Vauxhall Mokka (2014) CDTI-No crank/No start!

Поделиться
HTML-код

Комментарии • 28

  • @micksautoelectrics8750
    @micksautoelectrics8750 5 лет назад +1

    Immobiliser wouldn`t make it cut out on the motorway, I`d be checking wiring to ECM

    • @sandyande
      @sandyande  5 лет назад

      Agree Mick, I'll wait and c what main dealer comes back with for warranty claim, but my problem is I don't have wiring diagram! Cheers sandy

  • @TheRealQO0Q
    @TheRealQO0Q 2 года назад +1

    Had same problem was in Vauxhall for 4 weeks Ended up erg valve

  • @martynellis410
    @martynellis410 4 года назад

    The bcm module on these is behind the fuse box on the passenger side in the glove compartment incase anyone ever needs to know where it is

  • @8power0
    @8power0 5 лет назад

    IS THERE A PART TWO TO THIS VIDEO LOOKS INTERESTING THANKS .

  • @cedric344
    @cedric344 11 месяцев назад

    Je possède Opel Mokka 1.7 CDTI 2013 avec code défaut p161e prechauffage sur diagnostique Delphi. Je ne trouve pas le relais préchauffage sur cette voiture 😢

  • @ljthemechanic7865
    @ljthemechanic7865 5 лет назад

    Hey Sandy, looks like another interesting one and I'm keen to find out what the outcome is. Just as a sidenote in the video you activated the starter relay and could hear it clicking, but was the starter itself tested, just thinking it could be starter related

    • @sandyande
      @sandyande  5 лет назад +1

      Hello my friend, it was actually the run/crank relay that I was controlling but I wished I had manually activated the starter relay, cheers sandy

    • @ljthemechanic7865
      @ljthemechanic7865 5 лет назад

      @@sandyande I'm intruiged to see what the outcome of this one is, no doubt I will be gifted some through the doors at work in the future

  • @familyman831
    @familyman831 2 года назад

    Where is the crank sensor on the 1.6 petrol ?

  • @davidcallahan2301
    @davidcallahan2301 Год назад

    Just had this problem,just in front of the battery ther is a main earth wire go the chassis leg was making a bad connection and had the same faults as this hope this will help someone

    • @kevinhancock4064
      @kevinhancock4064 7 месяцев назад

      I'm trying to help friends was yours not cranking ?

    • @davidcallahan2301
      @davidcallahan2301 7 месяцев назад

      No ther was no cranking and loads of communication faults,someone had done a clutch and never tightened it rite

  • @davesterl
    @davesterl 5 лет назад

    Do you have a zedbull to test the transponder in the key? Or spare key

    • @sandyande
      @sandyande  5 лет назад

      Hi Dave, I've not got a zedbull but I'll get my sister to check her spare key cheers sandy

  • @tosspot-007
    @tosspot-007 4 года назад

    Hi sandy did you ever find out what was the fault with mokka

    • @sandyande
      @sandyande  4 года назад +4

      It was an insurance job so the main dealer ending up replacing fuse box and pcm my sister said, so we will never really know root cause because they probably flung parts at it! Joe from V4vauxhall said it was probably fuse box issue! Cheers sandy

  • @danman9017
    @danman9017 5 лет назад

    could it be a module taking down the can bus

    • @sandyande
      @sandyande  5 лет назад

      Might be Dan man but without a wiring diagram I'm stuck! Cheers sandy

  • @tonypond8196
    @tonypond8196 5 лет назад

    sandy i can get you a wiring diagram for it or alldata have a 5 day free trial you can get it on there ,

    • @sandyande
      @sandyande  5 лет назад

      Cheers Tony, one of my subscribers got me one, many thanks, sandy

  • @v4vauxhall498
    @v4vauxhall498 5 лет назад

    Sandy did it breakdown on the motorway , or was it an attempted restart after stopping. My main focus would be on BCM.

    • @sandyande
      @sandyande  5 лет назад

      Hi Joe, yes broke down on motorway but had low power with cutting out before. She said AA had car cranking but no start and he spent 2 hours with it! Cheers sandy

  • @MrAsadEp
    @MrAsadEp 5 лет назад

    Get yourself on Steve's page sandy, I'm sure a friendly group of people would be more than willing to help a nice gent like yourself out!

  • @8power0
    @8power0 5 лет назад

    HELLO THERE NICE VIDEO , I WAS JUST WONDERING DOES JOE FROM V4VAUXHALL HAVE A RUclips CHANNEL AND THANKS FOR THE GREAT VIDEOS . BY THE WAY HOW HARD ARE THESE VAUXHALL'S TO WORK ON AND THANKS SO MUCH FOR YOUR TIME PLEASE KEEP UP THE GREAT WORK .

    • @sandyande
      @sandyande  5 лет назад

      ruclips.net/channel/UC_Gajr3pednl1dB6FIUlZAg

    • @8power0
      @8power0 5 лет назад

      @@sandyande THANK YOU SANDY !