You should emory the shaft with the provided emory cloth to protect the orings when you put the new seal on. At least I do, because I'm not going back out in the field to put another seal in for free.
I have 4 of them they're missing on along with a brand spanking new one in the box wrapped with plastic. I cut the plastic to see if I could see one on that one.. Nope! They need to supply those with the seal kit imo.
Thanks ! Do you have any idea of what length is the shaft pin for a CR15 ? I am having trouble with a CR15-08, I am using a factory new Kit chamber Stack and a new shaft seal but it seems to be the customer lost the shaft pin so I made one but I am having a bad noise when the pump starts.
That is incorrect. This is the way to set the shaft height per Grundfos' work instructions. For more information, reference Grundfos product literature LCR-STK-152. Thanks for watching!
You might have the pump shaft "stack" too high or not high enough. That gapping tool on the seal is what your suppose to be setting it at. Or your stack is going out is the other possibility.
On The Goulds Pump you don't have to mess with the motor at all . Sooo much Better than Grundfos. We had a miura boiler with cre 8 pumps. No Loop system to keep pump running all the time . The stack bearings kept going out every few weeks . Or the Nut on the bottom of the shaft would come lose and the stack would drop and rub on the housing . I would never Recommend Miura Boilers or your Cre 7 8 or 10 Pumps on most feedwater systems. Junk and a pain in the ass . for the Maintenance and or Boiler Engineer . Hope fully you guy's upgraded your product .
Beautiful workmanship there, thanks for sharing.
thanks a lot for your detailed information
thank you very much,it helps,
I have a CRX8, shaft seal is leaking,
Very nice work.
thanks for this info..how to get spare part. ?
Sir do you have video of grandfos Cr 20-4 assembly fitting
Thanks for sharing ❤
L'eau savonneuse pour ? Détecter une éventuelle fuite ?
Merci pour le partage 😊
Very nice.like it very clear
You should emory the shaft with the provided emory cloth to protect the orings when you put the new seal on. At least I do, because I'm not going back out in the field to put another seal in for free.
Thanks Sir My problem solved this video thanku soo much
6:20 Can anyone tell me the thickness of that shaft key? This tool is missing at my pump :-(
I have 4 of them they're missing on along with a brand spanking new one in the box wrapped with plastic. I cut the plastic to see if I could see one on that one.. Nope! They need to supply those with the seal kit imo.
Thanks ! Do you have any idea of what length is the shaft pin for a CR15 ?
I am having trouble with a CR15-08, I am using a factory new Kit chamber Stack and a new shaft seal but it seems to be the customer lost the shaft pin so I made one but I am having a bad noise when the pump starts.
Thank you!
very nice service vedio.
In pump we will gives greeting or oiling
Is this help in water leakage ????
do you have video of grounfos JD basic 5..my pump did not work
That is incorrect. This is the way to set the shaft height per Grundfos' work instructions. For more information, reference Grundfos product literature LCR-STK-152. Thanks for watching!
Çok. Kaliteli. Hidroforların. Mersedesi. Adeta
thanks for this inf....
Elvis sabe muito de grundfos
Thanks sir
My pump have pressure in running, have water flow and no leak in seal
But there is to much noise, its not in the motor also
You might have the pump shaft "stack" too high or not high enough. That gapping tool on the seal is what your suppose to be setting it at. Or your stack is going out is the other possibility.
Please need to buy some please
thanks
good
Muito útil.
Forgot “lockout” power source for the newbies
I want seal model number
como puedo bajar este video o videos de youtube
raju pall. hi
Very good 🎉😂❤❤❤❤NM😅😮😢🎉😂❤
Pump pressure not buildup
HUUE?
On The Goulds Pump you don't have to mess with the motor at all . Sooo much Better than Grundfos. We had a miura boiler with cre 8 pumps. No Loop system to keep pump running all the time . The stack bearings kept going out every few weeks . Or the Nut on the bottom of the shaft would come lose and the stack would drop and rub on the housing . I would never Recommend Miura Boilers or your Cre 7 8 or 10 Pumps on most feedwater systems. Junk and a pain in the ass . for the Maintenance and or Boiler Engineer . Hope fully you guy's upgraded your product .
Very good 🎉😂❤❤❤❤❤❤NMKL😮😢🎉😂❤