That has to be the Best Looking MDF workbench build Ive seen yet, I absolutely love the integration of the sub enclosure and 6x9s built into the bench along with the electrical outlets as well, I am also loving those drawer handles with the rope and nuts, Excellent Craftsmanship Marek!!!
I can't imagine how much time went into this layout and design, but your next level skill and performance sure presented as having fun building it. Beyond impressive Sir, that is absolutely remarkable. I hope this bench helps increase your productivity and profits, you definitely deserve it!
Hi from Tauranga NZ. Mate Ive been obsessed with DIY workbenches for the past 3 to 4 years. I thought I'd seen literally every wood workbench that has been made until now. Your workbench in my opinion is the Holy grail of workbenches. You my friend have done dewalt proud. You're also the 1st person install a sound system in a workbench. This is exactly what ive been waiting to see. Well done awesome awesome awesome.
Best combination workbench I have seen so far. Love the integration of the sound system to keep the environment up lifting while you work. I am going to have to take some of your ideas and integrate them in my next workshop when we build the new house.
The finshed product is absolutely beautiful, stunning. My only thought not a critique at all but i wonder if the top could be done with a black teflon scratch resistent coat or even powdercoated.
Totally impressed with the look and quality of the build. I intend to build one exactly the same in my new workshop. One Question is could you tell me what the width and length of the workbench is, as i want to start to make a plan on sketch up.
Nice build. Next time use bare wire inside conduit. Not sure where you live but here that is against code and could cause issues. Having coated wires inside conduit can cause more heat and could be bad. COULD. DeWalt guys look out for each other's safety ;)
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice ruclips.net/user/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Hello. A very good job, my friend, congratulations on the idea and professional execution !!! Is it possible to get project plans from you? He plans to do something like that in his workshop.
Im Video kann man den Eimer mit der Aufschrift "Ekoban Lak" erkennen. Auf der Herstellerseite (www.detecha.cz/produkt/ekoban-lak/) steht folgendes: "Lack für Beton und saugfähige Untergründe. Durchdringt, verfestigt und versiegelt den lackierten Untergrund. Erhöht die mechanische Beständigkeit und schützt vor widrigen Witterungsbedingungen. Verbessert die Qualität und erleichtert die Reinigung. Verwendung Außen- und Inneneinsatz: Betonböden, Holz, Mauerwerk, Stein, Kunstsandstein und andere saugfähige Untergründe" Ein entsprechend ähnliches Produkt findet man sicher in jedem Land ;) ---------------------------------------------------------------------------------------------------------------- In the video you can see the bucket labelled "Ekoban Lak". The manufacturer's website (www.detecha.cz/produkt/ekoban-lak/) states the following: "Varnish for concrete and absorbent substrates. Penetrates, consolidates and seals the painted substrate. Increases mechanical resistance and protects against adverse weather conditions. Improves quality and facilitates cleaning. Use Exterior and interior use: concrete floors, wood, masonry, stone, artificial sandstone and other absorbent substrates". You can certainly find a correspondingly similar product in every country ;)
Do you have plans available. I have been looking for the right combination table saw/ router/ bench with an area for dog holes and this is the best I have ever seen..for me anyways. I would appreciate being able to build it myself
Ahoj, je to impozantní. Pokouším se nachytat inspiraci pro pracovní stůl s pilou a frézou, který se chystám stavět. Mohu vědět jen hrubé rozměry d-š-v. Před děkuji
Ciao è stupendo ed era da tanto tempo che avevo in mento un progetto del genere e tu lo hai realizzato.... un capolavoro!!!! Ma ti posso chiedere un pdf, le misure o qualsiasi cosa per provare a farlo anch’io ? Insomma ti prego aiutami!!😬😬😬😬
cześć muszę powiedzieć, że jest to najlepsze, jakie widziałem wokół gratulacje jesteś artystą, chciałem tego spróbować Chciałbym tylko uzyskać poradę na temat wymiarów podstawy, jeśli to możliwe, aby zorientować się w pozostałych środkach . W jakiej odległości od siebie są otwory na górze? jeszcze raz dziękuję .... mam nadzieję usłyszeć od ciebie :)
As a Dewalt junkie myself, I love this build. And if anyone claims "ultimate" status on their outfeed/assembly table, this is the first one I have seen with built in audio! I am just building out a new hobby shop and got my gallons of yellow and black paint a couple of weeks ago, so maybe we're brothers from different mothers. LOL Great work.
