Love the debadging of the tailgate. Did the same to mine a few weeks ago. Went full cycle on the process. Went from chrome to black. Then from black to delete and I’m happiest with delete. Just a cleaner look.
You really dialed this vid in super well. I liked the new 6.2 badges and side marker covers way more than I thought I would. Definitely worth a try to see how well they hold up after a bit of time. Appreciate the updates on the exhaust and the sliders.
Why do people freak out about brushes? Paint companies even say that brushes are fine to use. Rinse it off first but there’s zero evidence or proof that the dirt they retain scratches your paint. That’s why you rinse it off first. If you’re dumb enough to use a mud/pebble encrusted brush then that’s on you.
Nah, leaving it alone. That's a big cost that's just not worth it on this truck. A new sports car or something or a loaded paint matched diesel truck, probably will do it.
What did you use to remove the adhesive during the debadge? Have a link for that attachment for the drill? I took my emblems off and did the goo-gone but can’t get rid of it. Thank my man!
Thanks my man. Got it out with the wheel but now I have a million spider scratches from rubbing the goo gone for ever. Now gotta go to a shop to wet sand and polish it back to its glory.
I have a black Trailboss with the 6.2. I replaced the chrome siverado letters on the tailgate with matte black letters. I removed the LT badge on the tailgate and installed a 6.2 matte black badge on the tailgate where the LT badge went. I also replaced the 6.2 badges on the hood with matte black. I.think a 6.2 badge like the badges you replaced on your hood would look good on the left corner where your Silverado badge was. Just a thought.
@@matt13ross Your truck looks really good. I like it. I love the 6.2. Mine is a 2020 and I only have 5000 miles on it. It's never been driven in the rain or snow. Keep up the great videos pal and be safe.
Did a total badge delete on my Colorado. The worse logo was the bow tie on the tailgate. The fishing line trick didn’t work well for that. I guess too big of a logo.
Is it droning while in DFM mode? If so I see a lot of people having luck with the PULSAR LT FOR 2019-2022 GM 1500 it's a simple by pass plug in takes minutes to install and you can unplug it later for smog or warranty work, seems to do the ticket on that along with auto start stop
first thing i did on my zr2 was remove that awful chrome 6.2 badge and silverado too lol. Trying to find all black zr2 replacement badges but no one makes them yet... also went with the factory borla exhaust. No drone. Sounds insanely good.
i also did the rock sliders. Do you have tech pkg too? i feel like we have the exact same build. I'm removing my rock sliders though. Wish i never ordered them.
Are you having trouble selling the Colorado? Mines not for sale and I continuously get offers for 10-15k over what I paid, but I love it and I’m not selling it considering the dpf delete/tune kit is no longer available. Then again, HD Diesel 🇨🇦 is no longer around. I guess selling stolen tunes isn’t a great business model 🤷🏻♂️
@@Bpf1893 they were selling Ram delete tunes that were not theirs from an American tuner and he filed suit so they closed up shop. One website still sells the kit but they’re almost twice as expensive.
Matt: Great seeing another video with your gorgeous truck, I am excited watching you working on your truck.I like the 6.2L badging on the side of the hood scoops. I am so glad you are into your truck. When I was your age, 100ths of magazines were on the market. Now the only pickup truck mag. I find is STREET TRUCKS. It is alright but they push these low rider trucks. I know every one has their own taste but I do not get it. I want a truck to look like a truck. What do I know. Well KEEP ON TRUCKIN!!!You and your girl friend STAY WELL STAY SAFE! FRANKIE L.I.
That highway drone with my muffler delete is what caused me to change to a large Magnaflow. Sorry I don’t know thw model Number now but if I get it I will share. Still gives pretty good sound but is significantly better on the drone. I tried a magnaflow about the size of the Borla Atak but for me the highway drone was still too much. Love what your doing with you truck, giving me lots of ideas. Thanks!
