I've tried all the codes, but this is the only code that worked. Thanks bro, if it still doesn't turn on, adjust the sensitivity, because that's what happened to me earlier, the LED kept turning on.
Hola !! comprè dos rh_nrf24 , lo puse con dos arduino uno, dice que llega a 1000 mts. .pero a mi no me llega a 50 mts. .apenas, el regulador es de 800 mAh, la fuente 3.3 2A , los datos viajan OK pero no màs de 50 mts. .a lo sumo, ya probè todas las combinaciones posibles en el soft (MAX MIN , 250 kbps etc. ) - còmo puedo amplificar la señal , que tenga màs potencia ? con un transistor ? còmo ?
How can I use this in a system that deters barking dogs? I currently have a system I wired together that runs high pitch piezo tweeter speakers on a remote but that doesn't work when I'm not home to activate it. The over the counter bark deterrents are useless. I need it to stay on for 30 seconds when it detects noise but no shut off when it detects the second bark. Any ideas?
I don't think this particular sensor will detect barking noises. It can only detect small noises very close to the sensor in my experience with it. I think you should research a bit about sound sensors that can detect loud noises in the environment like barking and maybe try that!
Just trying to help, but that usually means that either you don't have an Arduino connected or you have selected the wrong port. For me the code actually _didn't work..._ but for a different reason. Hope it helped... 👍
I've tried all the codes, but this is the only code that worked. Thanks bro, if it still doesn't turn on, adjust the sensitivity, because that's what happened to me earlier, the LED kept turning on.
Adjust the sensitivity until one of the LEDs on the sound sensor goes off, then try clapping.
I was able to put a bunch of LEDs together on a breadboard and created a music-vibing light scheme! Thanks for the code 👍
can you pls send me the code though?
how to use potentiometer it only reads when i blow in the sensor
In my case all the program has been uploaded but the two led in the sound sensor remain on even though I adjusted the potentiometer
Man ur videos are actually on next level
Thank you!
Thanks 👍. I was unable to figure out what's wrong then I realized that the problem is in adjusting the sensor. Thanks 👍
Is there a way to debug the sensor to see the value ita receiving so you can adjust variables accordingly in the code
How can i use different amplitued to a different out put can you tell me or show as please?
Hola !! comprè dos rh_nrf24 , lo puse con dos arduino uno, dice que llega a 1000 mts. .pero a mi no me llega a 50 mts. .apenas, el regulador es de 800 mAh, la fuente 3.3 2A , los datos viajan OK pero no màs de 50 mts. .a lo sumo,
ya probè todas las combinaciones posibles en el soft (MAX MIN , 250 kbps etc. ) - còmo puedo amplificar la señal , que tenga màs potencia ? con un transistor ? còmo ?
Can I connect a speaker to it to amplify the audible sound?
How can I use this in a system that deters barking dogs? I currently have a system I wired together that runs high pitch piezo tweeter speakers on a remote but that doesn't work when I'm not home to activate it. The over the counter bark deterrents are useless. I need it to stay on for 30 seconds when it detects noise but no shut off when it detects the second bark. Any ideas?
I don't think this particular sensor will detect barking noises. It can only detect small noises very close to the sensor in my experience with it. I think you should research a bit about sound sensors that can detect loud noises in the environment like barking and maybe try that!
would like to ask if the code still works? it's telling me that there's an error uploading the exit status 1
Just trying to help, but that usually means that either you don't have an Arduino connected or you have selected the wrong port. For me the code actually _didn't work..._ but for a different reason. Hope it helped... 👍
It is not working bro?
I tried it and it was not what I was expecting!
Wow!!
can i instead use arduino nano? if yes how?
arduino nano is the same as arduino nano but just smaller so yes it is possible with the same connections
Thank you man it is a great video
the code's not available anymore bro
Download the code bro
@@shayantabsir8747 i did the IDE just refuzes to open it
Led 1 and Led 2 on the sound sensor always shining
try adjusting the sensitivity of the sound sensor
the LED just stays on it doesn't go off when I clap
does anyone know how to use this with a breadboard???
is it possible to connect a sound senor to play a noise through a speaker?
Yes
@@aymaanra how
@@ianshepard5568 do you want to use the microphone to trigger the speaker?
@@aymaanra yes but i am a bit new to the electronics game and need some help like a tutorial or something
Hola! I can't open the drive
do anyone have the code? I cant seem to open it??
Nice one bro
Thank you!
I want to say thankyou
Ur project is working
I wish to know for AO thanks!
thank you so much
ty, it was very helpful :)
What coding app you have used
its called Arduino IDE
Bro it's not working
What's the issue you are facing? It might be that your sensor's sensitivity is not adjusted properly.
@@aymaanra yes thank's bro
Now it's working 👍👍
@@Bhavineebhat Cool! You're welcome! Glad I could help!
can you help me
What are some electronics/robotics projects you want to see on this channel in the future? Let me know by leaving a comment here!
super video
Thank you!
Hola! I can't open the drive