Love it! Perfectly done. How do you coloured the wood? Are all the yellow parts made by MDF as well? Hope you will show more of your Workshop in the future💪 _______ Wow, Stark gemacht! Wie hast du das Holz lackiert? Bzw womit? Sind die gelben Bretter auch lackiertes MDF? Ich hoffe du zeigst noch mehr aus deiner Werkstatt 💪
Tolles Ding was du da gebaut hast. Sieht echt mega aus und du hast da auch echt ein paar coole Ideen gehabt wie beispielsweise die Boxen. Hätte ich auch gerne. Vielleicht gibt es ja mal einen Bauplan zu kaufen. Viel Spaß und Freude mit der Werkbank und alles Gute. Liebe Grüße Chris
Excellent Job! I'm a Dewalt guy. Man, you should sell the plans, I'll buy it!
WELL DONE MAN! This is amazing! Great skills!
Yes, make the plans available
Maaaaan, now I have too start all over again on Sketchup on my bench.
That has to be the Best Looking MDF workbench build Ive seen yet, I absolutely love the integration of the sub enclosure and 6x9s built into the bench along with the electrical outlets as well, I am also loving those drawer handles with the rope and nuts, Excellent Craftsmanship Marek!!!
Hast Du einen Bauplan für das Teil? Ich werde meine Werkstatt demnächst umbauen
I can't imagine how much time went into this layout and design, but your next level skill and performance sure presented as having fun building it.
Beyond impressive Sir, that is absolutely remarkable.
I hope this bench helps increase your productivity and profits, you definitely deserve it!
Hi from Tauranga NZ. Mate Ive been obsessed with DIY workbenches for the past 3 to 4 years. I thought I'd seen literally every wood workbench that has been made until now. Your workbench in my opinion is the Holy grail of workbenches. You my friend have done dewalt proud. You're also the 1st person install a sound system in a workbench. This is exactly what ive been waiting to see. Well done awesome awesome awesome.
Moc pekna prace 👍..jeden z TOP workbenchu co jsem kdy videl 👍..klobouk dolu pane a at se dari 🎩
Best combination workbench I have seen so far. Love the integration of the sound system to keep the environment up lifting while you work. I am going to have to take some of your ideas and integrate them in my next workshop when we build the new house.
The finshed product is absolutely beautiful, stunning. My only thought not a critique at all but i wonder if the top could be done with a black teflon scratch resistent coat or even powdercoated.
This project is gorgeous.
Totally impressed with the look and quality of the build. I intend to build one exactly the same in my new workshop. One Question is could you tell me what the width and length of the workbench is, as i want to start to make a plan on sketch up.
Looks like a 10' by 6' or 9' by 5'
Nice build. Next time use bare wire inside conduit. Not sure where you live but here that is against code and could cause issues. Having coated wires inside conduit can cause more heat and could be bad. COULD. DeWalt guys look out for each other's safety ;)
Nice job, but I would say that your lack of PPE while paint spraying and routing is concerning, please look after your lungs
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice ruclips.net/user/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
That's inspiring. I wonder how much weighs...
Don’t move. Or sell it with the house.
Don’t move. Or sell it with the house.
WOW!!!!!!! What a amazing job you did! Probably the best bench I have seen to date!!!
I hope dewalt is giving you a heafty royalty for this project.. Nice work..!
Hello. A very good job, my friend, congratulations on the idea and professional execution !!! Is it possible to get project plans from you? He plans to do something like that in his workshop.
Awesome workbench! Great craftsmanship and attention to detail. Thanks for sharing the build.