Following. I have the Borla ATAK on my 2021 GMC Sierra AT4 (6.2L) with the flapper delete. The drone at highway speeds is noticable compared to the stock. I am looking for a little less drone, but keeping some of the around town growl
@@matt13ross -- When I watched your video, the straight pipe (muffler delete) you did sounds about 2x worse vs the Borla I have on mine. The Borla ATAK sounds excellent around town, butgets "noticable" and annoying at highway speeds. With the stock muffler...zero drone. Goal is to find a happy medium. Maybe the MagnaFlow as the other viewer stated?
@@matt13ross oh damn! Nm not an idiot. Just sold my lt for for 22.5. Crazy market right now. Waiting to see what the new Colorado actually looks like before I decide
Hey man when you bought the truck from the dealer did you have to wait for them to do a software update and inspection on the truck? If so how long did you have to wait before they gave it to you.
@@matt13ross oh I see. I bought one on thursday but they said it wont be ready until Wednesday due to the inspection. Just feels like a lifetime away lol. Thanks for the response.
1.) Always wash the wheels first 2.) Get yourself a pressure washer and foam cannon (it'll save your paint from massive swirls and scratches) 3.) Get some good microfiber drying towels. 4.) Enjoy your clean almost swirl free truck
I prefer the wheels last, as they are the dirtiest and will dirty the bucket the most. I have both, and I use it sometimes. Honestly I think foam cannons are a scam lol. I have some, but prefer my chamois. Trust me, my stuff is swirl free!
@@matt13ross It's all about lubrication. Take some pics at night with an LED light on the paint, I think you'd be surprised. But after all, she's a daily so enjoy it.
To bad they didn’t spell out Chevrolet on tailgate on the bottom would have looked good. I have a 2022 Sierra I’m going to be installing AFE Vulcan exhaust. I will let you know if you want
Love the debadging of the tailgate. Did the same to mine a few weeks ago. Went full cycle on the process. Went from chrome to black. Then from black to delete and I’m happiest with delete. Just a cleaner look.
Glad I skipped the black then, thanks lol
You really dialed this vid in super well. I liked the new 6.2 badges and side marker covers way more than I thought I would. Definitely worth a try to see how well they hold up after a bit of time. Appreciate the updates on the exhaust and the sliders.
Thanks for the support!
Lmao loved this video! That extra second you took to swat away the fly was gold lol
Glad you enjoyed!!
no hate but why are using a brush too wash the truck?
rip
Why do people freak out about brushes? Paint companies even say that brushes are fine to use. Rinse it off first but there’s zero evidence or proof that the dirt they retain scratches your paint. That’s why you rinse it off first. If you’re dumb enough to use a mud/pebble encrusted brush then that’s on you.
Every video I have to defend my brush lol. It's microfiber!!! Super soft!! No scratches!!!
Take the badges you removed, and make a sign for the garage, just a suggestion. Good video.👍🇨🇦
Thought about it, but threw them away lol.
You gonna wrap it in clear or paint protection?
Nah, leaving it alone. That's a big cost that's just not worth it on this truck. A new sports car or something or a loaded paint matched diesel truck, probably will do it.
The truck looks so great ❤️
Thank you!
Nice mods man; getting rid of those ambers looks a lot better! New 6.2L badge looks great too 👍🏻
Thank you! I agree
I like that my boy 👊.Ridiing from the OG s-10 zr2 to the Colorado to the Silverado.Nice👍
Yup, I've had them all lol. Beat the absolute sh!t out of my S10. Can't believe the thing still ran when I sold it.
@@matt13ross its a bow tie brother 💪
Ha, true story!
Did you lift or level it? Tire size? Wheel size/ offset?
Great videos
Glad you like them!
What did you use to remove the adhesive during the debadge? Have a link for that attachment for the drill? I took my emblems off and did the goo-gone but can’t get rid of it.
Thank my man!
This here sir! amzn.to/3zGpB9E
Thanks my man. Got it out with the wheel but now I have a million spider scratches from rubbing the goo gone for ever. Now gotta go to a shop to wet sand and polish it back to its glory.
