animeo motor controller - RTS kort og programmering av bryter

[@jakubpaskuj9761]

Tusen takk it helps a lot because manual included with receiver is confusing

[@jimmyserrano3757]

Hi how can i pair animo IB+ 4 motor controler on Decoflex RTS

[@SomfyNordicNorge]

ADDING A DECOFLEX WIREFREETM RTS WALL SWITCH
NOTE: During initial programming it is recommended to provide power only to the motor or RTS receiver being programmed.
1. Set the RTS Receiver or Motor into Programming Mode (Refer to the installation instructions of the relevant RTS receiver or motor for this procedure).
2. Select a Channel to be memorized by pressing the appropriate CHANNEL BUTTON. The adjacent LED will light to indicate the channel has been selected. (See figure 1)
3. Using a paperclip or similar device, briefly press the programming button (1 second max) located on the DecoFlex WireFreeTM switch (See figure 1). The RTS receiver or motor will
confirm the addition of the new DecoFlex switch in their respective manners.
asset.somfy.com/Document/dfed202f-5428-4c49-ba93-ffeb1b644402_RTS%20Decoflex%20WireFree%20Keypad-INSTRUCTIONS_09.2013.pdf?__hstc=149881833.df3471d1eff278d40d1e30db09c3217a.1647939974720.1647939974720.1647939974720.1&__hssc=149881833.1.1647939974720&__hsfp=1534812645&_ga=2.251217665.604234937.1647939972-1760435034.1647939972