@@TechnologyHive Not sure if you've changed your presentation, but could you point to the connector you're talking about in the future. Without actually pointing out these connectors, a noob wouldn't have any idea about where "here" is when you say things like "here you'll find" so and so xD
Thank you for the review.. Just bought this board for a build I'm doing for my neighbor. He's going from 10-12 year old intel something or other with 2gigs of ddr2... Now he has ryzen 3400g, vulcan 3000mhz, intel nvme 500gig ssd Corsair 450w bronze psu. It's going to blow his 73 year old mind! Total cost with a smaller monitor and the cheapest glass side panel case on newegg was $730. Not too bad.
1070, ryzen 5 3600, 500gb ssd, 16gb 3200mhz ddr4 ram, this motherboard, 100£ case, corsair 750W bronze psu, all for 800£, do you live on the moon with that pc price or what cause for 730 a 3400g is cheaping tf out, and 450w
I am thinking of this. I usually buy motherboards full of features I never use. This time I think I will be happy with something a little less extreme.
Just built a pc with this board. Does the things it should for the price. Yes, the 1 fan header thing is not optimal, but run a splitter for two or two fans and run the rest with your psu. That's what I’m doing. Plus if you're going for this mobo, it means you don't have a lot to spend, and you'll probably buy a cpu you won't need to overclock at all.
Have the exact same board for an Athlon 200 GE. Great review,, It is how you described it. It CAN overclock, but because of the lack proper the cooling for VRM, it MAY not be a good Idea for a 24*7 overclocked set up. They are cheap but a good entry level board. Waiting for a R7 1700 (used) i ordered to pair with this.
Yes true. Not for 24-7 oc though you can still do some overclocking, it is not suited well for squeezing the most out of your cpu. With the 1700 you have coming this will be a good setup! I'm sure you will be happy with the combo.
@@toonflix3757 I oced my 2600 to 4.1 GHz without any problems on this board: the vrms dont go over 70° in prime95 small ffs and the cpu is stable ( on only 1.23V, I may have a golden or silver chip). I even tried 4.2 GHz but the cpu got to 78°C in stress testing and IT was very unstable. The board handled it even so just fine. The vrm temps are very decent on mine, hope the board can hold me 2 years+ with OC.
does that mean that only one case fan can be installed? also, splitters do exist right? so is it possible to get a splitter and turn that connector into two? i'm sorry if this is not what you meant i'm just kinda concerned because i'm ordering my first ever build and i will probably need more than one case fan
Really good budget board, i use it for 5 months now and it works really good for things i need. I am running 2600 @ 4Ghz and VRM is usually around 70c so there is some headroom, cpu usually draws around 120-140W when in load. At idle VRM is around 45-50c. As you said voltage might be problem but unless you plan on going over 1.4V you will be fine. Only thing i don't like is that there are only 2 fan headers (cpu and chassis).
There are Y splitter cables made by Noctua you can buy to the lack of fan headers. And yes, it is a great board for the money. Basic and will let you get some extra performance as long as one does not go overboard. Thanks for watching btw!
@@TechnologyHive Luckly 212 turbo comes with splitter and i got extra one more for case fans, but it would be nice to control intake and exhaust separately from cpu speed.
@@ray4493 I used 212 Evo turbo at that time but now i use cheap "Snowman" cooler from aliex. It works pretty much same but for 1/3rd of the price. I think i only had 3.7Ghz boost with stock cooler when i was rendering or playing for longer periods.
a really nice mobo: 1) only 215mm in width, while still maintaining 4 ram slots which is quite uncommon. 2) on f41 it supports pcie 4.0 no problem (nvme and main gpu slot), and the bios can be downgraded/upgraded directly from q-flash without any restrictions 3) overall decent fan control, better than most msi. 4) Its got a small heatsink as well, really needed as i run it with ryzen 9 3900 (vrm at 75C in prime95) haha Fits perfectly in Jonsbo c2, which is a pretty compact case thats still compatible with standard sized components.
Great motherboard i pair it with R5 2600x , kingstone hyper X 2*8gb ddr4 3200mhz and work on 3200mhz without change any voltage ,bios updated from f 40 to f 50 and i got Asrock RX590 phantom gaming must say all work perfect with lc power cooler rgb i got stable temp 30 c procesor
I bought this motherboard recently and I have some things to say When using my GPU (Sapphire Pulse Radeon RX 580) with the board, two of the SATA ports were covered. This motherboard is mATX There is only 2 can spots, one is used for the cpu so if you want more than one fan you need a fan hub The GPU may also cover the PCIE x1
Same issue, great board good performance but my GTX3060 makes two of the ports unusable :( Do wonder in the manufacturers do this on purpose on there cheaper options.