Hi, what mdf and finish did you use? Nice work, thanks for sharing
Im Video kann man den Eimer mit der Aufschrift "Ekoban Lak" erkennen. Auf der Herstellerseite (www.detecha.cz/produkt/ekoban-lak/) steht folgendes:
"Lack für Beton und saugfähige Untergründe. Durchdringt, verfestigt und versiegelt den lackierten Untergrund. Erhöht die mechanische Beständigkeit und schützt vor widrigen Witterungsbedingungen. Verbessert die Qualität und erleichtert die Reinigung. Verwendung Außen- und Inneneinsatz: Betonböden, Holz, Mauerwerk, Stein, Kunstsandstein und andere saugfähige Untergründe"
Ein entsprechend ähnliches Produkt findet man sicher in jedem Land ;)
----------------------------------------------------------------------------------------------------------------
In the video you can see the bucket labelled "Ekoban Lak". The manufacturer's website (www.detecha.cz/produkt/ekoban-lak/) states the following:
"Varnish for concrete and absorbent substrates. Penetrates, consolidates and seals the painted substrate. Increases mechanical resistance and protects against adverse weather conditions. Improves quality and facilitates cleaning. Use Exterior and interior use: concrete floors, wood, masonry, stone, artificial sandstone and other absorbent substrates".
You can certainly find a correspondingly similar product in every country ;)
Didn't realize Chuck Liddell was a carpenter ....
What a good craftsman love the bench DeWALT should be proud
Nota 1000 muito bom mesmo.parabens um grande abraço Deus abençoe vc.
Do you have plans for this. Excellent build !!!👍
Do you have the plans
anybody know the table size.
Looks like 5x8 to me.
Do you have plans available. I have been looking for the right combination table saw/ router/ bench with an area for dog holes and this is the best I have ever seen..for me anyways. I would appreciate being able to build it myself
Unfortunately, I don't have any plans. I only had a vision and I implemented it during construction.🙂
definitely would buy the plans
Pretty awesome, but is that a built in dvd player? haha!
Sørgeligt at der ikke er tale og nogle mål man kan gå ud fra. Det er et minus ellers et godt arbejdes plads
Ohne Absaugung und immer schön den Staub direkt in die Lunge atmen.....
For dårlig at der ikke er tale samt mangler nogle mål 👎🏿Ellers en god video
Such a nice build!! We need plans!!! And you need some dust respirator!
Excellent work! Great workbench!
Exelente friend's
Didn't know Dewalt even makes clamps😂
perfect 👍👍👍
F A N T A S T I C
This guy really likes Ryobi.
BRAVO! Well done!
🤔😳👍
That thing isn't leaving that shop
Just wow 👏👏👏👏👏
What router plate and fence is that?
that's insane. great job. thanks for sharing
Ahoj, je to impozantní. Pokouším se nachytat inspiraci pro pracovní stůl s pilou a frézou, který se chystám stavět. Mohu vědět jen hrubé rozměry d-š-v. Před děkuji
Děkuji za komentář. Rozměr stolu je 270x170cm. Výšku jsem udělal 90cm abych se mic neohýbal a udělal jsem dobře, protože to k mé výšce opravdu sedí.
@@senzawood jasný já chci udělat vejšku 95. měřím 198 takže je to pro mě ideál .). díky skvělá práce.
perfect
Ciao è stupendo ed era da tanto tempo che avevo in mento un progetto del genere e tu lo hai realizzato.... un capolavoro!!!! Ma ti posso chiedere un pdf, le misure o qualsiasi cosa per provare a farlo anch’io ? Insomma ti prego aiutami!!😬😬😬😬
cześć muszę powiedzieć, że jest to najlepsze, jakie widziałem wokół gratulacje jesteś artystą, chciałem tego spróbować Chciałbym tylko uzyskać poradę na temat wymiarów podstawy, jeśli to możliwe, aby zorientować się w pozostałych środkach . W jakiej odległości od siebie są otwory na górze? jeszcze raz dziękuję .... mam nadzieję usłyszeć od ciebie :)
Amazing. What a great Workbench. LOVE IT
Outstanding workmanship! You have many fantastic features, now all you need to do is enjoy! Wonderful segment.
