Makita 2x18V Akku-Rasentrimmer DUR365U Produkttest (vergl. m. DUR368AZ, DUR369AZ, DUR181Z)
HTML-код
- Опубликовано: 28 сен 2024
- Ich musste das Video nochmal neu schneiden. Ist schon etwas älter, aber die Infos immer noch aktuell.
Hier gibts den 2x18V Rasentrimmer: amzn.to/2VSA25k
Das ist ein etwas aktuellerer:
amzn.to/3hNctXi
Ersatzschnur: amzn.to/2O1G2o2
Der kleine Bruder vom großen Rasentrimmer:
amzn.to/3fD7EgK
und dazu Ersatzschnur: amzn.to/3wlTF5w
-------------------
Passende 18V Akkus gibt es hier:
4Ah 18V - amzn.to/2JngNtZ
5Ah 18V - amzn.to/2WQUzsb
6Ah 18V - amzn.to/2xyAoES
----------‐----
Und nun noch dies und das, was in einer Werkstatt nicht fehlen sollte:
UVEX-Arbeitshandschuhe amzn.to/2YlxrlS
15m automatischer Kabelaufroller/Kabeltrommel amzn.to/2YmRMaN
WD40-Universalspray amzn.to/3dkFkwp
WD40-Silikonspray amzn.to/3hH61i6
‐‐---------‐---‐---------------------------------
Wenn Ihr mich bei den Makita-Videos, Challenges und Mods unterstützen möchtet und mir eine Überraschung machen möchtet:
Paypal-Spende an: kurzemail.sebastian(at)gmail.com
Makita-Wunschliste: www.amazon.de/...
Vielen Dank schon mal im Voraus.
Hey, cooles Video aber ich hab den Vergleich zum 369 und 368 Vermisst, wie es im Titel Stand. Kann mir da vielleicht jemand weiterhelfen? Ich finde den Unterschied leider nicht.
Ja leider nicht so gut. "Project Farm" macht gute Vergleiche!
Der Umbau ist hier unglaublich kompliziert gelöst von Makita. Hab die DUR369AZ, da geht das Ruckzuck: Schutzerweiterung wird einfach an-/abgeklippst, Fadenkopf direkt aufs Gewinde resp. Messer auf selbiges drauf und noch ein Druckstück+Mutter drauf fertig. Ist mit dem mitgelieferten Werkzeug in weniger als einer Minute erledigt
Sehr gut! Danke.
Schutzbrille, mein Freund?
je das ist ultra fahrlässig
sind das deine Augen? ne,also
Hallo, soweit alles gut erklärt. Aber!
Bei der Montage der Mähköpfe, hier zum Beispiel des Fadenkopfes muß meiner Meinung nach die Aufnahmescheibe vorher wieder drauf, dann erst der Mähkopf (ab Minute 9:06). So ist es auch beschrieben in der Anleitung. Also aufpassen! Das hat der Kollege hier nicht gemacht. Grüße.
Ich habe mich für die Dux18 als Freischneider-Gerät entschieden. Da gibt es auch viele Aufsätze wie Hochentaster, Kultivator, Kehrbürste usw. Die Aufsätze sind aber unverschämt teuer. Vielleicht kennt jemand ja kompatible Aufsätze anderer Hersteller die auch passen?
Amazon holft
Nice presentation. I have this 1 year. I want to clean the head-motor. Hiw can i do that without damage the motor?
Just be careful 😉
I got the grass trimmer. I did not mount knife or nylon head, i just tried to press the speed button, and when it reached faster spinning speed it made a hit, like a hit on the metal. I tried it again and i heard the hit again. On the third time, there was no hit. Basically i heard two hits in the gear box. Do you know what is that, or should i send it back for the reclamation ?
Did you heard the same hit from the gear box ?
Does it means gear box is changing speed on the tool because it is new, so it has to be that hit ?
Hmm doesnt sound good...
@@DefenderJames
I have bought the dur369. Now i tried to spin that black bell under gear box with my hand and heard nothing. Then i tried to spin the metallic ring above the black bell with my hand and it made that loud hit sound again. Firstly, i was so happy that it is not coming from the gear box haha. Then i removed the black bell, put the classic nylon head and tried to spin it with power and finally, there was no hitting sound. Man, what a stress relief haha. Probably the black bell that holds the metallic ring was ringing while touching the metallic ring under the massive speed. But, who knows, i cant see anything on 5000 rpm haha. First i was confused how to remove the black bell, because inbus key did not want to sit in the gear box hole, i was like, oh my god this is broken too. But, then i realized that i have to go in reverse a little bit so the key can sit in the hole haha. I have old dolmar trimmer, works the completely opposite way haha. I just hope that i do not hear that loud hitting sound when i install the knife or the circular blade. That will be a very scary sound haha
Wieder mal ein sehr informatives Video !! Danke …
Tolles Erklärungsvideo! Dankeschön!
Sehr gerne!