Land Rover Defender back door lock and barrel change (Music is a bit loud)

The back door lock on my defender stopped working so in this video i show you how to fit a new lock and transfer your original lock barrel over.
If you just want to see how i get the lock barrel out then jump to 3:30 in the video.

[@JJ01474]

That little nugget of knowledge of how to remove the barrel was really useful. Thank you

[@yorkstig]

Brilliant thank you. I had a similar problem and could work out how to take the lock barrel out of the old luck assembly

[@CEZAMPOL]

This video is interesting; however, it would be better if the camera was closer. Sometime ago, I had removed the lock rivets and replaced a small spring which was broken inside of it. So I've riveted again and it is working perfectly. It was not necessary to buy a brand new locker which is pretty expensive in Brazil.

[@TimReevesy]

Thanks, took a minute to find your video and a minute to do it! Perfect! Just a little feedback, the music is way louder than your voice, max volume just to hear you outside, then embarrassment when the loud music takes over.

[@Mids1970]

This was in my early days of video editing before i had worked out proper sound balancing, when i was just getting used to the SHOTCUT editing software. :)

[@kumanowatanabe1171]

I get it even when half the key was stuck in the lock cylinder about 15 years ago😀

[@adeshowell5386]

I was wondering how to remove the barrel. Very informative, thankyou.

[@larswinclair2352]

Very informative! Thanks.

[@deanh3741]

If it’s a case of the lock not staying locked it’s a small spring in the lock that needs replacing. Buy kit online fora few quid drill out a couple of rivets, swap spring. New rivets, job done

[@Mids1970]

The door kept opening while driving. I was originally going to open the lock and fix it inside but when I got it opened it was badly worn and a piece was broken off so I decided to fit all new.

[@boz6161]

Very informative as just about to fit new barrel.........now put some bloody oil on those hinges...🤣🤣🤣

[@Mids1970]

will do ;)

[@D_Nine_Tee]

How did you get the barrel out once you pushed the pin in? I can feel my pin pushing against the spring but the barrel is not loose and I can't pinch it out like you seemed to do in the video......

[@Mids1970]

If you push the pin too deep the tool you are using stops the barrel coming out. I just pulled on the key a bit and it popped out as you see in the video

[@D_Nine_Tee]

@@Mids1970 you were absolutely correct, thank you very much for replying!!

[@davidgill7199]

No, I've had a go and I just can't get the barrel out!

[@davidgill7199]

Sorted it...thanks for the tips and giving me confidence (y)

[@williamhthompson3502]

Hinges need oiling.

[@williamhthompson3502]

The only thing oil spoiled is a good suit!