Eficiente y practico!!!♡ Apenas lo vi y lo ame!!! Empezare a buscar quien lo haga para mi o tal vez hasta podria intentarlo.:)).. agradezco por compartir esta buena idea!! en mi busqueda, este hasta ahora ha sido el mejor tutorial y sencillo para entender, gracias gracias!!!
loved it. what would also help is giving the names of each material part (hinges, type of wood pieces called, what type/size screws) and what type of tools used. for a newbie handyman would help a lot to know what to ask for @ home depot for instance when buying parts :)
I randomly chose these ones, it went out quite nice Three "legs": 140, 140, ~130 sm Moving part: 60 sm Other parts: 20 (upper one), 70 (vertical one), 40 sm
Well I can tell you I am a carpenter, it’s because he ofcourse, leaves it up to the builder to decide their own height measurements etc. Relax, don’t overthink it, trust me! ;)
its a great project but, can you help me with the measurements? in the video they are not seen completely, the video is cut off and it does not allow all the measurements to be seen well. Hope and heard from you hope and read from you soon
Simple and well done, unfortunately, in my country, building one is as expensive as buying a premade : it's like a 5bucks difference but when you count in the time of work it basically ends up costing the same
Great project!! 1000x cheaper to build than to buy and it looks like it was made from a manufacture shop! Two large thumbs up!! But what I'd like to know is... How do you keep that "slider bar" from falling down if you have something sitting on it? Perhaps, by drilling 1/4" holes through the 1x1 upright it slides up and down on, you could insert a small piece of dowel or a peg to keep the bar from falling or sliding down? I dunno!
Well, if it doesn't stay by friction, you can insert a screw on the back of the slider so you can lock it in place. A less invasive way may be to insert something thin between the sliding parts. Hope it helps
First impression a minute into the video: This guy works like I do ... precariously holding a board in one hand and an electric saw in the other ... In the kitchen (or any other family-type room) .... As long as you're on the floor. THAT is the main thing. Five bucks says his wife has given him a corner in her exercise room where he’s allowed to keep tools. 90% of the job is putting shelves up. (edit) Hey! It ended up being a pretty good video. Final thoughts? Yes. WTF is with the half-raped child’s doll on the shelf upper left frame at around 4:00 ?!
![[Model B] How to assemble an 5ft easel | Painting Stand | Assemble with me | Grandink ®](http://i.ytimg.com/vi/DuC31_kARCI/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Eficiente y practico!!!♡ Apenas lo vi y lo ame!!! Empezare a buscar quien lo haga para mi o tal vez hasta podria intentarlo.:)).. agradezco por compartir esta buena idea!! en mi busqueda, este hasta ahora ha sido el mejor tutorial y sencillo para entender, gracias gracias!!!
Best most simple version out there. Thank you
instablaster...
What a brilliant, simple and efficient design. Simpler than the one I just bought for £26 from Amazon and assembled myself.
your video has been very very helpful thank you
loved it. what would also help is giving the names of each material part (hinges, type of wood pieces called, what type/size screws) and what type of tools used.
for a newbie handyman would help a lot to know what to ask for @ home depot for instance when buying parts :)
Just what I was looking for, simple and practical. thanks so much.
Love your creative thinking of making it slide up and down for height adjustments, not stupid at all. Great job!
Congratulaciones !!!excelente trabajo !!!
So nice and easy.... Thanks for sharing!!
ایکدم آسان طریقہ...
Perfect easy idea... Thanks
Parabéns!!! Simples e objetivo.
Beautiful work 👌
absolutely brilliant! how much did it cost you then and what do you think it would today, 2022?
Thank you! At that time it cost about 3 dolars. Nowit would be around 5 or 6, due to the increasing price of wood
Thanks! This will be a perfect weekend- project for me and my son, we are planning to do a Bob Ross paint-a-long 😁
That's very nice. Happy i could help
@@CraftsAndProjects its a great project jut, can you help me with the measurements?
hope and read from you soon
Mh top tema💪👆🔥
Perfect project for the coronavirus lockdown
so much cheaper than store bought!
Thank you for Sharing 🤗
Happy i could help. Stay safe!
Thank you 😊😊😊😊...I completed today❤❤
Muy bien amigo, le haré uno a mi beba... Gracias por el apoyo...
Muchas Gracias amigo por aportarnos tus conocimientos.
tendras las medias bro
@@samuelg.rosales202 por favor, las medidas!!
Excellent work. I love this easel.
Enjoyed your video. Excellent idea by placing a slider to hold the canvas.
EXELENTE TRABAJO Y MUY FACIL HACERLO....GRACIAS GENIO...
Thanks for video👏👏👏
simply brilliant!!
👍👏👏👏amazing, I like it😍
Simple method. Just made one today. 👍👍
Glad i could help
By far my favorite and easiest 👍
MIne turn out really nice! Thank you!
Happy to hear that!
I want @@CraftsAndProjects
Help full vdo thank you so much
Super 👌❤️❤️
Wow this is great, it helps me, i will make for my son
Hi new friend here
Good job
Muchas gracias ,, me has dado una buena idea.
ME ENCANTÓ!!!!!