@@TheSkunkyMonk well you could just search the graphics card name example: Msi ventus RTX 3050. then you would find their page saying it’s length or you could just give me the graphics card name exactly and i would search that would help alot!
Please be aware that this motherboard only has 4 SATA connections and when a dual slot graphics card is plugged into the Pci-e16 slot 2 of the SATA connections are blocked by the size of the card so you are unable to use them.
Most likely too late but I do recommend a GTX 1660 Super as a good upgrade Can find one at $200+ brand new and is roughly equivalent in power to a GTX 1070 (but uses alot less wattage and much better streaming codecs)
I am using this motherboard with Ryzen 2600 and RX580. I have not really got into overclocking but I am open to try in the future. One thing to be aware of: the SATA ports are in a terrible location. My graphics card barely seats in the slot with two SATA cables plugged in. Three SATA cables and a graphics card is a no go. The PS/2 port is nice. I am using a PS/2 keyboard (Cherry ML4100).
I used 2 L-shaped sata cables, it was a tight fit but it works. Alternatively low profile sata cables from delock will work fine. OC is broken after bios F1, and even then, with stable prime 95 validated 3.7GHz , the pc wont wake from sleep. So realistically, Ryzen master is only option for OC. #Shitabyte
This board was my first AM4 MOBO, i paired it with the 200GE and 2 x 4GB Crucial Ballistix Sports RAM, as a starting build, was planning to upgrade the CPU and get a GPU at a later time, the Board died on me in 3 months, good thing it was on warranty and I had it replaced/repaired. They said the socket went bad for some reason. First time a Gigabyte board breakdown on me. But it is still a cheap option for a B450 chipset. Still running ok,, CPU is now a 2600 and GPU is RX 470.
after you changed the core voltage of the CPU to 4.20Ghz, did you change any voltage too? If yes, what is it? what cooler are you also using for your Ryzen 5 2600?
I have two PC using this same Motherboard nothing fancy but it gets the job done, for a budget PC build for under $400 using the Ryzen 3 3200G graphic, since I'm not using the PC for any games that requires a better graphics
Nice video. Surprised that a lot of people can't comprehend what you are saying. The board CAN overclock, however it can at best do a really small overclock(that you can use permanently without worrying about your PC dying), one which might not even be worth stressing your system over it, especially if you are mostly interested in gaming. The mobo doesn't allow to do overclocks that actually make a big difference. That said it's good enough for people who have no idea how to overclock and being able to hit even 4Ghz in my opinion is good enough for these type of people. I wouldn't recommend serious overclocking to people who aren't 100% sure what they are doing cause there could be a lot of issues, well at least not now while their system is sparkling new... maybe few years down the road when they feel like the systems is starting to struggle and they want to get the max out of it... that's when you risk it :D
Correct. This is a basic board which you can do some overclocking. But it is NOT a board for overclocking. The best analogy I can make is that this is like a Ford Mustang. It can go fast, but it is not a race car. Some motherboards, like MSI ACE Z390 motherboard, are designed with overclocking in mind. Thus you have good heatsinks on the VRM's, plenty of overclocking features in the BIOS, like LLC. It also packs a 13 phase VRM and other things which I would say are"for overclocking". But I can understand how some people take it to heart when you say the board is less than what they think it is. Especially if they own it. I do not mean it in a derogatory way. I am just simply stating facts. Thanks for watching and for your input!
@@TechnologyHive Can i buy 3000Mhz Ram on this motherboard and is this work ? Because this motherboard supports DDR4 3200(O.C.)/2933/2667/2400/2133 MHz ! Srry for my English
2020 and went for it. Since parts are hella expensive where I live I needed to squeeze out money without compromising on the performance. I’m using it with a Ryzen 5 2600. And yes overclocking IS very much possible with this MB. But with every board no matter how much pricey it is there comes a risk of shortage and other voltage related issues. So here goes my overclocked setup: 1. Ryzen 5 2600@3.9GHz with base 3.4GHz 2. Corsair vengeance 8GB*2(16GB)@2933MHz with base 2400MHz 3. GTX 1660 Super 6GB@2070MHz(core-clock) OC. So as you can see I’ve maxed out each and every component to it’s max supported clock range on this motherboard. For budget builders or students this MB is likely the best option. Now performance: Overclocking is basically the best thing you could do if your PC is struggling with performance. In games like NFS Heat, AC Origins or other CPU oriented games or apps like Cinebench has shown satisfying performance improvement which was not possible without that CPU overclocking. Caution: Your Ryzen CPU will likely shutdown on its own if thermal limits are reached(95c) and the MB failing to get the overclocking results in possible black screen. THIS IS dangerous.
