we need people like you in our contry...you realy are a good technician.. waooo..very good job...i wish you move to n,y,c one day i will open a shop and have you like technician you can be technician teacher....jajajaja awsome work..
Master I have a question to be sure before that special operation. How you know in advance if the issue is the IC power or the EMMC? The rest components are discarded, not short in the VBAT
Hi Brother, I never replace the LCD, and I repared my samsung S3 (from At&t) by my self. I located the damage in the back of the LCD by pressing some components and the LCD, started to work. then I put warm air with a hot air gun of 1500 watts, I had modified the out of the warm air to concentrate the air in one point, i practice before with another board for count the time in seconds that i will go to need to apply, that was for only 3 second. I insulate the parts where don´t need hot air. The LCD and the cell phone still working for about six months and now I got the best result I had hoped.
hi AS salam alaikum ASFAQ bhai nice job kya aap iphone bhi repair karte hai agar karte hai to iphone ke baare me bhi kuch video upload kariye jaise ki dead iphone kaise repair karte hai aur kuch new model jaise samsungS4,NOTE2 ,NOTE3
hi what was the part that you changed?? what ic was that ?? whats that thing u used for remove is it called heat gun ?? and how did you get it resoulderd ?? what was the chemical you used to resoulder whats that called??
hey. What kind of red flux is that you are using? I have tried to get the chips off several boards and even with liquid flux i cant. too much heat ruins the board yet not enough pulls up the pads.
oye hermano soy de honduras y quisiera preguntarte cuanto de temperatura utilizas en el cautin para hacerle reballing a los puntos de soldadura de la placa ... eso que tu haces es genial
You're awesome and so is your technique, so clean, so perfect!! Please help, I have not seen any other channel respond to questions so hopefully you have one for me. I have mixed up the polarities on my S3 at the battery pins and it's quite obviously shorted out / fried some component. Can this problem be fixed by replacing a single component and if so can you please tell me which component it is I would need? Also what is that gel you used? Looks like very useful stuff!! Many thanks! =]]
Hey there, There is not any pain in my hands a S3, And nothing does not show Will I think you should change this part? Waiting for your assistance. thank you
It's possible power on the i9300 with power supply? I have put 4.1V to the + - but...The phone turn on and appares Samsung Galaxy Gt-i9300 and bootloops
Hi, please help me, I have after cleaning the motherboard i9300, pure alcohol, it has been oxidized, lower the microphone stopped working. Tell me what I need to BGA soldering. External microphone works. All phone functions are working, except for the bottom of the microphone.
Hey Ashfaq, what's PM stand for (pm ic)? This part is listed as an Overvoltage Protector, or Power Supervisor. Also, i see one of your other videos you've revived a dead S3 by replacing the EMMC, how did you know with which part the problem lies?
Hi Ashfaq, really well done, interesting video !! Can I ask that uses temperature, Wick and weld? Always the same? Thank you so much if you answer me, and again congratulations.
you got skill though! Ashfaq, how does one go about attempting to source these materials to do their own fix? and using this video as a tutorial of course
Boss QUestion : i have a samsung galaxy s4, sometimes turn on and freez at the first boot logo, if i take the phone and i press on it one hand from the left(on top) and the other from right(close to the mic) (like someone who want to break it) and i press power button, the phone work perfectly, if i release the phone it freez directly or start to go to green or white screen, i think its a video chip ? what do you think boss ?
I have a gt-9300 and it is completely dead. Will not charge or mount when plugged in to computer. The socket is fine as i am getting voltage through the battery charge pins. Coming across this video would this be the fix for it?
hi, i have note 2, phone wont charge or start. I have replaced with new samsung battery and new charging port. What can you test or diagnose the problem ? thank you
Please i have a question for you. I want to change the power chip on my samsung galaxy s3 and there is your video with explanation and steps, but you are using some materials to easily remove the chip and some material that cleans the dots of the motherboard to easily recognize. Can you please tell me what kind of material is that so i can buy it and install the chip. Thanks a lot brother Be safe Hamid Ajeti
Hi i have a s2 GT-9210 i use ODIN to put in new firmware because the reset factory with the buttons doesn´t show up on the menu...CAN YOU HELP ME PLEASE ?
hello i have 2 moto x 2014 one 16 and another 32 is posibly change the emmc??? the logic 32 water damage, but the phone still power on the problem are in sensors.. thanks
my HTC vivid doesnt start ...(dead) ..it freezed during charging and when i took out the battery and inserted it again to boot the boot menu appeared but again it failed and it doesnt start at all ... what do you think may have happened ? can you fix it ?
i have a lg g3 motherboard that burned out on me is there a way to fix ti? it got wet while charging so something was burned out? can you please help!!
