Rane One Case Modification Using The EZ Mod (Easiest Way To Modify Your Case)

Step by step instructions on the absolute easiest way to modify your Rane One flight case by using The EZ Mod system.
Your Shopping List
The EZ Mod: www.theezmod.com
Surge Protector: bit.ly/casemod...
Industrial 2" Velcro: bit.ly/2inchve...
Hosa XLR's: bit.ly/hosaxlr

[@NewVisionLCS]

Nice easy quick setup!

[@theezmod]

Would love a video testimonial from you!

[@SuperMksc]

Looks like you can still fit a yamaha mg06x side ways beside the power strip

[@MrKlashdis]

What are the 2 bits called left & right to attach the ears to (they’re screwed down) doesn’t look like it comes with essential pack as not in pic on website
Please advise. Thanks

[@theezmod]

Thanks for reaching out. I'm not 100% sure what you're talking about. Are you referring to the metal pieces that screw down to the ATA case and give a place for The EZ Mod and mic to attach to?

[@MrKlashdis]

@@theezmod yes

[@theezmod]

@@MrKlashdis those come with the odyssey case. This is a 1u rack space case that is designed for gear to be mounted under the controller itself. You can check them out here: www.odysseygear.com/product/fzgsraneonew1/rane-one-flight-case-with-1u-rack-space-and-glide-platform

[@djklasik504]

Do you have to use a drywall knife or can you just use a utility knife, also what's the length on your xlr

[@elitesoundskc]

Any sharp sturdy knife should work. My XLRs are 1.5ft I believe. You could use 3ft but you would have more excess to hide.

[@SuperMksc]

Which kit should I purchase if I’m using a phenyx pro ptu 1u receiver?

[@theezmod]

tried to find the specs on the receiver and can't find what I need.....give me the dimensions of the receiver or shoot me a link with this information and I'll see if it will be compatible. Thanks!

[@SuperMksc]

@@theezmod 4.5 cm x 21 cm

[@theezmod]

@@SuperMksc that receiver appears to be built like the Sennheiser Evolution receivers. The Sennheiser's are 212mm wide. I'm assuming that the screw holes on the sides of the receiver (where you attach the rack ears) are the same distance apart as the Sennheisers, but I would check that. This kit will come with 2 ears with screw holes 4 5/8" apart. I believe this kit will work: theeasymod.com/collections/the-easy-mod-collection/products/the-easy-mod-sennheiser-essentials-pack

[@donaldwilliams4740]

YOU HAVE TO BE KIDDING ME. !!!!!!!!!!!!!!!! HAVE YOU SEEN THE PRICES IN THIS SH-T. YOU CAN GO TO A STORE AND BUT THIS FOR CHEEP.

[@craigloftis]

Donald, post a link. Let’s see it at the store.