@@Richieesgarage I mean your setup is kinda indentical to me. 2600 gives almost the same performance as 2600x when overclocked. Board doesn't come with big LEDs built-in.
@@dkincorporated3060 It's gonna be perfect for an Athlon 200ge. Just remember that Athlons can only run Sata 3, so the M.2 drive would have to be SATA 3, if even used, not PCIE.
Thanks for the insight. One year after buying my processor (Ryzen 7 1700x) and board (Asus Prime B350M-E) online I finished paying some emergency costs and was ready to finally build my PC. Turns out there is a problem with my board and I need to find a budget AM4, DDR4 board if I want to buy the rest of the parts this same month.
7:00 What's that huge Coolermaster metal box with the fan that's connected to the CPU. I've only seen basic fans on top of CPU's, is that huge metal box thing necessary for CPU cooling?
Just Build My First PC using this board, with the R5 3600 clocked at 4.2GHz and running well, also using the 1650 Super, so plenty capable enough for me.
@@bahaa976 through the bios, there are plenty of videos to show the best way to do it. However make sure you follow the tutorial and overclock at your own risk,l
@@kamel1710 I oced my 2600 to 4.1 GHz without any problems on this board: the vrms dont go over 70° in prime95 small ffs and the cpu is stable ( on only 1.23V, I may have a golden or silver chip). I even tried 4.2 GHz but the cpu got to 78°C in stress testing and IT was very unstable. The board handled it even so just fine. The vrm temps are very decent on mine, hope the board can hold me 2 years+ with OC.
I only could get my Ryzen 5 2600 to 3.9GHz on this MB. Anything higher than that and it gives black screen in any stress test(AIDA64, NFS Heat). Probably because I’m using the stock wraith stealth cooler. Aftermarket coolers seem like a hassle to fit and may even damage the mb so I am reluctant to give them a try.
@Angelo Luhmän Kartodirijo Highest would be 113c and I have seen even avg reaching up to 96c before black screen. Any suggestion on cooler or voltage? Currently 3.8GHz@1.296v.
@@parishj3 Sorry man, but I'm just a poor guy! kkkkkkkk Here in Brazil it costs a LOT of money, I was forced to go from 2700 not x, thinking about future overclocking. + 16gb 3000mhz. I think it will make my 1080 flow better!
I'm getting a weird issue whereby it wont boot to WIN10, when I tried an old WIN7 DVD the first setup screen would cause all USB to switch of, no power, no matter which USB I tried, I am using an old BIOS, but Ive no clue an this is the 2nd Gigabyte DS3H to do this, with the first killing a stick of 2400mhz RAM?
@@TechnologyHive I did as you said, although the latest 40 BIOS wasnt recognised the 32 BIOS updated fine an I was able to install an boot, will order 2 sticks of 4 GB RAM an thats that I hope :) TL:DR This worked, cheers pal :)
I got this motherboard with a GTX 1650 Super Graphics Card, Ryzen 5 1600 CPU, 500W Power Supply, 16GB RAM, and a 500GB SSD. Still waiting for all the parts in the mail. This is my first time building my own PC so I would appreciate some advice and tips
I had to buy this motherboard as a replacement to my msi b350m Bazooka that I accidentally broke a capacitor and solder point over the vrm by trying to look around at the vrm heatsink. I am not disappointed at the motherboard as for the price, it allows me to use my system again. I was a little disappointed that it didn't have two sys fan headers, but that was an easy fix as my liquid cooler came with a fan splitter so I was able to add all my fans to it. I will explore overclocking my r7 1700 back to 3.8ghz. I don't need a massive overclock, just something to make the cpu work a little faster for android compilation and development. I miss my other motherboard though because it looked nicer and I got it for 45 dollars.
It is not the best top of the line board for sure. Some have even written bad reviews on it and complained it arrived doa. But my experience with it has been very positive for what I paid. No complains at all. Overall good little board to hold you up :)
@Dylan Roof Of course your MoBo can handle that card, why not? the problem is not the MotherBoard, is the CPU. What CPU you're planning to paring with?
