CAR AC BLOWER FAN CLEANING | AT HOME | HOW TO | POLO | FABIA | JETTA | AUDI | VOLKSWAGEN

Поделиться
HTML-код
  • Опубликовано: 20 окт 2024

Комментарии • 177

  • @abyfvarghese1359
    @abyfvarghese1359 3 года назад +7

    This video was very helpful.. my ac blower motor makes rattling noise whenever car hits a pothole. It was very annoying. When I opened the motor the shaft was covered with dust and minor rust. So I lube the shaft and clean the motor. Now the sound is gone and the fan speed is slightly increased. All credit goes to you sir . Thank you ....

  • @ur67tube
    @ur67tube Год назад +2

    My polo ac blower is making noise and tomorrow morning I am planning to fix the issue..thank you and keep posting 👏👍

  • @dipankarkay6467
    @dipankarkay6467 Год назад +3

    I love your contents...the way you explain every bits nd the simplicity.....I wish I could take my polo to you for getting things done and kear from you....❤

  • @sudhakara7581
    @sudhakara7581 3 года назад +4

    Sir, Really appreciate your efforts to bring DIY stuff to common platform and help others. Video is kept simple and clean which shall help beginners to start DIY . Keep going and expecting more DIY videos.

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Thanks a lot sir 🙂

    • @sudhakara7581
      @sudhakara7581 3 года назад

      And I also wish to add a point that it would be appreciated if you could say price of the parts you use.

    • @yourDIYneeds
      @yourDIYneeds  3 года назад +1

      Sure sir , i will include from now on 👍

    • @sudhakara7581
      @sudhakara7581 3 года назад +1

      @@yourDIYneeds Thanks sir

  • @karthiks1713
    @karthiks1713 3 года назад +2

    It's great that you are showing the hot to video.
    I also request you to show the unbolting process from your next videos for clear representation too so that we will be able to get it confident.
    Thank you brother.

  • @syedmatni4148
    @syedmatni4148 Год назад +1

    thank you, your explaination is easy to understand 👍

  • @jagmohanrathi9788
    @jagmohanrathi9788 3 года назад +1

    That was very informative. Better lighting was needed. But i guess if you are alone, it is tough juggling your talk, your task and the camera!

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir thats kind of limitation , being alone and doing everything 👍

  • @pradipsingh6279
    @pradipsingh6279 3 года назад +1

    You make very much usefull videos

  • @gauravbhardwaj9809
    @gauravbhardwaj9809 3 года назад

    Good! My dear friend auto Google. Saw videos on other utube channel for same issue but was waiting for your video before going for any DIY!.

  • @PANKAJCJ
    @PANKAJCJ 2 года назад +1

    Very neatly explained.

  • @raghavdevda3542
    @raghavdevda3542 3 года назад +5

    When fun meet perfection

  • @tatianapopova9734
    @tatianapopova9734 3 года назад +2

    Hi! Thank you so much for very useful video. I have a question about lubricant you are using for the motor. There are so many on the market, so hard to know what is the correct one. Could you, please, give some names or keywords for choosing. Thanks again!

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir any good spray lubricant will work , a decent brand like castrol , motul , etc

    • @tatianapopova9734
      @tatianapopova9734 3 года назад +2

      @@yourDIYneeds Thank you for your kind answer! I was today in an auto shop, they suggested WD40. Would it be OK? If not, what out of Google suggestions should I use: Castrol Chain spray O-Ring, DWF, Silicone Spray? Thanks a lot again! :)

    • @yourDIYneeds
      @yourDIYneeds  3 года назад +1

      Chain spray will work sir

  • @bhushanl3456
    @bhushanl3456 3 года назад +1

    Paaji Good to see u again .... even i had the same issue on my vento but was scared to do it 😬 so got it done outside from the mechanic n filled the gas also as there was less cooling n things were fine.... paaji tusi chaa gaye ho 🤗... paaji Q & A still pending... eagerly awaiting for it 😊 N wishing u a very Happy n safe Diwali 🪔.

    • @yourDIYneeds
      @yourDIYneeds  3 года назад +1

      Thankyou paaji , happy diwali to you too paaji 🙂🙂

    • @bhushanl3456
      @bhushanl3456 3 года назад

      @@yourDIYneeds Thank u paaji 😊

  • @davidheredia5835
    @davidheredia5835 4 месяца назад +1

    Would blowing with a compressor help cleaning?

