Very informative video. Thank you. Running the exact same RAM/CPU as you but I used DRAM calculator (FAST Settings) to set it up for 3600 Mhz instead of 3200 MHz and get better performance still. I also run CPU at 3600 MHz @ 1.0V for max efficiency but get a steady hashrate of 13250 hs. Maybe worth a try.
Another good episode, thanks for the consistent effort and informative content. 15,000H/S pretty good, but it can be increased more than 10% if you do it with monero mining platform RagerX, is it possible for you to mine monero with RagerX and share results in your next video?
Thank you for the video I was searching for this mining tutorial . And only you have made it 🤷♂️but now I know why . it is not profitable 😑 we can breakeven even after a year so totally understand y people are not making tutorial on this
I looked it up with a mining calculator and that only nets me about $30 a month with just your equipment. That does not make me want to try out CPU mining. Is there any coin that I can CPU mine that earns you more?
so a 66% reduction in power draw of the CPU for a 20% reduction in hashrate when compared to the max OC. since you did these tests with 5.3.0 which gives the MSR performance boost I wonder if that made CPU clock speed more of a factor then it was before, because like I mentioned in your previous video I wasn't seeing much of a performance hit by locking the clock speed to the base clock.
thanks for info chief...I played a bit with BIOS/AMD Ryzen setting before I have found your video. I noticed there is little difference in speed between 3.8 and 4.1GHz...expcept too much enrgy wasted. I am going to try your underclocking.
I have an error in XMRig 6.8.1. I reads "connection reset by peer" no active pools, stop mining. Any idea whats the cause? First time miner using nicehash. Gpu mines fine, cpu gets these error every 1 min :/ 3900x 2080TI
5:35 you're using a CL16 ram and AMD software shows CAS Latency 15, next at 7:17 using a CL14 ram CAS Latency is 16, that's interesting.. also, you have "Coupled Memory: Yes" in the second ram module..
in the cause of windows, i got really good results with just using a light debian. no window-manager or something else, just a poor debian, with some non-free firmware. hugapages ofc ! but without all this window manager bullshit, the cpu had a lot more power for the calculation. every useless software interupts the cpu to mutch.
I get around 9800 to 10300 no idea why it hops around, i think there are stupid windows services interfering with the cpu performance. I have set mine to eco mode so i only use 75 watts. I use a different motherboard and ram. I dont know about these motherboards because they dont seem to show the same value as in windows. it doesnt make senses sometimes.
Please i need answer to this, can someone try out the ryzen 3900x on the cryptotab browser I want to know the hashrate it can give out and to know if its profitable mining with it, planing on purchasing it soon. pls I really need your help on this.
Judgin by my CPU similar settings ~70-73. Tbh the only times I sae 3900x get higher then 80 is in Prime95 test or really long rendering periods when the cpu is OC. But still peak I saw was 85
If the rig mining XMR and some GPUs mining ETH. How will it preform together. Will it loos ETH and XMR when run all same time. Did you try, any numbers ?
@@TheLifeofaMiner Thanks for your answer. I want to change the old motherboard w. I3 first gen. in my rig to a more efficient Ryzan. Then spend more money on the CPU and run XMR same time. Must be more economical long term I believe.
Sir, I am a beginner and mining with my laptop i5 7th gen Dell Inspiron 15 3576, Which has 2gb Radeon tm 520 I am using miner gaye which is not detecting graphic card
hi bro, i have a 2700, it worth upgrade the ram? it worth for you becouse its such a high end cpu but mine pulls like 5000h/s how much can i gain with c14 ram? you gain like 10 to 15% so for me would be like 400h/s more, but the ram it is so much more expensive, it worth that kind of upgrade? thats almost 3 month more of cpu work to paid the extra cost of the ram i thing, sorry my bad english
hmmm intresting I hawe TR 2950x 16/32 3.9Gh/oc Ram 32gb quad chanel enebled 3200Mhz with spec 14x14x14x34 max what I manage to pull is 9Kh is this ok or I can rize more if posible plz tell me how thx wery usful video
Dude.. Nobody is pointing their CPUs at Monero.. the botnets have fked the hashrate and diff.. get on luckpool and get yourself some Verus before the bitstreams get written to ruin the party.
