I have found a way for storage of wrenches in my workshop. From this point I have forgotten about long search of the necessary key, and also about a constant disorder in a box of tools.
Very nice, looks like those wrenches go way back. Here is a great tip for attaching wood to masonry. Drill a 3/16 hole with a masonry bit put a 3 or 4 inch piece of tie wire in hole and drive a 16d nail into your hole and or 2x4. Cheapest best hold ever.
Now thats what I call a good idea. Oh well done!!. Im gonna copy this , and even try to improve on it. ( thats a coat of clear vanish , so not really innovative but its all im gonna do) . Thanks for sharing. I was struggling for a simple idea that I could actually make without loads of power tools.
Did you find that amazing 10mm wrench? I’ve never been able to find any of mine and it doesn’t matter how many organizers I put up!! Nice video. To the point and no justification or rationale used as none is required.
That's gotta be one of the nicer ways to do it Slanted so ou can see the denomination. Would lay in a tool box nicely I like your older open-end wrenches. They all look like they are the same make bought all at the same time. I'm guessing Gramps took care of his tools
Love the design--any thoughts on making it of steel or aluminum square tube? Having magnets imbedded would hold the wrenches in place and allow it to stick onto a steel tool cart. It would be fairly simple to mark the notches and cut with a grinder.
I like your idea and of course I was thinking of using materials like sheet metal. I will apply this idea after I find another bunch of keys for the keeper)))
At least they are still in general condition, and they hold rather weighty keys in their hands, but with a conscious desire, many things can be broken))).
Sir this is not coming properly,do drill crossly or drill straight,,I don't have a table saw,I do have a jig saw but the 70degree cut does not match the end hole,can you tell me what mistake I am doing
Hi there, we would love to share your work on behalf of Tradesman Banter (Facebook) with full credit. Please let me know if you grant permission to share? All the best with your channel!
junaid tahir wt? only stupid ppl will mark with numbers a surface; you must be able to appreciate, compare and choose rapidly after guessing what size you need on any tool, it's been like that for decades and now you want to change that with a google brain? that is so unprofessional 😂
I was using woodprix instructions to make it and I did it already :)
Great idea. Great video, quick and to the point. No whining as to why you're doing what you are doing. Ya just did it. Excellent.
Very nice, looks like those wrenches go way back. Here is a great tip for attaching wood to masonry. Drill a 3/16 hole with a masonry bit put a 3 or 4 inch piece of tie wire in hole and drive a 16d nail into your hole and or 2x4. Cheapest best hold ever.
Straight forward and to the point! Those wrenches are hella old wow!!! 😲
Nice job. I’m going to copy this if you don’t mind.
Nothing will ever beat a tool roll imho
Now thats what I call a good idea. Oh well done!!. Im gonna copy this , and even try to improve on it. ( thats a coat of clear vanish , so not really innovative but its all im gonna do) . Thanks for sharing. I was struggling for a simple idea that I could actually make without loads of power tools.
My friend, you are beautiful work.. the keys is very old
Now your going to have to clean up those wrenches, what brand are they.
Those spanners need some tlc for certain!
Thanks! This is just what I need. I hate having them in drawers. Looks like a straight forward build.
Why the crappy music thought?
Someone needs new wrenches for Christmas--maybe a label maker too and you can label them
Hi
Coolio
shit noise in the back ground. what are you 12 years old
I’m 52 and loved the music!
Did you find that amazing 10mm wrench? I’ve never been able to find any of mine and it doesn’t matter how many organizers I put up!!
Nice video. To the point and no justification or rationale used as none is required.
I think it left town with my 10mm sockets.
@@burp1914 They're at the pawn shop, I pick them up by the handful. You should come see them sometime!
That is a great design. Would be cool to put on a french cleat so it would be portable to take outside or to the workbench.
Thanks videonya,
Wrench, wrench, wrench, screwdriver.
Awesome vid. Awesome idea. Thanks for sharing brother!
Wow so simple and yet so creative!
Abe Lincoln called, wants his wrench set back
Abe's Grampa gave him that wrench set too !
Nice idea and thanks for sharing it.
Good idea and practical. Thanks
Nice 👍👍👍👍👍👍👍👍👍👍
goood job
Felicitaciones por ése trabajo y compartir tus conocimientos un saludo desde Uruguay
PARABÉNS, gostei muito da sua competência e habilidade !!!