  • @udayraikal3396
    @udayraikal3396 Месяц назад +1

    There is a foul smell coming from ac vents even after changing cabin filter nd disinfecting , does cleaning this motor will help me?

    • @charleschilaule6675
      @charleschilaule6675 Месяц назад

      Have the same problem

    • @yourDIYneeds
      @yourDIYneeds  Месяц назад

      Foul smell is due to formation of algae and fungus in high humidity environments , just try to disinfect , it will go away

  • @suganyakannan632
    @suganyakannan632 3 года назад

    Thank you for this video clip. I tried to clean the louvers of the central two vents using a cloth in my Skoda rapid. Alas! They got dislodged and fell inside! Can you please guide how do I retrieve the louvers that fell inside?

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Thats a tough one sir 😓😓 , needs disassembly , alot of disassembly

  • @kuldeeprathore8688
    @kuldeeprathore8688 3 года назад +1

    Bhai you r doing good job. God bless you dear
    Today first time I have seen your videos on VW polo, service.
    I have a query, in evening first I had driven a vento and the experience was amazing and from that time I have been watching videos on VW cars service and maintenance. I found ki market me service mehngi nahi h sayad.
    So plz suggest me should i buy vento or any VW polo without any hesitation. plz also tell which car petrol or diesel is good for me

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir both are identical in nature polo or vento , even same car vento just has a boot .
      Petrol or diesel , that totally depend on your choice , which exites ypu more a diesel or petrol !

    • @kuldeeprathore8688
      @kuldeeprathore8688 3 года назад +1

      @@yourDIYneeds 😊🙏

  • @LAZER-PALDZOR
    @LAZER-PALDZOR 3 года назад +1

    Brother how can i tight up my glove box latch for vw polo it has become very loose and rattles irritating its closes qnd open just fine but its just it has too much of play big space

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir for glove box , latch can not be adjusted but the rubber bumps on both the top ends can be , they have a hole in the middle , and they have a T15 screw inside , you can just make them a Little loose as per your need

    • @LAZER-PALDZOR
      @LAZER-PALDZOR 3 года назад +1

      Wow thankyou mate il try it. Yes I've seen that round type rubber

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Yes sir , exactly that

  • @redlionsint.5550
    @redlionsint.5550 Год назад +1

    मैं अपनी पोलो कार के सारे काम स्वयं ही करता हूं , हमारे राज्य में vw की सर्विस और एक्सपर्ट नही हैं ।
    मेरे शहर की तीन कारों के प्राइमरी वर्क करता हूं फ्री में 😊

  • @dipankarkay6467
    @dipankarkay6467 Год назад

    My climate control is not working the display shows nd buttons work fine but blower fan doesnt rum nd cold air doesn't flow....plz suggest wat to check for ?

    • @yourDIYneeds
      @yourDIYneeds  Год назад

      Sir sometimes the blower rotary control gets messed up , and doesn't respond , if everything else except the blower control is working then its the only suspect

  • @yyvivek109
    @yyvivek109 2 года назад

    Nice video. I noticed footwear lights in your Vento. I don't think they are OEM. I want to install these in my Jetta. Could you share the source from where I can buy. Thanks

    • @yourDIYneeds
      @yourDIYneeds  2 года назад

      Sir they are OEM in 2nd generation polo and vento on highline models , and can also be installed in 1st generation

  • @vrushabhfasge2346
    @vrushabhfasge2346 7 месяцев назад

    In my polo the airflow from left and right vents is little less than the center ones. We can feel the difference between the flow when ac blower is turned on

    • @yourDIYneeds
      @yourDIYneeds  6 месяцев назад

      Sir air control flap needs to be calibrated again

    • @vrushabhfasge2346
      @vrushabhfasge2346 6 месяцев назад

      @@yourDIYneeds can u tell the process ?

    • @yourDIYneeds
      @yourDIYneeds  6 месяцев назад +1

      @vrushabhfasge2346 sir you can do it either by VCDS or obdeleven interface , its just a 2 min job , nothing much

    • @vrushabhfasge2346
      @vrushabhfasge2346 6 месяцев назад

      @@yourDIYneeds well thanks for sharing ✌🏻

  • @hellfire47
    @hellfire47 3 года назад

    Great one! Also, can we clean the evaporator without completely removing the dashboard?