I'm the absolute noob and I was curious so I just installed this thing and did nothing to my computer else than starting the program as admin and got 13180 H/S right out the bat !
15,000 Hash Rate will not even mine 1 Single Monero in 6 months. Be advised anyone watching this video. This is Pure Hobby and enthusiasm you cannot make money and mine Monero via Random X. Please know that before purchasing any computer parts
@@cryptoblock123 That being said, from the perspective of Hobby and enthusiast. 15,000 Hash Rate is very impressive. Job well done. and Supporting the network is cool too
Awesome video. Thank you! The only thing that distracted me was I kept wondering about the cost. I'm new to this.
4 года назад+3
I tried some fine tuning of my 3900x...awaiting for liquid cooling...so far optimal 13kh/s @ 120W I managed also 14khs but at 140w, which makes no since in profit department
I feel like I am missing something. This seems like a lot of work, for like $20 of profit every month (not factoring initial investment). Seems like pretty horrible economics. What am I missing?
If you're immediately converting mining rewards to fiat sure. For most mining activity involving altcoins (Monero is a bitmore mainstream than most but I still feel squarely in altcoin territory), the opportunity cost represents bullish outlook on the coin's future. Personally, I believe in the tech behind Monero having a reason to exist in the crypto space for years to come and that it's best years are still ahead. So for me, Mine and Hold is the way to go as its potential is worth more than its current exchangeable value.
Stumbled upon your video google to reddit. I like that you're guiding us through your process and thoughts. Currently trying to determine if and how to balance my computing needs with my new 3900x Build. I'd love your thoughts. My demands (in an economics sense of the word): Hackintosh daily driver. Windows for mining when not in use as Hackintosh -> And/ or, UnRAID machine where windows and Hackintosh are constantly running VM's where my windows would be scaled the largest so long as my Hackintosh got 1 graphics card and enough cores to be great. Kind of over zombie load and low cache compromises with my i5-8400 and 7700k machines. Hard to say what needs it's own rig, and what's ok to mix. Unraid can handle anything if your hardware can keep up. I'm curious to see how the mining performance will go though with sharing/ partitioning the ram.
I know you have a 2700. I manage to double my hashrate from 2300h/s to 4400h/s with my 2700 and that's due xmrig5.2.0 enabling 1gb large pages in linux sudo. I'm now glad I bought the 32gb 3200ghz/s ram. Would overclock the CPU but still using the stock cooler.. but those are the numbers at a safe 3600MHz/s for the CPU..
@@rubenechezabal6397 not too bad, my cpu cores are so stubborn, they need 1.5v! To do 4ghz, so I just cranked up the ram to make up for it, learn a thing or 2😉
@@sniperpronerfmods9811 i feel you right now i have it set to 1.35 v for a 39.75 clock ratio oc. anything higher than that it just isnt worth it for the heat and abuse on the cpu although i do have the nhd15.
Is it better to use CPU+GPU or CPU only using xmrig? I'm on Linux and with CPU+GPU I get ~9000+ for 60s H/s. My rig: Ryzen 7 3800X (stock clock, stock wraith cooler) RX 5700 XT (stock clocks) 32GB Trident Z Neo CL14 3600 MHz 1GB huge pages enabled, MSR module loaded, all green (no errors) on the xmrig console. MCLK/FCLK should be 1:1, as I set the XMP profile (3600 MHz) + FCLK clock to 1800 MHz. All works well so far. I can use the PC to a certain extent while mining.
4 года назад
Monero is not for GPU mining....well unless you like burning energy with no profit
Nice. You broke down the hash difference between all the optimization steps really well. I ended up with a similar hash on low voltage. Almost 12kh, I just set in my bios my CPU to be in super eco mode, 90 watts, with stock 3200 cl16 ram. Idk if the cl14 is worth cost.
