Hey nice update And great shoutouts. That paint job on the truex car is very nicely done. I like the wheels tucked up in there…As for the resin, I’ve built a few resin Indycars. definitely make sure you wash it and then definitely prime it. Paint does not like to stick to resin at all. Once it’s primed and painted handle it as little as possible. Paint adhesion and resin just don’t mix. I wash, prime, paint and decal. Then seal it with clear and set it off to the side. Then when I go to handling it I usually wear gloves so my skin oils don’t rub anything off.
Just found your video. Great content. Love the Valient. Always liked these Mopar body styles. Prayers to you during this most recent storm down your way in Fla. Thanks for sharing.
Thanks for the shout out, I really appreciate that. I do hope your home was okay with that storm. That Valiant will look cool when you get done with it. Sorry I don't know anything about resin bodies, but I would say putting down a good primer would be needed for that. Tamiya rattle can primer is really good.
I like the Valiant. Always like tValuants. I high school I was shopping for a mid 60s Valiant or Dart. There was a guy in my school who got a 62 Valiant. He did most of his day in auto shop. Put a 426 Hemi and a 727 auto in it. Dana 60 in the back. Replaced the "Continental" tire trunk lid with a smooth one. Put 12" cheater slicks on the back. Pizza cutters on the front. Stance was fairly low in front. Roll bar. Painted it bright yellow. He used to drive in the gate that lead to the shop side of auto shop class during lunch. That went right past the cafeteria and pavilions. He'd stop, rev it up, then do a smokey burnout right in the middle of the campus in front of the Principal, cops and most of the student body. Nobody ever hassled him about it. I watched the Mexican American Principal give him a thumbs up once. But they also held lowrider car shows on campus including hydraulics competitions. So I never DID find a good deal on a Valiant or Dart. Wound up buying a 65 VW Bug that I converted into a Baja Bug. I still like 1st and 2nd gen Valiants though.
Nice Shout out for two great guys glad to hear you made it through the storm kinda like up here when they mention Snow milk n bread fly off the shelves nice build for your relative I guess it’s time to tell you We’re Brothers 😊
Thank's Dave. It would be awesome to have a brother like you.I grew up as the only child. It does not mean you get any special treatment. haha. Take care Brother
I'm up in Tallahassee, we get the occasional tropical storms/hurricanes, though not as bad as other parts of Florida. When a storm was approaching I used to like to go to the local Walmart just to watch "the Floor Show". Soccer Moms, Softball Dads and College Kids all literally fighting over bottled water, canned goods, flashlight batteries, etc. Actual 'fisticuffs'! Hilarious. Then I'd go back home where I'm already prepped. 😊
Awesome video bud sorry if i stole your idea. ( What idea did i steal?) I was in the fuel transportation biz for years i feel your pain there. Great up dates thanks for sharing. Be safe on your trip
Thanks Mike, I was doing a all black Porsche with Nascar numbers but I changed my mind when I seen yours. It's probably for the better.Thanks for watching.
On Resin Valiant Get Saw Blades For Exacto Knife Handles gromy Micro Mark Catalogue they Have a 5 Lack Of ,#11 with Saw mase teeth To Cut Hood opening Tamiya Sprjy Oainty Is Super Thinned Lacquer. Yo Get Othet like Testors Enamel uto Apply More Smoothly You Have to Hot Water Sosk Can yo Rsise Paint Yemp to 88-98 Degrees F Ehich Yhins Psint - Rsise Propellant Pressure on sn Gives a Finer --& Smoothet Mist Control on Application
![Summer Walker - Heart Of A Woman [Official Lyric Video]](http://i.ytimg.com/vi/SFddctbZzw8/mqdefault.jpg)
Hey nice update And great shoutouts. That paint job on the truex car is very nicely done. I like the wheels tucked up in there…As for the resin, I’ve built a few resin Indycars. definitely make sure you wash it and then definitely prime it. Paint does not like to stick to resin at all. Once it’s primed and painted handle it as little as possible. Paint adhesion and resin just don’t mix. I wash, prime, paint and decal. Then seal it with clear and set it off to the side. Then when I go to handling it I usually wear gloves so my skin oils don’t rub anything off.
Thank you for the advice and for watching
Thank you for the sub
@@sambaldwin3730 yes sir. No problem at all!
@@sambaldwin3730 you’re welcome!
On Roll Bar Consider Evergreen Box Tubing under it
Thanks for the tip
Great shout outs Sam, beautiful black paint!!