    • @yourDIYneeds
      @yourDIYneeds  3 года назад +1

      Yes sir , after removing the fan blower , evaporator is clearly visible and accessible of the right side .

  • @logesh3idi
    @logesh3idi 2 года назад

    Bro,in my vento when i press the recirculation button the auto mode cuts off and when i press the auto button recirculation mode turns off.its never working together.recently change flap motor also.Your advice please.

    • @yourDIYneeds
      @yourDIYneeds  2 года назад

      Sir to be true i never paid attention to this 😅,
      I ll try to replicate the same thing tommorow and get back to you

  • @vijaysutar8310
    @vijaysutar8310 3 года назад

    Sir, I am planning to switch to k&n stock air filter of vento tdi dsg is it worth & change in performance..Plz replay.

    • @yourDIYneeds
      @yourDIYneeds  3 года назад +1

      Sir , there is no diffrence in performance apart from the induction noise , and even a compromise , because its proved that k&n filter are not good at filtering fine dust , whereas the OEM filter is quite good at it .
      One more disadvantages is that k&n uses oil on filter which starts to kill the MAF sensor .
      So sir i would not recommend it .

    • @vijaysutar8310
      @vijaysutar8310 3 года назад

      Thanks sir for reply..

  • @jaswantfreedish519
    @jaswantfreedish519 3 года назад

    Very good phaji

  • @akhilpramod5614
    @akhilpramod5614 Год назад +1

    Hey man, so i did the same process along with removing the blower, removed the bushing etc. However after reinstalling everything, the blower motor is giving off vibration in 3 and 4 fan speed. What could be the issue? Can i fixx it?

    • @yourDIYneeds
      @yourDIYneeds  Год назад

      Sir you didn't clean it properly, every blade of the blower needs to be cleaned , even if there is 1gram of dust on one side , its sufficient to make the blower disbalance and induce vibrations

    • @akhilpramod5614
      @akhilpramod5614 Год назад

      @@yourDIYneeds i did, also the vibration was not an issue before.

    • @yourDIYneeds
      @yourDIYneeds  Год назад

      Did you removed any sort of clip from the fan blades ?

    • @akhilpramod5614
      @akhilpramod5614 Год назад

      @@yourDIYneeds no, i made sure it is still there

    • @yourDIYneeds
      @yourDIYneeds  Год назад

      Cleaned it well ? Dust and lint ?

  • @rakeshdeka5149
    @rakeshdeka5149 2 года назад

    Sir mera polo tdi 2012 mey Ac compressor tip Marta ha. mechanic ko dekhiya bo bola Ac blower under ek sensor kharab ha. That sensor that control the temperature in the cabin...kuch idea dey sakta

    • @yourDIYneeds
      @yourDIYneeds  2 года назад

      Sir ac cut hone ke 3 reason ho sakte hai
      1. System me gas pressure kam hai
      2. Condenser wash hoga , kuki wo heat ko bhar ni nikaal pa raha
      3. Electrical fault ( sensor ,ya climate control unit me problem )

    • @rakeshdeka5149
      @rakeshdeka5149 2 года назад

      @@yourDIYneeds I have done 1 and 2 ... but there a sensor with the blower which is showing fault

    • @yourDIYneeds
      @yourDIYneeds  2 года назад

      Sir then you need to replace that sensor

  • @akshitchopra7984
    @akshitchopra7984 3 года назад

    On 1 or 2 fan my vento ac is making a chirping sound upon showing it to mechanic he says need to replace blower motor, possible to fix by just cleaning like u did?

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Yes , that bottom and top bearing needs to be greased , they have gone dry and now making screeching noise . , Exactly same process needs to be followed

    • @rajeshk9795
      @rajeshk9795 2 года назад

      How did you remove motor from housing? That part was missing in video

    • @yourDIYneeds
      @yourDIYneeds  2 года назад

      Sir it was just removing the screws , and pulling the motor out .