Hey, great video. Hits all OC and tweaking for maximum XMR hashrate in one video. I'm currently using your 4325mhz clock and 1.35v core setting, but played around with some other timings. Was able to get it stable at 15.45K with the help of 3200 mhz CL14 ram, slightly lower timings, and a water pump for the cpu that's keeping the 3900x at 79C.
Good day! I managed to get a good hashrate off my 3900x @105watt draw (HWINFO readings). I mine on a full tower case along with 2 1080 Tis. If the 1080 Tis aren't mining, I get 65c max on my 3900x at low fan speeds, but when the 1080 Tis are mining I get around 75-80c. Would this still be good for 24/7 mining? How are your 3900x doing?
Many Many thanks bro for this amazing video, seriously I love it, the hashrate obtained is indeed a killer ! hard to believe what this CPU can deliver 👍🏻 Could U pls tell how much average Monero we can get per 24 hours @ 15.000 h/s ? 2 thumbs up bro, appreciate your time :) Sam 😎✌🏻
@@TheLifeofaMiner I have DDR4 16Gb CORSAIR VENGEANCELPX16GB (2x 8GB) DDR4 3600(PC4-28800), Ryzen 3900x, Asus rog Strix x570 motherboard. I start mining monero, it gives a maximum speed was 9,500 Klh. there were 12000+ hashes?What need to do?
you may consider that in 434 days the processor will be 100% profit, it pay´s itslef, for the other hand monero and btc will rise for sure, if you keep the cryptos that dolar per day can be much more...
@@sniperpronerfmods9811 Just some constructive criticism of your video: - Speak clearly and concisely. It's hard to understand when you're stumbling over words. There doesn't seem to be much "order" or "steps" to your video. - Use a tripod or screen capture. It's far too shaky. - It's a little out of date now. This was before XMR even forked. - Kill the music - 1.6V is way too much, even for Samsung B die. 1.45V should be enough. You even showed dram calc recommend 1.375 max for your ram. Again, Not trying to be mean, just making suggestions.
@@thebeebeescryptomining4422 oh really!!! Shoot... You should have told me 1.6v was too much for my ram that I have been running like that since 1st gen ryzen launched, man its probably gonna die tomorrow, thank god you came here to save the day to tell me this breaking news!! I'm playing with ya kid, you can either watch the video and learn or go screwoff, either way i am better at ram overclocking than you soooooo, gfys
@@sniperpronerfmods9811 Lol, really? You aren't going to get any subs trash talking like that. I was making suggestions, which you apparently took far too personally. Go back to playing with your nerf guns.
Amazing video mate, keep on the good work! So if i understand right, using the pc for minning with the "sweet spot settings" doesn't necessarily require to buy the extra CPU cooler. Right?
When I built my 3900x rig I foolishly chose the cheapest ram that would work, cause at the time I thought "RAM is RAM how much of a difference could it be". Lesson learned. I got 2x8GB crucial 3200 CL16. With DRAM fast settings and hours and hours of tinkering with every value, all I could muster up was barely 13KH/s :(
Haha me too! I spent hours trying to figure out why I couldn't get above 13Kh/s in the beginning. Finally tested different ram, should have just looked online lol.
Thanks for the info, what settings do you leave it at for 24/7 mining ? You don't push it at 80 degrees 24/7 do you? My cooler is the coolermaster dual 120mm EVO, I have a set of gskill 3200 16 cl ram and a MSI MPG 570 mobo with the 3900x... with the current cooler and stock settings anything over 14 threads pushes temp to 80 degrees... so I haven't even tried 24 threads yet, but was at 10-11 kh at 20 cores. will the machine thermal throttle over 80 degrees.
