16 kg of grain in a 30 L (8 gallons, 32 quarts) mash tun ? I don't think so ! 19 or 19 Kg ? Never. The mash pipe seems larger than 8 gallons. What is the total wattage of the heater in this thing ? 2,000 watts ? Or 500 + 1,000 + 2,000 = 3500 watts ? Is the element exposed or is it under the bottom of the kettle like on the other Robobrews ? The weak point of this system is the controller. Why doesn't KegLand embed an RPi in the base of this thing and let the user run whatever control software they want ? In spite of these comments, KegLand is killing it with these things ! I love how compact it is and the hop filter screen at the bottom of the brew kettle. Love the drain spigot and the extra bottom handle too.
After a few mods to my robobrew, I like it alot. However you guys need to rivit the handles to the pot, one of mine broke off from lifting it with under a gallon of water in it.
Hi, looks great, but can I have a question about your control system? Is that true that in Auto mode, when user sets in some Step for example 71°C for 30 minutes, then the time counter starts immediately after it reaches this step and not after it reaches 71°C? If is this true do you plan any improvements in the future?
KegLand has two main distributors in America. www.morebeer.com and www.williamsbrwing.com It's best to contact these guys directly and they can give you lead times and approximate arrival dates.
I don't have a 15amp socket, but I (right now) run 4800W of heating elements (plus March pump, music amplifier, etc) continuously for up to 3 hours off the same circuit on any brew day. Can I still use the brewzilla at full power? My circuit can handle it.
Nope. I'm running two 2400 watt elements off two points on the same line, as well as my pump, etc, all at the same time, for hours on end. I've never thrown the circuit breaker (and I've been doing it for 5 years now; many times a year). The fuse on the circuit is 30A at 240VAC, not 15A (or 16A which is more common). check out the boil I get, this is on 30L of wort.. rolling hard. I lose about 7L/hr volume when going like this, and I'm in a fairly cold-ish area. ruclips.net/video/JzMYvsBWbC4/видео.html
The answer is it can be done if you use something like this: www.bunnings.com.au/ampfibian-15a-to-10a-mini-d-i-y-power-adaptor_p7050104 So the short answer is yes it can be done but you really want to upgrade your power to 15amp. This will greatly improve you satisfaction with the unit. You might find if the cable in your wall is thick enough all you need to do is change over the GPO on the wall and this is cheap and quick for an electrician to do.
Fabio, as i have been married for forty years ive learnt a valuable lesson when dealing with the wife, i have always found it is better to ask for forgiveness than to ask for permission.
Whats the point of announcing a new product if you dont respond to your consumers? Theres several well known brewing youtube channels asking for product info.... who ever does pr/marketing for kegland needs to be fired lol
Love it! Can’t wait to see it in the states.
Can I suggest the following upgrades?
1. Move the controller to the top
2. Add wifi and bluetooth
3. Integrate a plate chiller underneath.
We are working on the Gen 4 Brewzilla at the moment. Hang tight!
Great work guys! Another great looking product. Be cool to see one in action.
Looks awesome kee!! Look forward to seeing how they perform!
Love the extra handle. Great idea.
This is awesome Kee, look forward to seeing mine mate.
I want one!
@Dion Ross Why's that Dion? A few lads in my brew group have them and havent had any issues.
16 kg of grain in a 30 L (8 gallons, 32 quarts) mash tun ? I don't think so ! 19 or 19 Kg ? Never. The mash pipe seems larger than 8 gallons.
What is the total wattage of the heater in this thing ? 2,000 watts ? Or 500 + 1,000 + 2,000 = 3500 watts ? Is the element exposed or is it under the bottom of the kettle like on the other Robobrews ?
The weak point of this system is the controller. Why doesn't KegLand embed an RPi in the base of this thing and let the user run whatever control software they want ?
In spite of these comments, KegLand is killing it with these things !
I love how compact it is and the hop filter screen at the bottom of the brew kettle. Love the drain spigot and the extra bottom handle too.
After a few mods to my robobrew, I like it alot. However you guys need to rivit the handles to the pot, one of mine broke off from lifting it with under a gallon of water in it.
Is this really happening? I’m in Adelaide and have all ready installed a pulley for the grain tube. How do I get one yesterday!
Why is the price never discussed/compared to other types of brewing methods/systems??
Far out I want one!
Any idea when it will be available in the States??
@@stockwellwork Well then, this doesn't bode well. No response from the maker yet in over a month?? I certainly won't be supporting them.