That is the power supply chip controller right? MAX77686? what if the phone is able to turn on, but not charge? is this very same chip we need to replace? how much heat do you aply there? temperature and air speed? please answer :)
RUclips is not available in Pakistan, that's the reason uploader isn't able to read/reply to questions. the red thing is Soldering paste, it makes soldering to stick on its original position and not to smudge elsewhere.
heat depends but not more than 300 if you are not expert as you might burn the board or other ic and Ashfaq is based in pakistan so its really easy to get parts in pakistan but it depends where you live you can also buy online
can u recover my phone? I have lenovo a536 hardbricked , shows some Internal memory problem. but no os. I tried lots of s/w methods to recover my phone, In sp flash tool it shows error 4010.
It's just the power switch, just call Samsung and they will email you all the shipping information and shipping label for free and a new switch upgrade. If you do some searching on RUclips you will find that most phones have this problem no matter what brand. If its mechanical it will break no matter on your car in your house it doesn't matter guys if its mechanical it will break down eventually.
Your job would be so much easier if you bought a stationary board that holds the piece your working on still, it free's up your hand and allows for an unobstructed view.
we need people like you in our contry...you realy are a good technician.. waooo..very good job...i wish you move to n,y,c one day i will open a shop and have you like technician you can be technician teacher....jajajaja awsome work..
Ernesto I am from NY and I would love to learn this as well.
Master I have a question to be sure before that special operation. How you know in advance if the issue is the IC power or the EMMC? The rest components are discarded, not short in the VBAT
+Elias Abdel Good question, I wanna to know as well
check testpoints in service manual, if there is no proper voltage very likely the IC power is damaged
My S3 was charging and it got hot and turned off. I tried to put it back on but nothing works.
Would this help?
Hi Brother, I never replace the LCD, and I repared my samsung S3 (from At&t) by my self. I located the damage in the back of the LCD by pressing some components and the LCD, started to work. then I put warm air with a hot air gun of 1500 watts, I had modified the out of the warm air to concentrate the air in one point, i practice before with another board for count the time in seconds that i will go to need to apply, that was for only 3 second. I insulate the parts where don´t need hot air. The LCD and the cell phone still working for about six months and now I got the best result I had hoped.
Hi, great job. Can you tell me the name of flux and the temperature? Have a problem with my IC backlight on HOX.
Thank you
It's really a great job. Temperature concirn is obviously not so important as I thought. Thanks for sharing.
another professional repair .... thanks a lot Ashfaq. keep it up bro.
Plus very patient and steady this guy is very good to have, he will help yu make money and save money :-)
hi AS salam alaikum ASFAQ bhai
nice job
kya aap iphone bhi repair karte hai agar karte hai to iphone ke baare me bhi kuch video upload kariye
jaise ki dead iphone kaise repair karte hai
aur kuch new model jaise samsungS4,NOTE2 ,NOTE3
sir apna jo capasitor remove kya o dalnaka jorurat nehi.?
assalamualaikum bhai....u r brilliant...but please some video on diagnose....how do u diagnose the problem?????
i wonder why you allways connect the board to power supply after soldering and before you connect the battery.. can you explane pls?
I use to check whether it is short
pls my s3, No Power, No LED Charging, No Recovery and No Download Mode, is pm ic fault?
Hey.What is the liquid you are adding to unsolder this??
I have got a dead S3, does changing that chip fix it ? What are the different between this and the emmc ?
Credit where credit is due
Well researched - well practiced
You should make a good income for your skills
hi what was the part that you changed?? what ic was that ?? whats that thing u used for remove is it called heat gun ?? and how did you get it resoulderd ?? what was the chemical you used to resoulder whats that called??
Hello... i have a s3 mini 8200L that is dead by the main board... it is possible use an main board 8190 and just replace the entire board?
for that reason you connect two cables to the battery connector? thanks!
hey. What kind of red flux is that you are using? I have tried to get the chips off several boards and even with liquid flux i cant. too much heat ruins the board yet not enough pulls up the pads.