Bro, you will get more hashrate using ddr4 3900mhz. Set fclk 1:1 @1800mhz. And stock the cpu speed @3.8ghz with vcore 1.0150. I get 14.000 hashrate using msi x570 tomahawk with the same cpu. My ram timing is default xmp (18-22-22-42) 1.35v single rank corsair 3600mhz 8gb x2
Awesome video. Does the F4-3200C16D-16GTZRX will be an improvement over the RAM spec or it has to be the exact specified RAM that you showed in the video? Thank you in advance.
You can induce self resonance the same way with out the spark gap by placing a ferrite magnet on the core of your bifilar , sometimes you have to smack the magnet on the core to create the first vibration. But where is the free energy , show your readings.
This explanation and detail of what you did cut down in 12mins is just amazing! Thank you for that!!!
Very informative video. Thank you. Running the exact same RAM/CPU as you but I used DRAM calculator (FAST Settings) to set it up for 3600 Mhz instead of 3200 MHz and get better performance still. I also run CPU at 3600 MHz @ 1.0V for max efficiency but get a steady hashrate of 13250 hs. Maybe worth a try.
Thanks! Will try it out.
Thank you very much! your videos are very refreshing to see. 👍
Thank You for share this results !
Another good episode, thanks for the consistent effort and informative content. 15,000H/S pretty good, but it can be increased more than 10% if you do it with monero mining platform RagerX, is it possible for you to mine monero with RagerX and share results in your next video?
Thank you for the video I was searching for this mining tutorial . And only you have made it 🤷♂️but now I know why . it is not profitable 😑 we can breakeven even after a year so totally understand y people are not making tutorial on this
I looked it up with a mining calculator and that only nets me about $30 a month with just your equipment. That does not make me want to try out CPU mining. Is there any coin that I can CPU mine that earns you more?
good man ! you got there! i love the monero mining sub reddit chummity as well
That ROI is still over 1 year which does not worth it, not yet ! Well done video anyway.... happy christmass !
I been able to pull 15.5 KHS on my ryzen 9 3900X with G. SKILLS trident royal gold 3200 MHZ CL 14 Ram running at 71-72 degrees celsius
so a 66% reduction in power draw of the CPU for a 20% reduction in hashrate when compared to the max OC.
since you did these tests with 5.3.0 which gives the MSR performance boost I wonder if that made CPU clock speed more of a factor then it was before, because like I mentioned in your previous video I wasn't seeing much of a performance hit by locking the clock speed to the base clock.
Hello thank you ! There are differences of H/S, between 2 X 4 GB RAM CL14 and 2X 8 GB CL14 ?
thanks for info chief...I played a bit with BIOS/AMD Ryzen setting before I have found your video. I noticed there is little difference in speed between 3.8 and 4.1GHz...expcept too much enrgy wasted. I am going to try your underclocking.
How they hell does everyone have Trident Z royals?
like why would you spend that much on RAM!?
Hey bro, can you do similar video with the 3950x?
Don't own one. Sorry. Maybe in the future.
I have an error in XMRig 6.8.1. I reads "connection reset by peer" no active pools, stop mining.
Any idea whats the cause? First time miner using nicehash. Gpu mines fine, cpu gets these error every 1 min :/
3900x
2080TI
How many H/S does the Ryzen 3900X fetch in standard settings? Greetings from belgium.
nice!
Can you also list your parts that you use?
5:35 you're using a CL16 ram and AMD software shows CAS Latency 15, next at 7:17 using a CL14 ram CAS Latency is 16, that's interesting.. also, you have "Coupled Memory: Yes" in the second ram module..
Cheers for this video. Any reason why I'm getting 9423.0H/s on a Threadripper 2950X ?
Hi
I have question
Please guide me.
GPU RX radeon 580 MSI = 1mhash
What is your idea for use it?