Great
Very nice and great job
Hfbcbbgnsgrbhf .DF dbegdbhfvdgbdgdvhdbdhdngdhdbvrvdo
Gracias quedo lindo y facil de hacer
Thank u, very detailed and easy to make watching your video. 😉
Happy to help!
Muito bom. Valeu a inspiração tchê. Miro de Souza da cidade de Portão-Rio Grande do Sul- Brasil
Carai, tchê! Morei em Portão no bairro São Luís por uns 5 anos com minha gaúcha! Trabalhei na Hoff do areião em S.S do Caí.
@@josuecal Que maravilha. Portão está aberto.
I will make it..thanks.
Parabéns.. e 👍like 👍like
Excelente, todo lo haces fácil y sencillo.
It would be really helpful if you put in description box how long exactly is each part.
I randomly chose these ones, it went out quite nice
Three "legs": 140, 140, ~130 sm
Moving part: 60 sm
Other parts: 20 (upper one), 70 (vertical one), 40 sm
it will help me.thanks.
Well I can tell you I am a carpenter, it’s because he ofcourse, leaves it up to the builder to decide their own height measurements etc. Relax, don’t overthink it, trust me! ;)
Can u tell what measurement u take in thise
What do you call that metal ,the one you pull up and down for the adjustment?
Sencillo y rápido.., ¡¡ excelente...!!!
Very nice, thankyou for sharing this vedeo
Awesome I'm sure going to make it now
Very Good!!
Thank you this helped a lot!!!
thanks mate, u r a genius
Surely not a genius, but happy to help!
its a great project but, can you help me with the measurements?
in the video they are not seen completely, the video is cut off and it does not allow all the measurements to be seen well.
Hope and heard from you
hope and read from you soon
grazie per il video, semplice, veloce, ma nello stesso tempo ...... meraviglioso
Super
Thank you!!! The best.
You didn't mention the size of the sticks, we want the sizes of each of them.
Hello there! At 0:33 you can see the dimensions i used, but you can modify them for your needs. Have a nice day
Parabéns ótimo vidio
Could you tell me the measurements you used
Simple and well done, unfortunately, in my country, building one is as expensive as buying a premade : it's like a 5bucks difference but when you count in the time of work it basically ends up costing the same
Bravo ! 👏
Thanks so much easy and to the point
Bravo
amazing bravooooo
Me encantó, me perdí en como se hace el artilugio para mover la altura, gracias
I like the pinewood color.
bravo c super
Ma afpaka super ho
Merci, dommage qu'on a pas les matériaux détaillé au début
Latte de bois, colle et visserie aha
Excelente!!!!!!
Disco 💽 de Rei Charles 👍🇧🇷 4:47
Great project!! 1000x cheaper to build than to buy and it looks like it was made from a manufacture shop! Two large thumbs up!! But what I'd like to know is... How do you keep that "slider bar" from falling down if you have something sitting on it? Perhaps, by drilling 1/4" holes through the 1x1 upright it slides up and down on, you could insert a small piece of dowel or a peg to keep the bar from falling or sliding down? I dunno!
How do you stop the weight of the picture pushing the crossbar down?
It stays by friction and/or torsion. I tried to keep it very low cost, but you can use a screw on the back to secure it
Bom dia! Quais são as medidas das madeiras pra confecção deste cavalete???
4 x 2 cm
Vip🎉
Quá đẹp.
Thank u so much 💜💜💜
Bonjour très beau. Possible d'avoir le plan détaillé des mesures de tous les tasseaux pour faire le chevalet merci
What's the black liquid u applied?
Water based black paint...Im guessing the video said if you paint in house use a water based paint...😀😀hope that helps!!
What are material required for making this woodworking project
It looks like 1by 2, which means it is o.5x1.5” actually in Canada wood shop
Im struggling with the slide. How do I get it stable? It keeps sliding down
Well, if it doesn't stay by friction, you can insert a screw on the back of the slider so you can lock it in place. A less invasive way may be to insert something thin between the sliding parts. Hope it helps
Btw name this also as how it's in the english dictionary as: easel . Will help with s.e.o and video views
What's price
👍🙏
🙂👍
how big is the canvas at the end?
First impression a minute into the video:
This guy works like I do ... precariously holding a board in one hand and an electric saw in the other ...
In the kitchen (or any other family-type room) ....
As long as you're on the floor. THAT is the main thing.
Five bucks says his wife has given him a corner in her exercise room where he’s allowed to keep tools.
90% of the job is putting shelves up.
(edit) Hey! It ended up being a pretty good video.
Final thoughts? Yes. WTF is with the half-raped child’s doll on the shelf upper left frame at around 4:00 ?!
Its a action figure idiot-
@@tealisbored Well it's (with an apostrophe) an (with an n) ugly one, Professor.
And you sound angry. is it yours?
❤️❤️
Mii de 👍🏽
wow so helpful and easy
O de trás é quantos metros
Me sirve.Gracias.
It is possible to have the exact dimensions please
Hi Anne. Second 30 of the video for the dimensions.
How Much Wood You Need
🥰💪💋🌈
amigo tendras las medidas
With Scale (Measurement) is highly suggested.
You can show in box😊
Next time buy some brass screw cups, also drill the pieces first and then glue and screw together at the same time.
Aye!
Facil y rapudo very good
Thank you