That's gotta be one of the nicer ways to do it Slanted so ou can see the denomination. Would lay in a tool box nicely I like your older open-end wrenches. They all look like they are the same make bought all at the same time. I'm guessing Gramps took care of his tools
Apparently I also have to keep these open-end keys, and pass them on by inheritance))
Cool Idea.
Show, fácil vou tentar fazer.
Love the design--any thoughts on making it of steel or aluminum square tube? Having magnets imbedded would hold the wrenches in place and allow it to stick onto a steel tool cart. It would be fairly simple to mark the notches and cut with a grinder.
I like your idea and of course I was thinking of using materials like sheet metal. I will apply this idea after I find another bunch of keys for the keeper)))
Looks like they might be a little fragile and break at the base with the grain
At least they are still in general condition, and they hold rather weighty keys in their hands, but with a conscious desire, many things can be broken))).
Must buy router and drill press now 🤣
you don't need to buy anything, you can do everything yourself))
What a nice wood shop .great job
Those wrenches belong in a museum
looks like art on that brick wall
Super!
Outstanding great and awesome
Great Idea just made this. - makes sense
naic
Very simple good idea, good implementation. But music is terrible!
i muted it. video did not require sound
Music kicked ass!
FREAKIN’ DITTO!!! :)
very nice the music
Ok good job👍👍👍👍👍👍👍💪💪💪💪
Muito bem balado gostei
My grandfather gave me some wrenches like those he said nuts and bolts use to be square, good idea
8
looks very good :) cant wait to see more from you!
what angle did you use ?
Sir this is not coming properly,do drill crossly or drill straight,,I don't have a table saw,I do have a jig saw but the 70degree cut does not match the end hole,can you tell me what mistake I am doing
Nice
What angle are the cut outs for the wrenches?
Any no more than 90)
What size drill bit did you use?
10mm
Perfect 👌
simple but fantastic... cool. thanks for idea
Yes, I like it. Good work.
Hi there, we would love to share your work on behalf of Tradesman Banter (Facebook) with full credit. Please let me know if you grant permission to share? All the best with your channel!
First I congratulate you for 100 000 subs. and I wanet to ask you how to start my own you tube chanel and be successful like you?
Amazing idea. Simple, and well thought out of the process
I seen few video of your really man you have skills so finishing in your work really no words for you one man army good luck
Отличное решение!
Excelente ideia...simples e funcional!!
Very good!!!
Szybko tanio poprostu super.
Why would people dislike the video?
Old useless wrenches, But nice art piece.
Maybe because it will fail after some time.
Yoru Hana how will it fail?
so nice
nice idea, but the way the grain runs it looks like some of these bits will snap.
They will. Did this while ago now i search for another idea.
Try using MDF or plywood. Stack to thickness.
cool organizer - get some nice an shiny tools :)
I have found the guy who buys open end wrenches!
😃😄😂😁 nice broo.like a stone
Simplesmente maravilhoso, parabéns 😊
very good idea and very nice the music
nice
Wow. That's great!
Show
that made my day
What angle did you mark with the protractor , and how much space between each hole
This is all individually, I was guided by sight based on the size of my keys)
@@mad_wheel what size drill bit
Do you use those wrenches?
of course
Классная тема! Молодец!
wrench numbers can also be labelled for ease of selection
junaid tahir wt? only stupid ppl will mark with numbers a surface; you must be able to appreciate, compare and choose rapidly after guessing what size you need on any tool, it's been like that for decades and now you want to change that with a google brain? that is so unprofessional 😂
Show de bola
Those tabs broke in a week
Very cool!
chicks dig it.
He
Cool video. thx
wooow nice
Awesome!!!v Add labels.
Good 👌👌👌👌👌
You went with the grain it will break very easy should have turned it 90 degrees and went against the grain.
Despite all this, it serves me to this day and nothing has broken)
@@mad_wheel this could be made from pvc cut in half of metal tubing cut in half also.
I have that sane router table and it’s just as covered and stained lol
Cartera de tortuga
Thanks for idea
Good idea
Thanks for the idea it selfs me for organizing my wrech
Fabulous idea, T Y
Brilliant
I like that
Music made me leave quickly !!
👍👍👍
Nice
Cool n simple