How come you're not using a braid to remove the solder underneath the chip?
Sir excellent and small doubt s3 mobile is not working speaker when calling
what temperature do you use to remove chips form main board ,in hot air gun?
Hello..that its for repair dead s3 for break??
What material and substance you used for this repair please?????
It's a kind of liquid flux, it's better than soldering paste. You can find it on Ebay.
que boquilla usas y cuanto temperatura tiene la maquina saludos
what is the red substance you drove out to the IC?
como se llama la parte que estas cambiando ?
oye hermano soy de honduras y quisiera preguntarte cuanto de temperatura utilizas en el cautin para hacerle reballing a los puntos de soldadura de la placa ... eso que tu haces es genial
helo..can i know what type flux you use? and it have to clean with acohol or not?
what is the temperature in the air flow you use?
You're awesome and so is your technique, so clean, so perfect!! Please help, I have not seen any other channel respond to questions so hopefully you have one for me. I have mixed up the polarities on my S3 at the battery pins and it's quite obviously shorted out / fried some component. Can this problem be fixed by replacing a single component and if so can you please tell me which component it is I would need? Also what is that gel you used? Looks like very useful stuff!! Many thanks! =]]
is the sprint s3 the same? where can i find the sprint s3 power management IC
what gel yo use? name ?..can you tell me..where power ic smsung tab 2 7.0
where do you get the replacement power ic from?
Hey there,
There is not any pain in my hands a S3,
And nothing does not show
Will I think you should change this part?
Waiting for your assistance.
thank you
What temperature do you have the SMD Rework?
WHAT IS THE NAME OF THE SOLDERING PASTE YOU USED?
It's possible power on the i9300 with power supply? I have put 4.1V to the + - but...The phone turn on and appares Samsung Galaxy Gt-i9300 and bootloops
+NikyRipy no man, you need to enter download mode and flash a new unrooted rom
+Redon Lacaj I have found the problem. I have set the powersupply to mA :P
Hello i need to know all the material and substance you have used for this repair please.
Many thanks.
Where you buy IC? From the market? Or online sites?
Please How much heat u use and where do u find ur parts?
Hi, please help me, I have after cleaning the motherboard i9300, pure alcohol, it has been oxidized, lower the microphone stopped working. Tell me what I need to BGA soldering. External microphone works. All phone functions are working, except for the bottom of the microphone.
I think you had damaged your mic so replace it first
hi, i think to give me your phone i can repair it !technician alimehydine :)
how much air and heat do you use?
good job. do you have solution for s3 having no audio and gets out of service area while making a call
Hey Ashfaq, what's PM stand for (pm ic)? This part is listed as an Overvoltage Protector, or Power Supervisor.
Also, i see one of your other videos you've revived a dead S3 by replacing the EMMC, how did you know with which part the problem lies?
PM stands for power management IC
good fine beautyfull ghant nice jabrdast work
Do you have a cell phone repair service?
It's possible power on the i9300 with power supply?
Its very clear now
Now l know how to fix my phone
hi, good video thanks for sharing, a few questions, what temperature do you heat in the station and how airflow?
RUclips is not available in Pakistan, that's the reason uploader isn't able to read/reply to questions.
350 degree
Georges Samaha Is that degree's C or Fahrenheit please?
This is nice work.. nice video too.. Can you please tell me what type of flux do you use? Thanks
Hi Ashfaq, really well done, interesting video !!
Can I ask that uses temperature, Wick and weld?
Always the same?
Thank you so much if you answer me, and again congratulations.
you got skill though! Ashfaq, how does one go about attempting to source these materials to do their own fix? and using this video as a tutorial of course
Boss QUestion : i have a samsung galaxy s4, sometimes turn on and freez at the first boot logo, if i take the phone and i press on it one hand from the left(on top) and the other from right(close to the mic) (like someone who want to break it) and i press power button, the phone work perfectly, if i release the phone it freez directly or start to go to green or white screen, i think its a video chip ? what do you think boss ?
I have a gt-9300 and it is completely dead. Will not charge or mount when plugged in to computer. The socket is fine as i am getting voltage through the battery charge pins. Coming across this video would this be the fix for it?
