Royal Enfield Himalayan - Easy Oil Change

Поделиться
HTML-код
  • Опубликовано: 28 авг 2024
  • How hard is it to change the oil on a Royal Enfield Himalayan?
    Well, Jen found out.
    This was her first time changing the oil on her 2022 Royal Enfield Himalayan and it wasn't bad at all, as a matter of fact... it was quite easy!
    Nothing to this really, pretty much the same motions except the oil drain is on the side of the motor instead of underneath it.
    If we can do it, so can you!
    Btw, we aren't certified techs so this video shouldn't be viewed as a 'how to' video.
    Thanks For Watching!
    Like The Video(s)? Hit That Subscribe!! Really Helps The Channel!!!
    SUBSCRIBE RIGHT HERE: goo.gl/xnbQNb
    SUPPORT Precipice Of Grind HERE:
    / precipiceofgrind
    We now offer Guide Services, check out our website: www.precipiceofgrind.com
    DISCLAIMER: You are responsible for your own safety. Precipice Of Grind will not be held liable for injuries occurred while attempting the hikes, motorcycle rides,climbs, canyons, etc, that we feature in these videos.
    #precipiceofgrind
    Instagram: / precipiceofgrind
    Facebook: / precipiceofgrind

Комментарии • 16

  • @precipiceofgrind
    @precipiceofgrind  Год назад

    Like The Video(s)? Hit That SUBSCRIBE!! Really Helps The Channel!! Thanks For Watching!!!

  • @Wachuko-1
    @Wachuko-1 Год назад +1

    Excellent experience to do your own oil changes. Great job!
    Just a few comments/suggestions:
    - Submerge the new oil filter in oil before installing. You want it to be soaked. I have the same funnel you used. I just place it inside of that and pour oil inside the filter and around it until it is soaked. Then install.
    - Gasket for the oil filter cover is installed dry. Do not cover it with oil when installing.
    - I had the same concern with the copper washer supplied with the maintenance kit... It works fine. Do not reuse the old one as it will leak. Do not ask me how I know that 🤣.
    - I recommend replacing the stock oil drain plug with a magnetic unit. Helps with catching metal debris. Just for peace of mind.
    - I use Motul oil as well. But I went with the 7100 just because it is red and looks cool, lol. It meets all specs for the bike, so no issues there. And you know, oil is the blood of the engine... 😃
    - Amazed at how easy that mesh screen came off... mine fights me every single time!
    And a question: How are the tires holding up?? I changed mine to Shinko 705. I believe you have 804/805 on yours.

    • @precipiceofgrind
      @precipiceofgrind  Год назад +1

      Thanks for the suggestions, always learning! My tires have held up great so far. The smooth feel on the asphalt is still there and I have noticed that the back end does not kick out as bad as it did before around turns with the stock tires. I still do not feel like I have put them to the test enough though (no mud yet) to vouch for all situations. I also have not had to take them off the bike to replace a tube so not sure about that yet either.

  • @DnSAdventures
    @DnSAdventures Год назад +2

    Nice job! I think I am due for the valve check/adjustment here pretty soon, that one has me a bit nervous haha. Have a good one! - Shane

  • @confettihunterminus1
    @confettihunterminus1 Год назад +1

    Love y’all’s channel. Did my first change on my himi since I owned it. Also on the swing arm, after disassembling, cleaning, and lubing, I hammered in some 1 in. rubber chair feet to seal those holes.

  • @graymangw6016
    @graymangw6016 Год назад +1

    I got brake pads and chain coming up for my Himalayan. Good video.

  • @stephenx2857
    @stephenx2857 Год назад +1

    not to get into the weeds with oil. but most people in Himi groups recommend semi synthetic. not full. full synthetic has been known to cause clutch issues/clutch slipping. Aside from that... good video (would personally say removing the drain plug is fairly useless. just do the two small 8 milly bolts, take the plate off. ...but live and learn) ...the sight glass is all but worthless. scuttlebutt is the glass/casing was designed before the oil filter was added, so just follow the engine spec of ... aprox 1700-1800ml

  • @kevincraig8257
    @kevincraig8257 Год назад +1

    thats the oil I use in all my metric bikes 300 15/50 and my wifes Himalayan is getting due for her first service that little tutorial will come in handy just have the valve check also to do on the wifes bike thanks

  • @AT-py5dy
    @AT-py5dy Год назад +1

    Bravo! If you want it done right, do it yourself😊

  • @Mixologist-fc4sc
    @Mixologist-fc4sc 3 месяца назад

    Will Motul 5100 15W-50 be ok as well?

  • @insatiable_mind
    @insatiable_mind Год назад +1

    Have you heard about the Himalayan 450? 40 HP and 30Ft lbs of torque. Will you upgrade if the rumors are true?

    • @precipiceofgrind
      @precipiceofgrind  Год назад +1

      Sure have, just saw a pic of it. Supposedly it's the 450 Himmy that was spotted without being all covered up. If it was indeed the 450, it looked kinda like CB500X or along those lines. Can't say for sure if either of us would go for the 450, will have to wait and see.

    • @dc2090
      @dc2090 Год назад

      why would they go from a 411 to 450?
      I think a 650 twin option would be awesome or a 822 if they ever came out with a bigger twin, or maybe it would be a 700.

  • @tshadow6
    @tshadow6 Год назад

    Who puts Loctite on an oil drain plug? Don’t use that mechanic again.

    • @ShinyKnife
      @ShinyKnife Месяц назад

      I think it’s because the royal enfields are notorious for rattling bolts out. That’s why all the other bolts were so loose. It needs blue loctite on everything. Most of the older ones have zip ties holding them together. 😅