RetroHarden hey i’m building a budget pc (trying to stay under 250€) and i already know what gpu and mobo i’m going to buy, but i’m not sure about what cpu i should i buy. i’m considering the ryzen 5 1600 (which i found at 100€) or the ryzen 3 1200 (which i found at 35€... yeah). i’m planning to use this pc for composing music and do a little bit of gaming (full hd mid-low settings.. maybe?) sorry for the long message i’m new to pc building
i actually have it in my current build. but honestly only get this mb if youre looking for a budget build. if you want here is my build pcpartpicker.com/user/Valboys/saved/wf83t6
@@valboys3453 Why do you say that exactly? I'm limited to a micro-ATX due to my case size and I'm looking to move to AMD so I need a new board. Which do you recommend?
@@adamkeyes5406 I'm not the best to ask but this board function very well I've had no issues. But it also depends on what you're using it for. It only gas 2 fan headers and if you use a triple fan or even some double fans itll block some sata connections. If you have the money look for a better board, my favorite ones are Asus brand but they're more expensive.
Hey man im building my second pc (first build by myself) and im not sure about my front panel connectors as in which pin they go on and am i able to test to see if it works without the cpu
Bottom left two pins are for HDD. Top left pins are for power Led. Top right pins right next to power led are for power switch. Bottom right are reset switch. Common pin set up on most boards.
Can i buy 3000Mhz Ram on this motherboard and is this work ? Because this motherboard supports DDR4 3200(O.C.)/2933/2667/2400/2133 MHz ! Srry for my English
I have this Board. It's ok, but the positioning of the Sata Sockets is terrible. Then of course Gigabyte Software is largely just rubbish. i.e. the RGB Fusion but also the App center more often than not fail to update so you have to do it manually. The App center constantly tries to trick you into installing a large collection of 3rd party programs you may or may not want. All you have to do is uncheck them, but that becomes pretty annoying if you find you have to try multiple times to update something when the update keeps failing. I'm about to put a 3900X in it and I am a little concerned about the VRM's being able to deliver enough power during high load. Currently, have R5 2600 installed and have not had any problems with that, but I guess I will see when I put the R9 3900X in. I may possibly need to put little heat sinks on the VRM's/Fets
Im getting a r5 2600x and 1660 ti. Im planning on getting this case, and im wondering if it would perfectly fine for normal gaming/usage (no overclock)
It should work just fine. The 2600x will overclock itself just fine thanks to xfr. If you get this same case I'd go for a blower style card since the case does not have the best air flow options.
@@TechnologyHive Then another question for this assembly that the person wrote. Will this be all, and in particular, the processor work on RAM with a frequency of 2133 MHz, and will it be possible to overclock it?
I have this Mobo and it sucks it only has one sys fan. I had to get a fan hub. Also I have a question. Right now I'm building my own PC . I have not installed the CPU or GPU yet. But I did install RGB ram just to test it. My Mobo is connected to my power supply. But the RGB on my ram isn't turning on. It has nothing to do with the CPU and GPU. I don't understand :(
I oced my 2600 to 4.1 GHz without any problems on this board: the vrms dont go over 70° in prime95 small ffs and the cpu is stable ( on only 1.23V, I may have a golden or silver chip). I even tried 4.2 GHz but the cpu got to 78°C in stress testing and IT was very unstable. The board handled it even so just fine. The vrm temps are very decent on mine, hope the board can hold me 2 years+ with OC.
@Fury The Epic without knowing your setup, sounds like you could have another device that might be stealing priority over the mic that's not working. Also the mic may be disabled in the bios? Worst case you could pick up a USB adapter that gives you a microphone port to bypass the issue
will it work with a ryzen 3 3200g? because I built my friend a pc part list but his dad completely ignored it and bought this motherboard. I recommended the b450m pro 4 because its ryzen 3000 ready
This thing has an almost identical VRM to the ASUS Strix F (exact same CPU mosfets) - the only difference is in the chokes, controller and graphics stages. This is ridiculously good for a board half the price (though ASUS motherboards are usually a total rip-off in general).
Don’t think you gave this board enough credit to be honest. Still a good review though. Ryzen 7 3700X G Skill Ripjaws 64gb 3200mhz RAM Samsung 980 PRO 1tb SSD Inland NVMe 1tb M.2 GTX 1080 FTW3 11GB Asus ROG Ryoujin AIO. EVGA SuperNOVA G2 750 This board handles all of that with ease.