    • @rajeshk9795
      @rajeshk9795 2 года назад

      @@yourDIYneeds i dont find any screws in the motor and housing in laura. I have already taken it out from car . Now need to lubricAte the bottom screw which am unable to do with out removing the housing

    • @yourDIYneeds
      @yourDIYneeds  2 года назад

      Can you send a clear photo of the unit from multiple angles , so that i can check !
      everydaydiyhelp@gmail.com

  • @flyfarmer
    @flyfarmer 3 года назад

    Nice information sir ji

  • @robyjoseph2305
    @robyjoseph2305 2 года назад

    Thanks for the video.
    I'm using a 2012 polo and there is "tap tap" sound when I switch on the key. It will last for one minute and then disappear. But when I turn on the ac and the recirculation mode is off, it start to sound. I showed it to ASC and they said the blower should be replaced. Can I repair it myself without replacing..?
    Also, there will be a smoke or chemical smell in the car when I run the ac in recirculation mode..I did 3M cleaning but still I can feel the Smell when I go for long trips...could you please help me to sort it out..?
    Thanks

    • @yourDIYneeds
      @yourDIYneeds  2 года назад +1

      Sir the tap tap sound , is ac recirculation flap opening and closing to verify its end to end points
      And the smell you encounter can be of fuel , as the tail pipe is facing downward and on idle the smoke emissions from the tale pipe gets trapped under the body of the car , if the recirculation flap is not properly closed then the blower unit will pull air from outside and you will experience a smell , the thing we can do is circulation flap motor calibration , it can be done via VCDS or Obdeleven , and flap and the sealing surface for the flap needs to be cleaned as it collects alot of dust , so that it can seal against the opening properly .

    • @robyjoseph2305
      @robyjoseph2305 2 года назад +1

      @@yourDIYneeds thank you.

    • @robyjoseph2305
      @robyjoseph2305 2 года назад

      @@yourDIYneeds regarding the unusual sound; I opened the glove box and and I believe the noice is coming inside the blower. Is it because of the dust the accumulated on the blower...?

    • @yourDIYneeds
      @yourDIYneeds  2 года назад

      Sir it can be because of blower , clean the blower , flap assembly and lubricate the blower bearing as well
      It will be ok

    • @robyjoseph2305
      @robyjoseph2305 2 года назад +1

      @@yourDIYneedsI removed yhe blower based on your video..you are right..it's because of the recirculation flap

  • @FaizanKhan-iw2sp
    @FaizanKhan-iw2sp 3 года назад

    Sorry to bothering you I have a problem with polo tdi when I turn the heater on RPM goes up to 1100 do you have any ideas?

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir heater or ac ?
      It is something which happens only when ac is on , and that too on 900-950
      If its happening at heater as well then i suspect there us something wrong with your climate control unit , (which maybe turning ac and heater on at same time)

    • @FaizanKhan-iw2sp
      @FaizanKhan-iw2sp 3 года назад

      @@yourDIYneeds yeah that's right ac light come up when I turn heater on,

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Yes sir , thats definately climate control going bad

  • @shamskl3245
    @shamskl3245 8 месяцев назад

    vacum is the best to use it for this job

  • @MrCrazychipper
    @MrCrazychipper 2 года назад

    Where did you get the pedal covers ? I need it.. BTW, video is very informative 👍🏻

    • @yourDIYneeds
      @yourDIYneeds  2 года назад +1

      Sir it was ordered from AliExpress , when it was not banned in india . They are also available on amazon , sharing a link
      amzn.to/3J2a5Xi

  • @lesjinjoe110
    @lesjinjoe110 2 года назад

    Bro. In my VW Polo, air is not blowing in the Middle two vents. But , from the other each vents location at the two ends Air is Blowing. What could be the problem?

    • @yourDIYneeds
      @yourDIYneeds  2 года назад

      Sir its air circulation vent , which is inside the HVAC unit , maybe the flap is stuck or the motor which controls the flap , gone bad . ( In automatic climate control system)
      If it's manual then the wire may have got loose from the anchoring point .

    • @lesjinjoe110
      @lesjinjoe110 2 года назад

      @@yourDIYneeds ok. Need to show to service 🤦🏻‍♂️

    • @yourDIYneeds
      @yourDIYneeds  2 года назад

      Yes it will be better 🙂

  • @MrNobody-tz6cg
    @MrNobody-tz6cg 3 года назад

    bro, what could be the problem if recirculation flat motors is not fully functioning . the lower vent is not working due to flap motor is not moving . any tips to fix at home as there is lockdown here .