I would have to raise the roll bar up, tires look good inside, enjoy the weekend buddy, 😎👍
Thanks Tom, I value your opinion very much. Thanks
Very nice shout-outs! What an awesome gift. There's a bunch of videos showing how to make an open hood. Have a great time with your son
Thank you and thanks for watching
Great shoutout for Billy. Glad to hear you made it thru the storm safe. Really cool updates👍
Thanks 👍
Thanks for the updates on your works in progress, love that Valiant!
Thanks for watching
Great shout out's.....
Thanks for watching
Nice shout out. Both projects look Good. I would leave the resin body as is. I'll be watching
Thank you for watching and the comments
Awesome Shout-outs Sam... Man you can only do what ya can do. Just be safe my friend!
LLAP 🖖
Thank you for your kind words.
Cool Valiant. IMO, raise the rollbar and the tires inside the wheel well's. Looks really Good Sam.👍👍
Thanks Marcus
Just found your video. Great content. Love the Valient. Always liked these Mopar body styles. Prayers to you during this most recent storm down your way in Fla.
Thanks for sharing.
Thanks for stopping by. Thankfully we did ok in the storm. Keep praying for the other ones that we not so lucky
@sambaldwin3730
Yes of course. So sad
Nice shoutouts, cool projects.
Thanks for the visit
Thanks for the shout out, I really appreciate that. I do hope your home was okay with that storm. That Valiant will look cool when you get done with it. Sorry I don't know anything about resin bodies, but I would say putting down a good primer would be needed for that. Tamiya rattle can primer is really good.
My home is good, just a lot of street flooding. Thanks for the advice and watching
Looks great.
Thanks!
I like the Valiant. Always like tValuants. I high school I was shopping for a mid 60s Valiant or Dart. There was a guy in my school who got a 62 Valiant. He did most of his day in auto shop. Put a 426 Hemi and a 727 auto in it. Dana 60 in the back. Replaced the "Continental" tire trunk lid with a smooth one. Put 12" cheater slicks on the back. Pizza cutters on the front. Stance was fairly low in front. Roll bar. Painted it bright yellow. He used to drive in the gate that lead to the shop side of auto shop class during lunch. That went right past the cafeteria and pavilions. He'd stop, rev it up, then do a smokey burnout right in the middle of the campus in front of the Principal, cops and most of the student body. Nobody ever hassled him about it. I watched the Mexican American Principal give him a thumbs up once. But they also held lowrider car shows on campus including hydraulics competitions.
So I never DID find a good deal on a Valiant or Dart. Wound up buying a 65 VW Bug that I converted into a Baja Bug. I still like 1st and 2nd gen Valiants though.
Thank you and that is a really neat story. I remember those fun high school days
Great update and shop cards Sam. Ron
Thanks 👍
Thanks, I'm glad you like the card!
Thank you.
Nice Shout out for two great guys glad to hear you made it through the storm kinda like up here when they mention Snow milk n bread fly off the shelves nice build for your relative I guess it’s time to tell you
We’re Brothers 😊
Thank's Dave. It would be awesome to have a brother like you.I grew up as the only child. It does not mean you get any special treatment. haha. Take care Brother
Thanks that’s nice of you to say Sam
I'm up in Tallahassee, we get the occasional tropical storms/hurricanes, though not as bad as other parts of Florida. When a storm was approaching I used to like to go to the local Walmart just to watch "the Floor Show". Soccer Moms, Softball Dads and College Kids all literally fighting over bottled water, canned goods, flashlight batteries, etc. Actual 'fisticuffs'! Hilarious. Then I'd go back home where I'm already prepped. 😊
awesome sam !! cool shoot outs !
Thank you sir
Awesome video bud sorry if i stole your idea. ( What idea did i steal?) I was in the fuel transportation biz for years i feel your pain there. Great up dates thanks for sharing. Be safe on your trip
Thanks Mike, I was doing a all black Porsche with Nascar numbers but I changed my mind when I seen yours. It's probably for the better.Thanks for watching.
On Resin Valiant Get Saw Blades For Exacto Knife Handles gromy Micro Mark Catalogue they Have a 5 Lack Of ,#11 with Saw mase teeth To Cut Hood opening Tamiya Sprjy Oainty Is Super Thinned Lacquer. Yo Get Othet like Testors Enamel uto Apply More Smoothly You Have to Hot Water Sosk Can yo Rsise Paint Yemp to 88-98 Degrees F Ehich Yhins Psint - Rsise Propellant Pressure on sn Gives a Finer --& Smoothet Mist Control on Application
Thanks for the info