@@Bryan-ix7ue he shows it in the video. There aren't extra features for overclocking, but you can still do it. So not only are you wrong, you're an asshole.
Greetings..Does this board needs bios update or it's ready to go out of the box. i have 9TH gen i3 9100 cpu,Do you have any other suggestions for little bit higher quality. board ?thanks
What was wrong with yours? I bought one and built a system with it, and when i tried to power it on it turned on for a second and powered back off. I returned it but got the same one and have the same problem, trying to replace my power supply now
Hey man thanks for the review first and Is over clocking a very important thing ? I’m panning to get Ryzen 5 2600, rtx 2060 and 16gb 3000mhz ram on this motherboard and I don’t want my build to be limited because of one part but this is very affordable so what do you say
I say you wait a few more months for Ryzen 2. But if you must build it today, this board with fast ram will suffice. Overclocking is not a must have. But it is a nice option to have. This little board is plenty.
@@madoiscool If you pair the R5 2600 with fast memory, and you overclock that cpu, it will push the RTX 2060 to its limit. Especially at 1440 resolution. BTW the RX580 is a nice card.
I have the built in wifi version of this board, and mine didn't come with an m.2 standoff. I had to screw the m.2 directly into the motherboard, which is almost certainly wrong. Is the board supposed to come with a standoff, or did I just lose it?
Strange... I have this Exact Board and I see 4.2 GHz on the regular from my 2600x and you don't need an all core Overclock for Ryzen... XFR does that just fine, though I did get 4.2 GHz Stable... My Ram is at a stable 3000 MHz and could hold 3200 MHz but there is little improvement... My CPU Idle is 30c and my max load is 68c. My Zotac GTX 1070 Mini hits 1960 MHz boost and fluffs at 65c the most I have seen the Vrms and Mosfet at was 52c... Hell the only Cons I have found is the Position of the Sata, the x4 slot and poor Positioning of the Case Fan Header, also if you populate the M.2 Nvme you lose one Sata Port Ironically the one that is in the worst position if one has a Long GPU. But that was something I was aware of... As they Share the PCIE Lane... For a Budget Board it will do just fine until B650 is a thing. I have seen much worse...
@@user-cc2fm4vu2x Look around in the bios for Power LED I think it's in there but I recall seeing it. I didn't bother changing that cause Orange suited the Zotac 1070 I have and my friend had a spare prism cooler so I made that Orange as well...
@@user-cc2fm4vu2x Right well I had a dig thru the Bios and I have concluded that the Boards Little Strip will only ever be Orange or Off though you can connect an LED Strip and Address the Color Course I am fine with the Orange.
@@user-cc2fm4vu2x Well at least everything else is fine. I was not looking for anything crazy just functional overall and several parts are second hand got the 1070 for $185 cleaned up real nice.
I built a new PC last weekend including this motherboard, Gigabyte B450M DS3H vF50. The problem is NO function keys during startup screen before I access the BIOS Setup program, press the key during the POST. Please help me with a fix. Thanks.
@@TechnologyHive do you think I can use the turbo settings for the intel i5? Because some people are saying it killed their boards, and even using more than one core can be enough to destroy it. On top of that, others were saying it killed their ram and monitors, is that even possible?
I bought this bought yesterday, I don't know why I can not change the muiltiplier, click on this field but no happen, no popup show like the begining of a youtuber's video: ruclips.net/video/ceKOJQmOhAc/видео.html
is this board ok for my Ryzen 7 PRO 1700x? I'm not planning to OC, even the ram will run on its stock speeds, I'm only gaming and nothing else. Will my VRM temps be an issue?
hi i have this mobo and a ryzen 5 2600 just like you, I got it just this month. I tried XMP on this to get 3200hz on my ram but games keep crashing. howd you do it, i mean how did you max 3200hz on ram? btw i have 8x2 16gb ram hyper x fury, if that matters. thanks, i hope you reply
I buyed this socket,is very good,single problem of mine is ,to little and vga with his cooler,practicaly deny another slot for audio card or card for internet.
Just built a PC with this board. It's more than fine.
Great to hear!
Thank you
Thanks for saving my time
Christopher Little hey can you help me with an upgrade of something do you have discord or anything
Games Fun I don’t. What do you need help with.
That's the coolest looking B.I.O.S screen I have ever seen
i was looking for a motherboard setup guide for this earlier and u made my day x2
Glad to help :)
Does it support 3600mhz ram?
@@gamingvariation1323 it does not support 3600. The highest supported is 3200.