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      sir , have to check first that flap is not stuck , as it can sometimes due to dust accumulation , then the motor which rotates the flap will be on the suspect list , and in some rare cases wiring issues can also be the reason .

    • @MrNobody-tz6cg
      @MrNobody-tz6cg 3 года назад

      @@yourDIYneeds i think its wiring issue . how can we check for bad wiring.

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir , have to check physically

    • @MrNobody-tz6cg
      @MrNobody-tz6cg 3 года назад

      @@yourDIYneeds yes i check it by watching ur video and some function are ok n some are not.

    • @MrNobody-tz6cg
      @MrNobody-tz6cg 3 года назад

      bro, can u help me to fix flap motor in vw polo 2013 1.2 petrol highline. actually flap motor is working but when i press downward air flow button it does nothing. pliz give me some suggestion. air is coming from others vents accept the downward vent is the problem. help pliz.

  • @AnishGandhiburger
    @AnishGandhiburger 3 года назад

    Sir are you from Delhi, if yes can you perform the same on my car, same problem Audi A4

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir yes i m from delhi , but sir i don't have a shop , i m a hobbyist , its a work which can be done on your own , just need simple tools and a little patience

    • @AnishGandhiburger
      @AnishGandhiburger 3 года назад

      @@yourDIYneeds actually the system on the Audi Is way complicated that the Volkswagen, so I don't think it's as simple as the one you showed, so probably will get it done from a professional

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir placement of blower motor maybe different , as q3 also have different blower placement .

    • @AnishGandhiburger
      @AnishGandhiburger 3 года назад +1

      @@yourDIYneeds maybe, will get it checked from someone, but thanks for the video, now I got to know where that noise in the AC was coming from

  • @sushilmaurya5820
    @sushilmaurya5820 3 года назад

    I have an issue on my tata safari dicor 2011 model without pressing accelerator paddle rpm raise at 1500 to 2000 rpm what was the problem and fuel filter warning lamp will display in instrument cluster how to fix this problem

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir fir the light on tha dash you have to flush out the sedimentor ( I have a video on the channel ) and for rpm issue if it doesn't get resolved by the sedimentor then we have to check the throttle position sensor , which is located on the acclarator pedal itself

    • @sushilmaurya5820
      @sushilmaurya5820 3 года назад

      @@yourDIYneeds sir konsa video plz give me the link of the video

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir here it is
      ruclips.net/video/8-DSg8WBStE/видео.html

  • @guddukailash4585
    @guddukailash4585 3 года назад

    Changing dog bone mount helps?

    • @guddukailash4585
      @guddukailash4585 3 года назад

      Driven approximately 140000 kms not changed yet

  • @bhaveshbondarde
    @bhaveshbondarde Год назад

    Blower ka screwdriver konsa hai

  • @Chowdarychanamolu0014
    @Chowdarychanamolu0014 3 года назад

    Make a video on hot to clean Ac vents on safari brother

    • @yourDIYneeds
      @yourDIYneeds  3 года назад +1

      Sir alredy a video on it , coil cleaner as well whole system cleaning by a foam cleaner by 3m

    • @Chowdarychanamolu0014
      @Chowdarychanamolu0014 3 года назад

      @@yourDIYneeds thanks a lot brother just saw videos of front and rear Ac clean process love you brother

  • @bhaveshbondarde
    @bhaveshbondarde Год назад

    Mera AC na chalu rehta hai par Uska air those time bad band hooh jata hai pata nahi par AC full speed pe chalta hai blower bhi chalu rehta hai Aur AC vent uske upper side dashboard pe air jata hai sab pata nahi any idea kya hua hoga ???Resistor ???

  • @bhuvanpuri7699
    @bhuvanpuri7699 Год назад +1

    Polo♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️

  • @atishayp2186
    @atishayp2186 3 года назад

    Dude where is the actuator ?

