У вас технически грамотные приёмы работы( кроме разводного ключа). Хорошо бы было указывать величины моментов затяжки зезьбовых соединений. Вот тоько я не понял, вы только шлицевое соединение смазали? Спасибо.
Is this really necessary? It is normal sound, when rear wheel is lifted, but it's gone while on road and also while you turn it forward. It can only be heard lifted, rolling back. My mechanic say it's normal.
Knock fix fix is only re-lubricating? What if you find some worn-out rolls? Seems to me too easy. Especially using hammer for the bushes makes the vid and the repair so senseless...
the same thing happened with my car so for the solution the mecanic put some grease inside,the rumour had stopped but after a week it returned just the same
I had the same problem but I didn't have to take the pinion/bevel gear out. I lubed the splines with honda moly paste and that fixed it.
excellent video, congratulations! Brazil - São Paulo - Concours 2012/2013
You have to use a grease, with heat stability (like the Liquid Molybdenum) he used or it will just melt away again.
I don't think you need to remove the bevel drive from the gearbox as it is oil fed from the gearbox.. Good video.
GOOD JOB.
WOW. MUST HAVE GONE OFF ROAD TRIP TRIPPING.
Klepot pri otáčaní kolesom u mňa spôsobili "suché" kardanové kríže. Po premazaní každého bolo po probléme.
Did you just replace the bearing, just lubricate the joint, or both to fix the problem? Thank you.
all you have to do now is fix the flat spotin the rear rim ,good luck.
У вас технически грамотные приёмы работы( кроме разводного ключа). Хорошо бы было указывать величины моментов затяжки зезьбовых соединений. Вот тоько я не понял, вы только шлицевое соединение смазали? Спасибо.
Got the same issue on my gtr. .. It has only run for 10 000 kilometers. ... so grease is the trick! ! Does it last?
Is this really necessary? It is normal sound, when rear wheel is lifted, but it's gone while on road and also while you turn it forward. It can only be heard lifted, rolling back. My mechanic say it's normal.
@@zoranv12 but why have the sound if applying a little grease removes it? It's not a particularly difficult or time consuming job to do.
You made it look easy!
The quickness made me nervous. Seen many lost bolts before XD
Knock fix fix is only re-lubricating? What if you find some worn-out rolls? Seems to me too easy. Especially using hammer for the bushes makes the vid and the repair so senseless...
Why didn't you do a narration along with the video?
He is russian
Thx Man!
на сколько смазки этой хватит, на 2 дня?) зачем вы клиентов наё? тут редуктор менять надо
the same thing happened with my car so for the solution the mecanic put some grease inside,the rumour had stopped but after a week it returned just the same
how to repair the f1 error code ?
Так делать нельзя этот подшипник смазывается моторным маслом так и двигатель загубить можно.
I hope it helps me kill this noise tomorrow 😉👍
сделал так, спустя неделю звук вернулся.
Did you have to replace anything? Mine sounds the same.
потому что железо уже подошло, это полумера и не более и то, когда просто нечего делать каждый сезон набивать