Thanks for the update vid Travis. I haven't updated yet. Still getting info on it from vids and comments. Thinking I might update soon though. Thx again
Although Beast Mode is something I will rarely ever use I do like the addition of DT. I think the update is worth it just for that. Plus I think its best to be running the most current software.
Thanks. I've seen a few other tests, but I haven't seen one comparing 1.13 to 1.14 . That's what I have been wanting to see so I thought other people would want to see it as well. Thanks for watching.
Glad I could help. Yeah a factory reset is a must. Not sure about this update yet, but I've heard of detectors doing some weird stuff in the past if you didn't do the factory reset.
With what nokta has give us with the legend. They have set the bar high, this mode doesn’t deserve to be on the legend. Hope they figure things out for the alpha
Recovery speed determines depth. To go super deep all you need is to lower recovery speed down to 1 or 2. With that small coil you should have no trouble pin pointing.
That's true and I do use a low recovery speed sometimes for that reason. Also a higher recovery speed helps you identify the size of targets better. Really helps on those deep cans that sound like dimes lol. Honestly I think the recovery speed is one of the most helpful tools on the legend.
Thanks for the content. Quick question….where did you get the kick stand for the legend? Every time I set my legend down it flips on its side. A little annoying. I know it doesn’t hurt it, but be nice to keep it upright.
Its a stand made for the Nokta Impact. Only thing is the impact has a round shaft so its a little tricky to get it on. If you loosen it all the way up and put in on where the stand is facing the side. Then once its on do a quarter turn to put it in position. Tighten it up and you are good to go. I like it because it folds flat to the detector so its not in your way when you are out detecting.
Hey Travis. I don’t have the Accupoint pin pointer. Do recommend still I install v1.13 update? I haven’t checked to see what else is included in v1.13. Also, if I install update v1.14, will it automatically install v1.13 update? I will be installing these updates soon. Thanks for the refresher course. 👍🏻
Good video Travis I'm like you I'm going to like the DT on the legend as for the beast I really don't think I'll be using it I tried it a little yesterday and I just don't like the tones in the gold mode. Also I tried air testing the beast last night and to me it wasn't hitting the depth as the other modes maybe you can try and see how it does for you but the BT is defiantly a keeper. I have been happy with the legend always and I never use a lot of the options such as notching or the bc rejection I try and keep it simple and just adjust enough to have it running stable and very happy to get a little extra depth with the BT when needed and keep using the tones I'm use to and like.
Yeah I don't care for the tones on gold mode either so don't think I'll be using the actual beast mode either, but I love the idea of bumping up DT when I get to an area where I might want a boost of depth.
Its a new feature with this update. Its Deep Target Identification. To access it you go to your recovery speed icon in your settings. Then push your pin point button and scroll with you left or right arrow keys till you get to DT.
I haven't had any issues with any of the updates. I keep my laptop up to date and when I click on the update tool I always make sure to click on the version I just downloaded. I never even click on the drivers file included I just click straight to the tool. Then I click run not extract and it updates like a champ.
Thanks for the info , Don't know if I will use the beast mode or not , but I am interested in the DT setup , which update is that on ? Think I am still running 1.11 or 1.13.
Well I believe a Euro coin has an iron core. So depending on your settings it may be slightly discriminated out. Turn down your IF and BC and this may help. Also hunt in discrimination pattern g.
@@TheTexanDetector sorry my friend translate it im come from Holland hij pakt echt geen munt op meer dan 30 cm zo 1 euro munt een Europees munt ter grote van 2.5cm terwijl er staat overal bij nokta objecten ter grote van 1 euro pakt die op 40 cm en grotere objecten op 1.50 cm
will not update yet their will be fixes to it 1.13 works just fine still deep when you can dig target from bottom of my foot to my knee cap and i am 5'6' that deep was only some scrap metal
I understand where you ate coming from. I was on the fence about if i was going to do the update. I don't really go for deep targets most of the time, but it is nice to have options. Took it out today so far so good.
That’s a great test. I updated mine last night, but will not be able to give it a test run for a few days.
Same Thursday I hope to be able to get out and really try it out. Can't wait to see how it handles in the dirt lol
Thanks for the update vid Travis. I haven't updated yet. Still getting info on it from vids and comments. Thinking I might update soon though. Thx again
Although Beast Mode is something I will rarely ever use I do like the addition of DT. I think the update is worth it just for that. Plus I think its best to be running the most current software.
that was a good test.i liked the way u did it.good job.and thanks for showing it.
Thanks. I've seen a few other tests, but I haven't seen one comparing 1.13 to 1.14 . That's what I have been wanting to see so I thought other people would want to see it as well. Thanks for watching.