  • @urgentdata6670
    @urgentdata6670 3 года назад

    भाई प्लीज मेरे सवाल का रिप्लाई जरुर करना भाई
    भाई मेरी vento के climate control पिछले 1 साल से करंट नहीं आ रहा जिस कारन मेरी गाडी का ac और blower दोनों काम नहीं कर रहे हैं. भाई कम्पनी कह रही है के आपका dashबोर्ड खोलना पड़ेगा जो मुझे मंजूर नही भाई क्योकि गाडी नई है भाई . भाई में यह जान ना चाहता हु की अगर हम अपने blower मोटर को direct 12 volt करंट दे दे तो क्या blower चल जयेगा ? उसको on off करने के लिए अलग से dash बोर्ड में स्विच लगा देंगे. ऐसे ही भाई क्या ac का compressor direct battry से 12 volt देने से चल जयेगा ? भाई में खुद यह करने की सोच रहा था. के direct ac compressor और blower मोटर को battry से करंट दे के उसकी २ स्विच dash बोर्ड में लगा दूंगा भाई .भाई क्या ऐसे हो जयेगा? गाडी में?

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Ji sir , hum aisa kar sakte hai , lekin bilkul hi last option hai ye . Company wale dashboard ke lie islea bol rahe hai kuki unko BCM utarna hoga , check karne ke lie ki wo voltage supply ku nahi kar raha hai . Ya phir basic wiring check ki kahi cut na ho

    • @urgentdata6670
      @urgentdata6670 3 года назад

      @@yourDIYneeds thanks lots lots lots of bhai for reply . god bless you dear brother ..bhai lekin jab wo dashboard kholte hain toh sare dashboard pe deep scratches daal dete hain bhai aur windws ke inner plastic covers pe bhi bhai. esi lyie main dashboard nahi khulwa raha bhai.

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Ha sir , ye baat to sahi hai , scratches and marks to aa hi jate hai

  • @SujoyShivde
    @SujoyShivde 3 года назад

    Nice!

  • @Ashish_Vines
    @Ashish_Vines Год назад

    Rubber boots (motor mount) kaha milega meri motor housing se bahar nikal ja raha he jhatko me

  • @ahmadalbab5448
    @ahmadalbab5448 3 года назад

    Condenser?

  • @guddukailash4585
    @guddukailash4585 3 года назад

    Sir i upgraded my tyre size to 195 60 15 continental uc 6 some times ride quality is rough what could be the reason

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir it also depend upon the tyre compound

  • @shindenavnath624
    @shindenavnath624 3 года назад

    Urgently msg please reply fast sir
    Safari strome ka brake ka bleeding procedure batana please urgent hai sir

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir same hai Dicor jaisa .
      Aap video refer kar sakte hai channel pe

    • @shindenavnath624
      @shindenavnath624 3 года назад

      @@yourDIYneeds maine apke brake sysytem ke pure video dekhe wo sabhi brake fluid change karne ke hai.
      Lekin mers pass jo strome veh aai hai uska maine rear wheel cylinder kit new fit kiya to abhi system me air hai wo bleeding se nahi ho rahi release kya scan tool ka use karna padega air ko release karne ke liye

    • @yourDIYneeds
      @yourDIYneeds  3 года назад +1

      Nahi sir air to bleed hoke hi niklegi

    • @shindenavnath624
      @shindenavnath624 3 года назад +1

      @@yourDIYneeds Thanks for supporting 🙏

  • @karanbadesha6781
    @karanbadesha6781 2 года назад

    Jinho nai eng mai sunna hai na bhai..unke paas foreigners se bahut videos mil jaye gi..aur tum dono se reh jao ge..kyu ki na to hum ko smj aye gi eng ki.aur na he unko jinko eng aati hai..

  • @guddukailash4585
    @guddukailash4585 3 года назад

    Ride becomes bumpy if i increase tyre pressure

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Yes that's due to the stiffer sidewalls of tyres

  • @guddukailash4585
    @guddukailash4585 3 года назад +1

    Tyre pressure 30 psi

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir performance tyres are usually rough , same is uc6
      Sir Increase the pressure to 33-34 or you are risking the tyre for sidewall cuts

  • @sripal3298
    @sripal3298 3 года назад

    Tata Sonu gold gx center lock remote not work

    • @yourDIYneeds
      @yourDIYneeds  3 года назад

      Sir video hai center locking ki channel pe safari ki , aap wo check kar lijiye

  • @gulamerabbani2889
    @gulamerabbani2889 3 года назад +1

    Bhai fabia me Ye System Nhi He

  • @mohammedarfath5525
    @mohammedarfath5525 3 месяца назад

    😢

  • @gurumotorvadgam3354
    @gurumotorvadgam3354 Год назад

    લોડા અંગ્રેજી ની ઓલાદ 🥵