Instead of manually redrafting each profile for every node, you could draw a spline passing through each node and make the profile follow that spline. Saves you a lot of time and gets the whole process done in 5 mins!
Thank you for your kind words. The basic lesson is that "Never Quit". If there is something which I want to model or create, I never quit till I am successful in it.
Thanks for the feedback. I will definitely make a tutorial on cost and material estimation in the near future. As for the temple architecture, I don't have much information on that topic. You can send me images at letsrevit.tutorials@gmail.com about the architectural elements on which you want to have some tutorials.
I hope you will continue to train creative architecture, practical application step by step👍✔ And upload all what need tutorials ✔💙 #for_support_u I hope you will continue to train creative architecture , on ✔mega urban projects, practical application step by step👍✔ And upload all-what need tuto
After you make one Structural element and glass element, why cant you check the total segments around the shape, and array. so you don't need to do the draw line and create shape again and again.
I made the spiral shape, but I was not able to repeat it as you did. You cut off the important part of the educational clip. If you can explain to me even a simple thing about the process of repeating the shape, because every time I did the mirror, it failed.
Advice, dont bother redrawing. Simply make a thin line, draw the lines to be connected all the way down, make it solid and copy it via the rotate tool. After you are done, simply apply wall by face with the needed thickness
It might be possible that the 2D section which you have created on the reference plane is not placed correctly. That is quite a tricky part, make sure that the reference plane which you select is the right one.
I created a mass in Revit and then divided the surface, after that the voids I created are not cutting through the mass Can you please tell me how to undo the divided surface so that I could create a void in my mass.
Uncheck the U grid and V grid. After that open the surface representation dialogue box and in the surface tab check the original surface. That will bring back the mass surface.
Yes I do give online classes. Inform me if there is something specific that you want to learn about Revit, I could prepare a lecture for you. You can email me at letsrevit.tutorials@gmail.com
shortcut for that would be to creat adaptive family with adaptive points equal to how many points there is.. then array the family. Dynamo Script will be great too
This was way too helpful for me! Thank you
Thanks a lot
YOU ARE A GREAT TEACHER
JAZAKUMULLAH KHIREN
Instead of manually redrafting each profile for every node, you could draw a spline passing through each node and make the profile follow that spline.
Saves you a lot of time and gets the whole process done in 5 mins!
How ?
I respect your imaginative skills. How do you get to learn these things?
Thank you for your kind words. The basic lesson is that "Never Quit". If there is something which I want to model or create, I never quit till I am successful in it.
@@LetsRevit I honestly respect ✊ you. Thanks a lot
ME TOO I REALLY APPRICIATE YOUR WORK> AND THANKS A LOT .
Pretty impressive! But a lot of patience required :)
Please more videos like this 🙏🏽🙏🏽
Great Tutorial. You are the best
amazing tutorial hope u will make a tutorial on estimation
and i request u to plz make a video tutorial on temple design
Thanks for the feedback. I will definitely make a tutorial on cost and material estimation in the near future.
As for the temple architecture, I don't have much information on that topic. You can send me images at letsrevit.tutorials@gmail.com about the architectural elements on which you want to have some tutorials.
Sure I follow u on insta I will send u some imgaes on mail and insta too.. And thanks for ur kind response..
I can't pick the plane at x plane , if I pic plane it is appearing 9nly diagonal direction of rumboid line .. iam stuck in here..
Mashallah great work!
Thanks it is very helpful
very nice . love your job
good explanation.
Very Informative.... Shukran....
Great work keep it 👌
I hope you will continue to train creative architecture, practical application step by step👍✔ And upload all what need tutorials ✔💙 #for_support_u
I hope you will continue to train creative architecture , on ✔mega urban projects, practical application step by step👍✔ And upload all-what need tuto
What’s the name of this building?
very very good
After you make one Structural element and glass element, why cant you check the total segments around the shape, and array. so you don't need to do the draw line and create shape again and again.
Because they are not similar, array command is used for copying the same elements after a specific perimeter.
@@LetsRevit I think it is same element around the axis. So should work.
I made the spiral shape, but I was not able to repeat it as you did. You cut off the important part of the educational clip. If you can explain to me even a simple thing about the process of repeating the shape, because every time I did the mirror, it failed.
Advice, dont bother redrawing. Simply make a thin line, draw the lines to be connected all the way down, make it solid and copy it via the rotate tool. After you are done, simply apply wall by face with the needed thickness
Hello. can you make a tutorial about bamboo houses? then how do you add a door or window to the massing wall.?
Sure I will upload a tutorial on the bamboo houses.
@@LetsRevit thanks. And if you can all by adding a door or window to the massing wall
i am stuck in the middle process
my points are not selected after i set the plane at the point.
رائع إستمر
how to make a heart shape plan?
Great work, can you teach us how to create massing of calatravas world trade center. Thanks
Sure. Let me try and devise a process, if I am successful, I will definitely upload the tutorial.
Can u please help me I don't why but after selecting all the three and clicking it to create form it is showing error how to deal with that
It might be possible that the 2D section which you have created on the reference plane is not placed correctly. That is quite a tricky part, make sure that the reference plane which you select is the right one.
I created a mass in Revit and then divided the surface, after that the voids I created are not cutting through the mass
Can you please tell me how to undo the divided surface so that I could create a void in my mass.
Uncheck the U grid and V grid. After that open the surface representation dialogue box and in the surface tab check the original surface. That will bring back the mass surface.
Hi! I`m just wondering if you have online lessons. Ready to pay. I just want to improve my skills. Thanks.
Yes I do give online classes. Inform me if there is something specific that you want to learn about Revit, I could prepare a lecture for you. You can email me at letsrevit.tutorials@gmail.com
Is there any shortcut For doing this long 6:28
shortcut for that would be to creat adaptive family with adaptive points equal to how many points there is.. then array the family. Dynamo Script will be great too
❤
i have a Qus
NOT GOOD AT ALL, SORRY NOTHING PERSONAL BUT I GUESS YOU HAD IT WRONG, YOU PREFARED TO STAY SILENT INSTEAD OF INTERACT WITH THE AUDIANCE FOR GUIDENCE
Yes of course
You first learn teaching skills plz.this is not the way you teach so complicated.
Revit is so stupid 😂