How to Replace Wheel Hub & Bearing 2007-2015 Mazda CX-9
HTML-код
- Опубликовано: 22 авг 2024
- Buy Now!
New Wheel Hub from 1AAuto.com 1aau.to/ib/1ASH...
New Wheel Hub Set from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a wheel hub & bearing on your 2007-2015 Mazda CX-9. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2007 Mazda CX-9 Sport 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Mazda CX-9
2008 Mazda CX-9
2009 Mazda CX-9
2010 Mazda CX-9
2011 Mazda CX-9
2012 Mazda CX-9
2013 Mazda CX-9
2014 Mazda CX-9
2015 Mazda CX-9
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obaG/1A...
• Phillips Head Screwdriver 1aau.to/obaG/1A...
• Pry Bar 1aau.to/oMy/1AX...
• 14mm Wrench 1aau.to/oQz/1AX...
• 19mm Wrench 1aau.to/oQz/1AX...
• 10mm Socket 1aau.to/oaV4/1A...
• 14mm Socket 1aau.to/obeA/1A...
• 17mm Socket 1aau.to/obeA/1A...
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 34mm Socket 1aau.to/oT/1AAS...
• Bearing Puller
• Brake Caliper Hanger 1aau.to/ohj/1AX...
• Press
• Needle nose pliers 1aau.to/oAc/1AX...
• Needle nose pliers 1aau.to/oAc/1AX...
• Snap Ring Pliers
• Torque Wrench 1aau.to/oatY/1A...
• Brake Parts Cleaner
• Copper Anti-Seize
• Cotter Pin
• Gloves 1aau.to/oKI/1AX...
• Paper Towels 1aau.to/ozb/1AX...
• Safety Glasses
• Floor Jack 1aau.to/oVr/1AX...
• Hammer
• Wheel Chocks
• Wire Brush 1aau.to/ord/1AX...
Subscribe: / @trq
Check out our playlist:
Mazda CX-9 1st Generation 2007-2015: • Mazda CX-9 1st Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Really easy when everything is antisiezed and new.
You said you were going to remove the bearing while the hub is on the vehicle, and then you ended up removing the hub and using a press.
Damn good job son. Made it look easy
Very good next time rear hub bearing show me
Hola tengo la 09 cx9 y ese mantenimiento lo hago yo y noto que no cambiaste las botas del calibre
Nice job💪🤝🔥👍💯
This video is nearly useless to anyone who doesn’t have a shop press.
Hi friends of TRQ my name is Carlos I'm working in an autoparts and I don't know nothing about cars . So I want to question you, how can i learn all about cars, we sell parts to amarican cars. Obiously I'm looking your videos to see what can I learn of this.