Where as it uper than VEGA 64 OR GTX 1070
so how much is 15000Hashs per second in $USD???
at current prices less than $1.00 / day
Thanks
in the cause of windows, i got really good results with just using a light debian. no window-manager or something else, just a poor debian, with some non-free firmware. hugapages ofc ! but without all this window manager bullshit, the cpu had a lot more power for the calculation. every useless software interupts the cpu to mutch.
What is your hair problem?
Nice setup except for the mobo. Don't like the mobo with the fan on it at all!
Great video. Awesome hash rate. Would like to know the CPU temps?
I got you! Will work on it.
He don’t got you :(
My 3950x (without OC) only hashes at 15000...I must be doing something wrong... RAM is at 3733 CL 16 16 15 32
It’s a beast! Makes like 50cents a day lmao. ROI in 10 years. Pretty weak beast tbh
wait,really?? LMAO
ah thats like a Dollar a day or more before power bro.
@peppercar....... its 7 years too late for any kind of mining.... If you want the long term gain... just buy the coin and hodl
I get around 9800 to 10300 no idea why it hops around, i think there are stupid windows services interfering with the cpu performance.
I have set mine to eco mode so i only use 75 watts.
I use a different motherboard and ram.
I dont know about these motherboards because they dont seem to show the same value as in windows.
it doesnt make senses sometimes.
Please i need answer to this, can someone try out the ryzen 3900x on the cryptotab browser I want to know the hashrate it can give out and to know if its profitable mining with it, planing on purchasing it soon. pls I really need your help on this.
no hablo taka taka señor... nisiquiera lo voy a intentar
What so you reckon the hash rate would be for a i5 4th gen
Great video and content! :)
How many monero mine with 15000 h/s in a day
What kind of temps are you getting with that cooler?
Judgin by my CPU similar settings ~70-73.
Tbh the only times I sae 3900x get higher then 80 is in Prime95 test or really long rendering periods when the cpu is OC. But still peak I saw was 85
If the rig mining XMR and some GPUs mining ETH. How will it preform together.
Will it loos ETH and XMR when run all same time. Did you try, any numbers ?
Yes, you lose a tiny amount of hashrates for XMR when duel mining. I only lost like 50 H/s mining XMR.
@@TheLifeofaMiner
Thanks for your answer. I want to change the old motherboard w. I3 first gen. in my rig to a more efficient Ryzan. Then spend more money on the CPU and run XMR same time. Must be more economical long term I believe.
Sir, I am a beginner and mining with my laptop i5 7th gen Dell Inspiron 15 3576,
Which has 2gb Radeon tm 520 I am using miner gaye which is not detecting graphic card
I have 2 rams installed,
1200mh, 4gb and 8gb 2400mhz
I got hash rate of 500 to 800H/s
Is voltage VID or Vcore?
Did this mother play a big part in performance or will any mother board pretty much do the trick?
Yes, make sure you get a motherboard that can overclock.
The Life of a Miner ok thanks
hi bro, i have a 2700, it worth upgrade the ram? it worth for you becouse its such a high end cpu but mine pulls like 5000h/s how much can i gain with c14 ram? you gain like 10 to 15% so for me would be like 400h/s more, but the ram it is so much more expensive, it worth that kind of upgrade? thats almost 3 month more of cpu work to paid the extra cost of the ram i thing, sorry my bad english
It depends on your electricity cost, but a I hear you can get around 5600h/s with c14 ram. I personally think its not worth it for a 2700.
13k hashrate 130W 3.6 Mhz on cpu :D 3466 :D
Is 15kh/s the same as 15000h/s
Can you give links to the ram?
I can’t get my 3900x to go over 1600 h/s ):
hmmm intresting
I hawe TR 2950x 16/32 3.9Gh/oc
Ram 32gb quad chanel enebled
3200Mhz with spec 14x14x14x34
max what I manage to pull is 9Kh
is this ok or I can rize more if posible plz tell me how
thx wery usful video
That sounds like everything I would think of. You might be maxed out already. 9Kh seems correct looking at the other Threadrippers.