Great work there - like the handles and sound system.
As a Dewalt junkie myself, I love this build. And if anyone claims "ultimate" status on their outfeed/assembly table, this is the first one I have seen with built in audio! I am just building out a new hobby shop and got my gallons of yellow and black paint a couple of weeks ago, so maybe we're brothers from different mothers. LOL Great work.
Very impressive, well done!
Not a fan of big benches, but WOW! This bench is awesome and very well done. Great demonstration of skills. Thanks for sharing your build.
Fantastic job
Muy buena esa mesa de trabajo felicitaciones 👍👍👍👍👍desde🇺🇾👏👏👏👏👏
Man - that is brand commitment. I hope DeWalt sent this guy some serious swag after seeing this.
Any plans I would like to make this wow amazing 🤩
Fantastico!!!!!!
Next level
Outstanding. You have some amazing skills. Share plans when you are able.
Stunning
Very nice.... put some metal mesh screens over them speakers to keep projectiles out and show us some more functionality and use of this!
awesome work!
what product did you use to finish the mdf worktop?
thx for sharing
Well done! Nice integration of the router lift and fence. What did you harden/seal the MDF with?
One sweet multi-bench‼️ This one is my choice. I want to build it.
man !!!!!!! this is all i need wow! awesome man excellent job ! i need the plans. did Dewalt sponsor this ?
kongrats. very good work. greetings from vienna hug
Vera good Job. Lovely finish !
A black MDF top will looks very nice
amazing build quality aside.. how cool is the music too.
This is the most impressive and well thought out theme work table I have seen. How is the blue track beneath the router guide used?
I believe it’s the miter track but not sure why it’s placed where it is. A little offset. I don’t think he speaks English. Cool video though.
Love it! Perfectly done.
How do you coloured the wood? Are all the yellow parts made by MDF as well?
Hope you will show more of your Workshop in the future💪
_______
Wow, Stark gemacht!
Wie hast du das Holz lackiert? Bzw womit?
Sind die gelben Bretter auch lackiertes MDF?
Ich hoffe du zeigst noch mehr aus deiner Werkstatt 💪
piekna robota, serce rosnie, ze tez Polacy na RUclips robią międzynarodową robote:)
Wonderfull!!! Please!!! Size of bench!!!
Impresionante..una maravilla..desde Argentina Chaco.abrazo
Harika bir çalışma. Bu çalışma masasını tasarlamakta çok önemli. Tebrikler.
by far the best yet i have seen inspiring thanks for sharing
Maybe you are a DeWalt & Steelers fan ? Outstanding hideaway work station. Incredible craftsmanship.
Thank you for the comment
Tolles Ding was du da gebaut hast. Sieht echt mega aus und du hast da auch echt ein paar coole Ideen gehabt wie beispielsweise die Boxen. Hätte ich auch gerne. Vielleicht gibt es ja mal einen Bauplan zu kaufen. Viel Spaß und Freude mit der Werkbank und alles Gute. Liebe Grüße Chris
Saugeil 👍👍👍
Yellow Submarine
I would love to get my hands on the plans of this if you have them for sale! This is absolutely what i need and didnt even know it till i saw it.
מטורף.👏👏
That sir is a Masterpiece!
Super avoir le plan aurait été bien !!!!👍👍👍👍👍👍👏👏👏👏👏👏👏
Wow! Genius! 🤩😳
Yo quiero ese mesón de trabajo
Please use a mask especially dealing with MDF.
Really great work. Best Bench I have seen so far. Would like to copy it for my garage, too.
This is a masterpeice
Hi Marek,
I am amazed how great this workbench is. I would love to make it one for myself. Is there any chance you can share or sell plans for it?
Wow!! Great job!
Love the dog hole out feed table! Your miter station is impressive too!
Круто👍
Brillant man! Good job :D what kind of wooden board is that, how does it called?
Great work!!!!
Looks great 👍
Mega geil