They make a black ZR2 badge at least for the colorado that fits on the tailgate. Have it on mine. Not sure if it's the same dimensions.
Might be, might be smaller though.
I have a black Trailboss with the 6.2. I replaced the chrome siverado letters on the tailgate with matte black letters. I removed the LT badge on the tailgate and installed a 6.2 matte black badge on the tailgate where the LT badge went. I also replaced the 6.2 badges on the hood with matte black. I.think a 6.2 badge like the badges you replaced on your hood would look good on the left corner where your Silverado badge was. Just a thought.
Solid idea! Not sure I'm going to add any more badging, but possibly.
@@matt13ross Your truck looks really good. I like it. I love the 6.2. Mine is a 2020 and I only have 5000 miles on it. It's never been driven in the rain or snow. Keep up the great videos pal and be safe.
Thanks, will do!
I've got the Black/Red Z71 badges coming for my 22' Trail Boss 6.2l. Mine has the Dark Essentials package, so all the rest are blacked out.
The ZR2 should have come that way.
Did a total badge delete on my Colorado. The worse logo was the bow tie on the tailgate. The fishing line trick didn’t work well for that. I guess too big of a logo.
On my Colorado I had to heat the crap out of my bowtie to swap it out to black.
clean af
Thanks! That's the goal.
Is it droning while in DFM mode? If so I see a lot of people having luck with the PULSAR LT FOR 2019-2022 GM 1500 it's a simple by pass plug in takes minutes to install and you can unplug it later for smog or warranty work, seems to do the ticket on that along with auto start stop
It's hard to tell, but I'm pretty sure it drones while if DFM AND while not.
@@matt13ross gotcha, ordered my pipe from magnaflow hope it doesn't drone lmao
My 5.3 on the highway is the same straight piped like your truck and I agree it's very annoying at freeway speeds
Yup, gonna be changing that soon!
first thing i did on my zr2 was remove that awful chrome 6.2 badge and silverado too lol. Trying to find all black zr2 replacement badges but no one makes them yet... also went with the factory borla exhaust. No drone. Sounds insanely good.
i also did the rock sliders. Do you have tech pkg too? i feel like we have the exact same build. I'm removing my rock sliders though. Wish i never ordered them.
Yup, tech package was a MUST for me!
Are you having trouble selling the Colorado? Mines not for sale and I continuously get offers for 10-15k over what I paid, but I love it and I’m not selling it considering the dpf delete/tune kit is no longer available. Then again, HD Diesel 🇨🇦 is no longer around. I guess selling stolen tunes isn’t a great business model 🤷🏻♂️
Is that why they closed?
I'll have an update on the Colorado very soon! :)
BPF, maybe? I really don't know. I'm guessing a lot of those places are done with that sort of tuning.
@@Bpf1893 they were selling Ram delete tunes that were not theirs from an American tuner and he filed suit so they closed up shop. One website still sells the kit but they’re almost twice as expensive.
Matt: Great seeing another video with your gorgeous truck, I am excited watching you working on your truck.I like the 6.2L badging on the side of the hood scoops. I am so glad you are into your truck. When I was your age, 100ths of magazines were on the market. Now the only pickup truck mag. I find is STREET TRUCKS. It is alright but they push these low rider trucks. I know every one has their own taste but I do not get it. I want a truck to look like a truck. What do I know. Well KEEP ON TRUCKIN!!!You and your girl friend STAY WELL STAY SAFE! FRANKIE L.I.
Thanks Frank!
That highway drone with my muffler delete is what caused me to change to a large Magnaflow. Sorry I don’t know thw model Number now but if I get it I will share. Still gives pretty good sound but is significantly better on the drone. I tried a magnaflow about the size of the Borla Atak but for me the highway drone was still too much. Love what your doing with you truck, giving me lots of ideas. Thanks!
Thanks for the tip! I'm going to start looking into a few muffler options.
Following. I have the Borla ATAK on my 2021 GMC Sierra AT4 (6.2L) with the flapper delete. The drone at highway speeds is noticable compared to the stock. I am looking for a little less drone, but keeping some of the around town growl
That's exactly what I want.