@@TheLifeofaMiner the most intresting part is if I use 32 threds it fall to 3/5 kh best solution was 18 threds 8/9 kh
@@bojantoprek7769 TR 2nd generation has less L3 cache than R9 3900x and thus cannnot achieve max hashrate at max threads.
@@sinistar9044 txs for explning this to me
Will you be doing a 3950X video soon?
I can't get my 3950x any higher then what the 3900x guys are hitting.
17 cents a day not really worth it is it lol.
Dude.. Nobody is pointing their CPUs at Monero.. the botnets have fked the hashrate and diff.. get on luckpool and get yourself some Verus before the bitstreams get written to ruin the party.
lol.. Youre a dumb fuck lol
What is ms mod?
something you don't have to worry about if you are on 5.3.0 or newer, it's automatic.
if cpu does a better job then we can stop using video cards.
gpu is not good for mining XMR, they are good for ETH
You really had this video drag on & on & on! Get to the point!
12,000H you just did not 15,000H stop click bait wasted 12 minutes of time.
Read the description dumbass
I'm the absolute noob and I was curious so I just installed this thing and did nothing to my computer else than starting the program as admin and got 13180 H/S right out the bat !
15,000 Hash Rate will not even mine 1 Single Monero in 6 months. Be advised anyone watching this video. This is Pure Hobby and enthusiasm you cannot make money and mine Monero via Random X. Please know that before purchasing any computer parts
YESSSSSS!!!!!!!!!!!!!!!!!
@@cryptoblock123 That being said, from the perspective of Hobby and enthusiast. 15,000 Hash Rate is very impressive. Job well done. and Supporting the network is cool too
@@francescoalbanese3974 im having 240MH/s how luckable can be that?
Awesome video. Thank you! The only thing that distracted me was I kept wondering about the cost. I'm new to this.
I tried some fine tuning of my 3900x...awaiting for liquid cooling...so far optimal 13kh/s @ 120W
I managed also 14khs but at 140w, which makes no since in profit department
I feel like I am missing something. This seems like a lot of work, for like $20 of profit every month (not factoring initial investment). Seems like pretty horrible economics. What am I missing?
would love to know as well.
If you're immediately converting mining rewards to fiat sure. For most mining activity involving altcoins (Monero is a bitmore mainstream than most but I still feel squarely in altcoin territory), the opportunity cost represents bullish outlook on the coin's future. Personally, I believe in the tech behind Monero having a reason to exist in the crypto space for years to come and that it's best years are still ahead. So for me, Mine and Hold is the way to go as its potential is worth more than its current exchangeable value.
15,000 h/s will get you about $31.50 a month. That really is not alot. It will take a WHILE to hit your ROI.
This is odd because I get 1.2 kh/s wih a Mac Laptop. I though with a miner I would get 12000 kh/s
Stumbled upon your video google to reddit. I like that you're guiding us through your process and thoughts.
Currently trying to determine if and how to balance my computing needs with my new 3900x Build. I'd love your thoughts.
My demands (in an economics sense of the word): Hackintosh daily driver. Windows for mining when not in use as Hackintosh -> And/ or, UnRAID machine where windows and Hackintosh are constantly running VM's where my windows would be scaled the largest so long as my Hackintosh got 1 graphics card and enough cores to be great.
Kind of over zombie load and low cache compromises with my i5-8400 and 7700k machines.
Hard to say what needs it's own rig, and what's ok to mix. Unraid can handle anything if your hardware can keep up.
I'm curious to see how the mining performance will go though with sharing/ partitioning the ram.
wow 1.27 per day ! HODLGANG
Ballin!!! damn nice result man awesome specs!
I know you have a 2700. I manage to double my hashrate from 2300h/s to 4400h/s with my 2700 and that's due xmrig5.2.0 enabling 1gb large pages in linux sudo. I'm now glad I bought the 32gb 3200ghz/s ram. Would overclock the CPU but still using the stock cooler.. but those are the numbers at a safe 3600MHz/s for the CPU..