HI, what is the name of the paste using for remove oand solder the chip without damaging anything? thanks
Called flux
I have a galaxy s3 one day completely off and never boot again
think this method could help me?
hi, i have note 2, phone wont charge or start. I have replaced with new samsung battery and new charging port. What can you test or diagnose the problem ? thank you
buenas noches donde se consigue ese mmc para reparar la muerte subita en ECUADOR
It is not a component of the EMMC? right?
What's the name of this component?
Please i have a question for you. I want to change the power chip on my samsung galaxy s3 and there is your video with explanation and steps, but you are using some materials to easily remove the chip and some material that cleans the dots of the motherboard to easily recognize. Can you please tell me what kind of material is that so i can buy it and install the chip.
Thanks a lot brother
Be safe
Hamid Ajeti
Hi i have a s2 GT-9210 i use ODIN to put in new firmware because the reset factory with the buttons doesn´t show up on the menu...CAN YOU HELP ME PLEASE ?
hello i have 2 moto x 2014 one 16 and another 32 is posibly change the emmc??? the logic 32 water damage, but the phone still power on the problem are in sensors.. thanks
Please I want to know. How you get to know a IC is damage.
when i can buy the EMMC ?
my HTC vivid doesnt start ...(dead) ..it freezed during charging and when i took out the battery and inserted it again to boot the boot menu appeared but again it failed and it doesnt start at all ... what do you think may have happened ? can you fix it ?
i have a lg g3 motherboard that burned out on me is there a way to fix ti? it got wet while charging so something was burned out? can you please help!!
Is It you fixing MAX77686 or MAX77693 power ic?.Please tell me. need to know. Thanks.
That is the power supply chip controller right? MAX77686? what if the phone is able to turn on, but not charge? is this very same chip we need to replace? how much heat do you aply there? temperature and air speed? please answer :)
Hello friend, I have a samsung galaxy s (gt-i9000) with corrupt internal memory. that chips devo change?
whats name for the chip you are using
I have a problem on my Samsung s3 i can open my s3 because it is automatically tern off and automatically open again. How can i fix this?
What kind of flux?
Каким флюсом вы пользуетесь?
hi. i own a note 1 that screen keeps black. i have try with other screen so problema must be at the Mboard. what can i do?
Какой материал используется красный?
How much heat to remove power of sirq
Bhi apka shop keder hai ?
что вы используете клей его вниз
bhai ye ic bazar me milti hai kya
what's that thing you put? the red one... and what is that, the black thing...?
we use that red item for protect the black one which is a (smd) from burning
RUclips is not available in Pakistan, that's the reason uploader isn't able to read/reply to questions.
the red thing is Soldering paste, it makes soldering to stick on its original position and not to smudge elsewhere.
i fried my motherboard i try to repair mic of s3 and fried my entire chips of the motherboard is there a change i can fix this ?
Doesn't all that heat destroy the chip?
heat depends but not more than 300 if you are not expert as you might burn the board or other ic and Ashfaq is based in pakistan so its really easy to get parts in pakistan but it depends where you live you can also buy online
can u recover my phone?
I have lenovo a536 hardbricked , shows some Internal memory problem. but no os. I tried lots of s/w methods to recover my phone, In sp flash tool it shows error 4010.
helo..i have samsung tab 2 .gt-p3100.alredy dead..what that problem?can u tell me where power ic?
It's just the power switch, just call Samsung and they will email you all the shipping information and shipping label for free and a new switch upgrade. If you do some searching on RUclips you will find that most phones have this problem no matter what brand. If its mechanical it will break no matter on your car in your house it doesn't matter guys if its mechanical it will break down eventually.
Could u teach me how to fix sudden death syndrome s3
and one more question. Why feed the battery connector?
Sorry my English= Google translator.
Is that power ic
cual es el numero de parte de remplazo, gracias
Can i get the files from my dead phone?????
hi, fantastic man!!!! great work. what is the air flow temperature?
What chemical is that red jelly-like that is poured in the chip?
+King21 flux
temp setting please and flux name
как вы проверяете память
Your job would be so much easier if you bought a stationary board that holds the piece your working on still, it free's up your hand and allows for an unobstructed view.
Can you show how to know the ic is dead? Could explain power supply?
Temperatura usada es???
how much would you charge me to fix my phone if I send it to you?