hope that helps.
Do these precision rimfires have barrel degradation, or is that not a thing ya'll need to worry about?
Hello Ray, what base would you recommend (0, 15, 20 MOA) for a Tikka T1X with an Athlon scope with 18 mils of adjustment? It will be used to shoot 50 ~ 250 yards.
I would go 30-40 on all rimfires. So 20 would be my suggestion. 👍🏼
@@XRING Thks!!! 🙌🏻
Why no elbows, Ray?
Too much movement using elbows
For a beginner with a 10/22 semi. What do u recommend for a good budget scope that can do 50yd to 100
Athlon has some decent quality budget glass. With anything shooting related, you get what you pay for.
I love this channels expertice, but i want to know if you all are associated with the lsdl in any way? fair question i think
Can you please do a video on how to do dope cards and hold overs for nrl22?
Sure thing Fred. Will try to get that done soon.
@@XRING thank you. I am just starting out. You explain everything so clearly. For me... Mentoring needed.. Lol
Anytime Fred. This is why I do these videos.
For long range shooting your only use Bolt action? I thought the milatery use autos?
If so what do you recomend for the best made rifle?
He’s shooting it. Vudoo 22lr bolt action. It’s only a 3 thousand dollar rimfire rifle!🤣🤣
Or if you’re asking about what Ray shoots for his centerfire rifle, he uses an Accuracy International bolt action rifle in 6mm creedmoor I believe unless he switched it back to 6.5 Creedmoor or 6mm PRC
🇷🇺 👍 👍 👍
Wandering what bracket you are using for just send it?
MV3 for the Spuhr mount.
@@XRING Tks, appreciated.
Any supplier supply a folding stock for this yet please?? I am like looking under stones now))
Grey birch manufacturing
@@jonathanseal5155 Thank you. I shall peep
@@jonathanseal5155 I could not see this RPR but I asked the question on their contact section, Thanks again.
What kind of ammo do you train with in the Vudoo ?
Lapua Center-X
What kind of ammo do you prefer for matches?
Lapua, SK, or Eley. Try to stay with subsonic ammunition.
Ray, doesn't that expose your bullet to the elements for a longer duration than that of even a "regular" velocity? I heard the high/hyper velocity ammo have some crazy ES... But, pretty consistent velocitied with the regular... Do sub's just have a smaller ES? Or what is your reasoning?
@KrisSays Typically, with subsonic match ammunition, the es and sd’s are much lower. You also don’t have to worry about bullets transitioning from supersonic to subsonic speeds.
👍👌❤️😊🍻🍻🍻🍻🍻🍻🍻
Suppress those things you savages.
Watch his video on what the suppressor does to rimfire accuracy.