@@anythingbutASIC bruh, hows your cpu so slow, my acient r7 1700 does 5820hs, i would cry if my 2700 was that slow
my 1700 is doing bout 5400hs right now. plus i find i get more hashrate with oc speed than ocing timings for ram
@@rubenechezabal6397 not too bad, my cpu cores are so stubborn, they need 1.5v! To do 4ghz, so I just cranked up the ram to make up for it, learn a thing or 2😉
@@sniperpronerfmods9811 i feel you right now i have it set to 1.35 v for a 39.75 clock ratio oc. anything higher than that it just isnt worth it for the heat and abuse on the cpu although i do have the nhd15.
Does the memory need to be fully inserted? How much frequency is better?
You actually couldn't push and the cooler doesn't matter.
Zen 2 isn't supposed to do more than 1.35v unless it's under its own boosting algorithms.
it's not worth it mine btc with gpu on nicehash and exchange it with xmr is mor profitable
Algorithm: CryptoNight Heavy-Haven test plz
Is it better to use CPU+GPU or CPU only using xmrig? I'm on Linux and with CPU+GPU I get ~9000+ for 60s H/s. My rig:
Ryzen 7 3800X (stock clock, stock wraith cooler)
RX 5700 XT (stock clocks)
32GB Trident Z Neo CL14 3600 MHz
1GB huge pages enabled, MSR module loaded, all green (no errors) on the xmrig console.
MCLK/FCLK should be 1:1, as I set the XMP profile (3600 MHz) + FCLK clock to 1800 MHz. All works well so far. I can use the PC to a certain extent while mining.
Monero is not for GPU mining....well unless you like burning energy with no profit
@ ahhh okay thanks
Rad! 15469.6 H/s, thanks dude really appreciate this 🙌
Hi, GREAT video!! Which Monero wallet do you use?
You can add a link of where to buy the ram or parts and get you affiliate bonus.
Nice. You broke down the hash difference between all the optimization steps really well.
I ended up with a similar hash on low voltage.
Almost 12kh, I just set in my bios my CPU to be in super eco mode, 90 watts, with stock 3200 cl16 ram. Idk if the cl14 is worth cost.
I got 17500 h/s in miner but the dashboard read only 800 h/s its confusing
Hey, great video. Hits all OC and tweaking for maximum XMR hashrate in one video. I'm currently using your 4325mhz clock and 1.35v core setting, but played around with some other timings. Was able to get it stable at 15.45K with the help of 3200 mhz CL14 ram, slightly lower timings, and a water pump for the cpu that's keeping the 3900x at 79C.
Thanks. Yea did some more tuning and got it up. If you copy the whole dclac fast settings, you will get the best results.
Why my disk alywas 100% using xmrig, any idea ?
Is a 3990x threadripper good at mining
Good day! I managed to get a good hashrate off my 3900x @105watt draw (HWINFO readings). I mine on a full tower case along with 2 1080 Tis. If the 1080 Tis aren't mining, I get 65c max on my 3900x at low fan speeds, but when the 1080 Tis are mining I get around 75-80c. Would this still be good for 24/7 mining? How are your 3900x doing?
Wish he would have shown the temps at each setting change.
How much money can a set up like that make every day?
Good video you make. Afraid I soon must spend money on a rig as yours. :) Look forward to your next video. :)
i still make money off my old rx 570
Many Many thanks bro for this amazing video, seriously I love it, the hashrate obtained is indeed a killer !
hard to believe what this CPU can deliver 👍🏻
Could U pls tell how much average Monero we can get per 24 hours @ 15.000 h/s ?
2 thumbs up bro, appreciate your time :)
Sam 😎✌🏻
I got you! Thanks Sam your always here with the support :).
@@TheLifeofaMiner
I have DDR4 16Gb CORSAIR VENGEANCELPX16GB (2x 8GB) DDR4 3600(PC4-28800), Ryzen 3900x, Asus rog Strix x570 motherboard. I start mining monero, it gives a maximum speed was 9,500 Klh. there were 12000+ hashes?What need to do?
