236w on the package power on the AIO 360 rad and 208w on the Jiushark JF13K. That's genuinely not a bad showing, It's not every day a top down cooler can challenge a radiator in any capacity. Think this will be for my next build.
will this fit on matx board/ Asrock b450m hdv r4.0 ? And my case is tecware infinity m2. And can a 120mm fan still fit in the rear of my case? I want to get this because my mobos vrms does not have heatsinks and are naked and I want to cool my vrms directly. (edit: If this cooler can efficiently cool the vrms and reduce temp, and are there a difference in temperature of VRMS and RAM between this cooler and a mid tower cooler? If the difference is minimal I might just go for a mid tower.) Im getting this or a mid tower in the next few months after I get enough money since im upgrading few parts first before getting this
only thing I would note is that for boards with gpus in the top slot (your board has a m.2 in the top slot so there's no clearance issue here) you will want the heat pipes facing the gpu pcie slots, you installed it the other way here
That's the first thing I'm doing is upsizing the fans as well. Two Arctic Bionix 120mm fans specifically. This might be the king of downdraft coolers with better fans.
i was looking at the jf13k about a year ago before buying my peerless assassin to cool my 10850k but sadly there were no reviews at the time of the product
ye although I didn't watch any videos on this I figured it would have ro pwrform quite well considering size a and dual fan setup.. big fins ...so I just bought it to give it a go
I literally just got mine but was confused on how the back bracket faced. Thank you. So amd out. I have intel. But from what ive gathered, you've installed it unside down.
no mines intel... the back bracket should be flush with mobo... where the nuts go ..on the back side where back mounting plate goes ..it should the corners where the nuts go should be flush with the mobo.. cuz if it is not flush it will bend wen u tighten it
do u mean the writing is upside down on bracket ...it doesn't matter as long as it's on ..cuz its symmetrical doesn't matter ..so long as u have it on right it's all good 😊
@@MIKEYZVLOGZ sorry I wasn't specific. You mounted the back bracket correct but the whole cooler itself it's wrong way round. Pipes on the bottom not the top. If you need the wires to reach just turn them.
@DoctorFuzworth oh I see ..does that really matter tho? and are u sure cuz the thinner side should be where the ram goes so it clears the ram ..if u flip the cooler the thick side would be on the right where ur ram is ..it might not clear the ram
I'm not 100% sure my guy. Gamers nexus said pipes down and the picture on the instructions seem to be that way too. Whatever works but there's gotta be a reason they made it fins different size on each side how they did. Mobo compatibility maybe.
236w on the package power on the AIO 360 rad and 208w on the Jiushark JF13K. That's genuinely not a bad showing, It's not every day a top down cooler can challenge a radiator in any capacity. Think this will be for my next build.
ye it's pretty good
will this fit on matx board/ Asrock b450m hdv r4.0 ? And my case is tecware infinity m2.
And can a 120mm fan still fit in the rear of my case?
I want to get this because my mobos vrms does not have heatsinks and are naked and I want to cool my vrms directly.
(edit: If this cooler can efficiently cool the vrms and reduce temp, and are there a difference in temperature of VRMS and RAM between this cooler and a mid tower cooler? If the difference is minimal I might just go for a mid tower.)
Im getting this or a mid tower in the next few months after I get enough money since im upgrading few parts first before getting this
only thing I would note is that for boards with gpus in the top slot (your board has a m.2 in the top slot so there's no clearance issue here) you will want the heat pipes facing the gpu pcie slots, you installed it the other way here
yes correct ..good eye... I only noticed this after
@@MIKEYZVLOGZ all good, I saw a thread where it was mentioned, just wanted to note the reason just in case. Good video though for prospective buyers
@devontoner cheers buddy appreciate it very much... and thanks for the support means the world to me 🙏
Do you have any Noctua A12x25 or Phanteks T30 or better fans to swap it on? Would appreciate if you could thanks!
hi mate unfortunately i dont...
That's the first thing I'm doing is upsizing the fans as well. Two Arctic Bionix 120mm fans specifically. This might be the king of downdraft coolers with better fans.
i was looking at the jf13k about a year ago before buying my peerless assassin to cool my 10850k but sadly there were no reviews at the time of the product
ye although I didn't watch any videos on this I figured it would have ro pwrform quite well considering size a and dual fan setup.. big fins ...so I just bought it to give it a go
I literally just got mine but was confused on how the back bracket faced. Thank you. So amd out. I have intel. But from what ive gathered, you've installed it unside down.
no mines intel... the back bracket should be flush with mobo... where the nuts go ..on the back side where back mounting plate goes ..it should the corners where the nuts go should be flush with the mobo.. cuz if it is not flush it will bend wen u tighten it
do u mean the writing is upside down on bracket ...it doesn't matter as long as it's on ..cuz its symmetrical doesn't matter ..so long as u have it on right it's all good 😊
@@MIKEYZVLOGZ sorry I wasn't specific. You mounted the back bracket correct but the whole cooler itself it's wrong way round. Pipes on the bottom not the top. If you need the wires to reach just turn them.
@DoctorFuzworth oh I see ..does that really matter tho? and are u sure cuz the thinner side should be where the ram goes so it clears the ram ..if u flip the cooler the thick side would be on the right where ur ram is ..it might not clear the ram
I'm not 100% sure my guy. Gamers nexus said pipes down and the picture on the instructions seem to be that way too. Whatever works but there's gotta be a reason they made it fins different size on each side how they did. Mobo compatibility maybe.
Thanks for the video
You bet
I like the look 😊