Ya it would be nice to know if they're available in the US yet
I guess in the states it'll take 240 v
Yep!
Does it come with a ladder? Immersion chiller is a bit old school.
What does the plug look like? In the US for 220V it has to have a dryer or welding plug on the wire?
It needs a 15amp power outlet here in Australia. Best to check with More Beer or Williams brewing in the US to know precisely.
Great work!When it comes to Spain?
I just love ale!
I am with you on that one.
good morning the 30 liter brewzilla the false bottom how much water does it take?
Do you mean how many lites under the false bottom? Its only about 3L.
@@KegLand Thank you very much. I mean, it takes 3lt including the recycling pump deposit? or how much more water does the pump take?
Whats the minimum size batch it will mannage ?
Hi, looks great, but can I have a question about your control system? Is that true that in Auto mode, when user sets in some Step for example 71°C for 30 minutes, then the time counter starts immediately after it reaches this step and not after it reaches 71°C? If is this true do you plan any improvements in the future?
I'm not from Kegland - but yes that is the case - not my preferred method.
What do you use for sparging this beast.
When will the pre-orders be shipped?
Any suppliers over the ditch in NZ guys?
Where can i ask for issues with my Brewzilla 65L 3.1.1?
Best to first go to the retailer that sold it to you. If you still have issues then contact our customer support team via email.
When will it be available in NZ?
Where can i get this in Europe?
How can I get a control board 3.1.1. I’m in the state and no one has it
KegLand has two main distributors in America. www.morebeer.com and www.williamsbrwing.com
It's best to contact these guys directly and they can give you lead times and approximate arrival dates.
I want one for Christmas! Any chance Santa will swing by AU before coming to California?
THIS ITEM IS AVAILABLE FOR PRE-ORDER AND SHOULD BE SHIPPING BY MID FEBRUARY.
I didn't see a double screen in the mash pipe?
That's what I thought too. I've given up using the finer mesh on mine. Seemed to be causing more problems than it was worth.
@Ham Sarris stuck mashes. No such issues without the finer mesh.
I don't have a 15amp socket, but I (right now) run 4800W of heating elements (plus March pump, music amplifier, etc) continuously for up to 3 hours off the same circuit on any brew day. Can I still use the brewzilla at full power? My circuit can handle it.
4800 watt? On a 15 amp circuit. Mathematically impossible even on 240 volts. You sure you're not running a 4800 watt element at 2400 watts?
Nope. I'm running two 2400 watt elements off two points on the same line, as well as my pump, etc, all at the same time, for hours on end. I've never thrown the circuit breaker (and I've been doing it for 5 years now; many times a year).
The fuse on the circuit is 30A at 240VAC, not 15A (or 16A which is more common).
check out the boil I get, this is on 30L of wort.. rolling hard. I lose about 7L/hr volume when going like this, and I'm in a fairly cold-ish area.
ruclips.net/video/JzMYvsBWbC4/видео.html
Will it be available in the UK 🍻
Vocês enviam para o Brasil ? Qual o valor ?
yes 10 gallon batches
Uk suppliers ?
Can this run in regular plug in an apartment?
The answer is it can be done if you use something like this:
www.bunnings.com.au/ampfibian-15a-to-10a-mini-d-i-y-power-adaptor_p7050104
So the short answer is yes it can be done but you really want to upgrade your power to 15amp. This will greatly improve you satisfaction with the unit. You might find if the cable in your wall is thick enough all you need to do is change over the GPO on the wall and this is cheap and quick for an electrician to do.
I have questions in spanish, somebody can help me? Thanks.
I am sorry I do not speak spanish.
@@KegLand I will try in english.
finally!!
Toho Co. Ltd is going to want you to change the name of it.
Mittrøret i meskekaret er for kort det skulle vært lenger får ikke plass til mere en 13 kg.
You can take the tube out and plug the hole completely to get more grain in!
now what excuse will I give to the wife this time?
Fabio, as i have been married for forty years ive learnt a valuable lesson when dealing with the wife, i have always found it is better to ask for forgiveness than to ask for permission.
Whats the point of announcing a new product if you dont respond to your consumers? Theres several well known brewing youtube channels asking for product info.... who ever does pr/marketing for kegland needs to be fired lol
how about they ask KegLand direct like everyone else
www.kegland.com.au/brewzilla-65l-gen-3.html
Umm.....Ummmm......Ummmmmm....very bad English mate....