3200 14-14-14 this is not overclock, casual top B-die xmp
overclock mean at least 3800 15-15-15
cpu mining is so 2009
Thx bro, youre good
i just did the math, its about a buck a day with a 434$ processor. at this point just sell the cpu and make more than you would in a year
Ouch!!!!!!
you may consider that in 434 days the processor will be 100% profit, it pay´s itslef, for the other hand monero and btc will rise for sure, if you keep the cryptos that dolar per day can be much more...
This is the best video out there about tuning for RandomX. Great content!
oh no its not, I guess you haven'y seen mine
@@sniperpronerfmods9811 Just some constructive criticism of your video:
- Speak clearly and concisely. It's hard to understand when you're stumbling over words. There doesn't seem to be much "order" or "steps" to your video.
- Use a tripod or screen capture. It's far too shaky.
- It's a little out of date now. This was before XMR even forked.
- Kill the music
- 1.6V is way too much, even for Samsung B die. 1.45V should be enough. You even showed dram calc recommend 1.375 max for your ram.
Again, Not trying to be mean, just making suggestions.
@@thebeebeescryptomining4422 oh really!!! Shoot... You should have told me 1.6v was too much for my ram that I have been running like that since 1st gen ryzen launched, man its probably gonna die tomorrow, thank god you came here to save the day to tell me this breaking news!!
I'm playing with ya kid, you can either watch the video and learn or go screwoff, either way i am better at ram overclocking than you soooooo, gfys
@@sniperpronerfmods9811 Lol, really? You aren't going to get any subs trash talking like that. I was making suggestions, which you apparently took far too personally. Go back to playing with your nerf guns.
good work
Amazing video mate, keep on the good work! So if i understand right, using the pc for minning with the "sweet spot settings" doesn't necessarily require to buy the extra CPU cooler. Right?
When I built my 3900x rig I foolishly chose the cheapest ram that would work, cause at the time I thought "RAM is RAM how much of a difference could it be". Lesson learned. I got 2x8GB crucial 3200 CL16. With DRAM fast settings and hours and hours of tinkering with every value, all I could muster up was barely 13KH/s :(
Haha me too! I spent hours trying to figure out why I couldn't get above 13Kh/s in the beginning. Finally tested different ram, should have just looked online lol.
Thanks for the info, what settings do you leave it at for 24/7 mining ? You don't push it at 80 degrees 24/7 do you? My cooler is the coolermaster dual 120mm EVO, I have a set of gskill 3200 16 cl ram and a MSI MPG 570 mobo with the 3900x... with the current cooler and stock settings anything over 14 threads pushes temp to 80 degrees... so I haven't even tried 24 threads yet, but was at 10-11 kh at 20 cores. will the machine thermal throttle over 80 degrees.
cool video can you please tell us how much $ are you getting a month with this set up ?
Bro, you will get more hashrate using ddr4 3900mhz. Set fclk 1:1 @1800mhz. And stock the cpu speed @3.8ghz with vcore 1.0150. I get 14.000 hashrate using msi x570 tomahawk with the same cpu. My ram timing is default xmp (18-22-22-42) 1.35v single rank corsair 3600mhz 8gb x2
Awesome video. Does the F4-3200C16D-16GTZRX will be an improvement over the RAM spec or it has to be the exact specified RAM that you showed in the video? Thank you in advance.
You can induce self resonance the same way with out the spark gap by placing a ferrite magnet on the core of your bifilar , sometimes you have to smack the magnet on the core to create the first vibration. But where is the free energy , show your readings.
Thank you! The videos you made are excellent. I achieved similar results following your suggestions!
amazing and excellent explanation, thank you miner 💥✔
So how is it doing? I see that bot-nets are all over randomx.
Very good video, how much power does a rig like this use in one day?
Great job! Thank you very much!