I zoomed in on the video thank for sharing can't wait to see how it goes
I'm looking forward to using the DT in the field. Should add a boost of depth which will really come in handy.
Great video. One thing I didn’t do after updating is a factory reset. Thanks for reminding me.
Glad I could help. Yeah a factory reset is a must. Not sure about this update yet, but I've heard of detectors doing some weird stuff in the past if you didn't do the factory reset.
Nice test Travis
Thanks
With what nokta has give us with the legend. They have set the bar high, this mode doesn’t deserve to be on the legend. Hope they figure things out for the alpha
Recovery speed determines depth. To go super deep all you need is to lower recovery speed down to 1 or 2. With that small coil you should have no trouble pin pointing.
That's true and I do use a low recovery speed sometimes for that reason. Also a higher recovery speed helps you identify the size of targets better. Really helps on those deep cans that sound like dimes lol. Honestly I think the recovery speed is one of the most helpful tools on the legend.
What is the stand you have just below the control box?
Its a detector stand made for the nokta impact
@@TheTexanDetector where do I have to go to order it?
@Pirate19501 I just added a link in the description where you can find the stand 👍
Good Stuff. Now lets get your boots dirty and some deeper targets dug.. Happy Hunting Brother.. Peace
Yes sir that's when the real fun begins
Thanks for the content.
Quick question….where did you get the kick stand for the legend? Every time I set my legend down it flips on its side. A little annoying.
I know it doesn’t hurt it, but be nice to keep it upright.
Its a stand made for the Nokta Impact. Only thing is the impact has a round shaft so its a little tricky to get it on. If you loosen it all the way up and put in on where the stand is facing the side. Then once its on do a quarter turn to put it in position. Tighten it up and you are good to go. I like it because it folds flat to the detector so its not in your way when you are out detecting.
😊 I wish to see all the coins you have collected 😁
👍
Hey Travis. I don’t have the Accupoint pin pointer. Do recommend still I install v1.13 update? I haven’t checked to see what else is included in v1.13. Also, if I install update v1.14, will it automatically install v1.13 update? I will be installing these updates soon. Thanks for the refresher course. 👍🏻
I believe if you install 1.14 it will include 1.13.
@@TheTexanDetector Thanks. I’ll try it out when I get home from work. gonna hit my local park where I’ve dug up some Mercs and late 1800’s V nickels.
Good video Travis I'm like you I'm going to like the DT on the legend as for the beast I really don't think I'll be using it I tried it a little yesterday and I just don't like the tones in the gold mode.
Also I tried air testing the beast last night and to me it wasn't hitting the depth as the other modes maybe you can try and see how it does for you but the BT is defiantly a keeper.
I have been happy with the legend always and I never use a lot of the options such as notching or the bc rejection I try and keep it simple and just adjust enough to have it running stable and very happy to get a little extra depth with the BT when needed and keep using the tones I'm use to and like.
Yeah I don't care for the tones on gold mode either so don't think I'll be using the actual beast mode either, but I love the idea of bumping up DT when I get to an area where I might want a boost of depth.
according to Nokta beast mode was placed in Gold Mode because there wasn't room for it on its own, and is completely separate from Gold Mode.
Good test, I'm kind of new here, what did you mean when you said DT?
Its a new feature with this update. Its Deep Target Identification. To access it you go to your recovery speed icon in your settings. Then push your pin point button and scroll with you left or right arrow keys till you get to DT.
It you have any issues loading the new file delete old files just have 1.14 update on your computer and away you go mine kept wanting to load 1.13
I haven't had any issues with any of the updates. I keep my laptop up to date and when I click on the update tool I always make sure to click on the version I just downloaded. I never even click on the drivers file included I just click straight to the tool. Then I click run not extract and it updates like a champ.
Thanks for the info , Don't know if I will use the beast mode or not , but I am interested in the DT setup , which update is that on ? Think I am still running 1.11 or 1.13.
The DT is on the new 1.14 update.
Ok thanks
my legemt get not far then 30 cm with 1 euro coin how can that
Well I believe a Euro coin has an iron core. So depending on your settings it may be slightly discriminated out. Turn down your IF and BC and this may help. Also hunt in discrimination pattern g.
@@TheTexanDetector sorry my friend translate it im come from Holland hij pakt echt geen munt op meer dan 30 cm zo 1 euro munt een Europees munt ter grote van 2.5cm terwijl er staat overal bij nokta objecten ter grote van 1 euro pakt die op 40 cm en grotere objecten op 1.50 cm
will not update yet their will be fixes to it 1.13 works just fine still deep when you can dig target from bottom of my foot to my knee cap and i am 5'6' that deep was only some scrap metal
I understand where you ate coming from. I was on the fence about if i was going to do the update. I don't really go for deep targets most of the time, but it is nice to have options. Took it out today so far so good.