@@matt13ross -- When I watched your video, the straight pipe (muffler delete) you did sounds about 2x worse vs the Borla I have on mine. The Borla ATAK sounds excellent around town, butgets "noticable" and annoying at highway speeds. With the stock muffler...zero drone. Goal is to find a happy medium. Maybe the MagnaFlow as the other viewer stated?
I wouldn't mind swapping it all out for a nice SS exhaust. But yea for now, I may find a simple Magnaflow or other muffler to swap in easily.
Wait did you sell the Colorado?!
Nm I’m an idiot
Yup traded for the Porsche!
@@matt13ross oh damn! Nm not an idiot. Just sold my lt for for 22.5. Crazy market right now. Waiting to see what the new Colorado actually looks like before I decide
New Colorado ZR2 might be my next truck!
I would look into a AFM/DFM delete option
When available for the 2022s I will!
The 6.2 badges are awesome..You should try Borla catback for a better sound bro!
Thanks! Borla is not worth the cost though. $1800 for that thing and it's only a cat back!!
@@matt13ross Best money spent on my Subaru STI and my truck was Wheels tires and Catback and i never regretted.
Can't argue with that.
Hey man when you bought the truck from the dealer did you have to wait for them to do a software update and inspection on the truck? If so how long did you have to wait before they gave it to you.
No updates they didn't do a PA inspection because it was out of state. I got it a few days after it came in.
@@matt13ross oh I see. I bought one on thursday but they said it wont be ready until Wednesday due to the inspection. Just feels like a lifetime away lol. Thanks for the response.
I have the same wheels on my Trailboss in Gunmetal.
Solid!
have you found anyway to increase mpg?
Yes. Sold it lol
@@matt13ross dude im not far from it. Maybe go with a tacoma lol
I run 87 in my 6.2 prem is recommended not required
That's what I read too.
1.) Always wash the wheels first
2.) Get yourself a pressure washer and foam cannon (it'll save your paint from massive swirls and scratches)
3.) Get some good microfiber drying towels.
4.) Enjoy your clean almost swirl free truck
I prefer the wheels last, as they are the dirtiest and will dirty the bucket the most.
I have both, and I use it sometimes. Honestly I think foam cannons are a scam lol.
I have some, but prefer my chamois.
Trust me, my stuff is swirl free!
@@matt13ross It's all about lubrication. Take some pics at night with an LED light on the paint, I think you'd be surprised. But after all, she's a daily so enjoy it.
Subtle Red is an excellent accent. My ZR2 Colorado is White with red accents
White with red is pretty solid!
why you have 2 pick up trucks?
Cuz Merica
@@matt13ross yeah but what use you have for them? just curious
I dig the red and Black decals . Definitely not a fan of the chrome . Keep the great mods and upgrades coming
Thanks, and will do!
Where’s the 14 wides
LOLOL
Remove the exhaust valve the drone is probably from it and the daynamic fuel management
Maybe the DFM, I think removing the exhaust valve may make it worse.
To bad they didn’t spell out Chevrolet on tailgate on the bottom would have looked good. I have a 2022 Sierra I’m going to be installing AFE Vulcan exhaust. I will let you know if you want
They do spell it out on models without the multi flex tailgate. I actually don't like it. Yea let me know what it sounds like!
Straight piping sucks get yourself a AWE exhaust system
When they make it for the ZR2, I'll look into it!
Kilmat sound deadening did in my straight piped ford raptor way better
Where all did you place the mat?
Whose Amber,,,????
LOLOL
I get my trailboss in australia next month can’t wait! Sensational videos! Where do you get the badges?
No 6.2 badging whatsoever!
Also not a bad idea.
You’re having so much drone due to that stupid DFM.
But I'm pretty sure it's drone when it's active and also when it isn't.
12.3 MPG Yikes 😬
It's NOT good.
They way you wash this, makes me cringe. Holy scratches
Wrong
India 🇳🇪