@@TechnologyHive Not sure if you've changed your presentation, but could you point to the connector you're talking about in the future. Without actually pointing out these connectors, a noob wouldn't have any idea about where "here" is when you say things like "here you'll find" so and so xD
Thank you for the review.. Just bought this board for a build I'm doing for my neighbor. He's going from 10-12 year old intel something or other with 2gigs of ddr2... Now he has ryzen 3400g, vulcan 3000mhz, intel nvme 500gig ssd Corsair 450w bronze psu. It's going to blow his 73 year old mind! Total cost with a smaller monitor and the cheapest glass side panel case on newegg was $730. Not too bad.
@@carp3t no.
carpetsushi 😭😭
carpetsushi what a sad story :( i hope you’ll find him again
You're a great neighbor
1070, ryzen 5 3600, 500gb ssd, 16gb 3200mhz ddr4 ram, this motherboard, 100£ case, corsair 750W bronze psu, all for 800£, do you live on the moon with that pc price or what cause for 730 a 3400g is cheaping tf out, and 450w
I am thinking of this. I usually buy motherboards full of features I never use. This time I think I will be happy with something a little less extreme.
Very informative video review, it was nice that you zoomed into the different parts of the board as you discussed them, thank you very much!
Can you help me?
Just built a pc with this board. Does the things it should for the price. Yes, the 1 fan header thing is not optimal, but run a splitter for two or two fans and run the rest with your psu. That's what I’m doing. Plus if you're going for this mobo, it means you don't have a lot to spend, and you'll probably buy a cpu you won't need to overclock at all.
Have the exact same board for an Athlon 200 GE. Great review,, It is how you described it. It CAN overclock, but because of the lack proper the cooling for VRM, it MAY not be a good Idea for a 24*7 overclocked set up. They are cheap but a good entry level board. Waiting for a R7 1700 (used) i ordered to pair with this.
Yes true. Not for 24-7 oc though you can still do some overclocking, it is not suited well for squeezing the most out of your cpu. With the 1700 you have coming this will be a good setup! I'm sure you will be happy with the combo.
@@TechnologyHive heyy budd im using 2600 can i oc using this?
@@toonflix3757 I oced my 2600 to 4.1 GHz without any problems on this board: the vrms dont go over 70° in prime95 small ffs and the cpu is stable ( on only 1.23V, I may have a golden or silver chip). I even tried 4.2 GHz but the cpu got to 78°C in stress testing and IT was very unstable. The board handled it even so just fine. The vrm temps are very decent on mine, hope the board can hold me 2 years+ with OC.
@@toonflix3757 just take it easy with the voltage.
@@TechnologyHive Does THIS mobo have good vrms?
BEWARE: There is only 1 System Fan connector on the board, as well as 1 CPU fan connector
does that mean that only one case fan can be installed? also, splitters do exist right? so is it possible to get a splitter and turn that connector into two?
i'm sorry if this is not what you meant i'm just kinda concerned because i'm ordering my first ever build and i will probably need more than one case fan
@@luka7624 yes you can use fan splitters and plug three case fan or even four
thanks guys!
I hooked my three socket in a four pin and it works
Where could I find that type of splitter?
Really good budget board, i use it for 5 months now and it works really good for things i need. I am running 2600 @ 4Ghz and VRM is usually around 70c so there is some headroom, cpu usually draws around 120-140W when in load. At idle VRM is around 45-50c. As you said voltage might be problem but unless you plan on going over 1.4V you will be fine. Only thing i don't like is that there are only 2 fan headers (cpu and chassis).
There are Y splitter cables made by Noctua you can buy to the lack of fan headers. And yes, it is a great board for the money. Basic and will let you get some extra performance as long as one does not go overboard. Thanks for watching btw!
@@TechnologyHive Luckly 212 turbo comes with splitter and i got extra one more for case fans, but it would be nice to control intake and exhaust separately from cpu speed.
Cekpi7 late but I just wanted to ask what cooler you are using Ryzen 2600?? I mean my stock wraith stealth cooler barely can keep up with 3.9GHz.
@@ray4493 I used 212 Evo turbo at that time but now i use cheap "Snowman" cooler from aliex. It works pretty much same but for 1/3rd of the price.
I think i only had 3.7Ghz boost with stock cooler when i was rendering or playing for longer periods.
a really nice mobo: 1) only 215mm in width, while still maintaining 4 ram slots which is quite uncommon. 2) on f41 it supports pcie 4.0 no problem (nvme and main gpu slot), and the bios can be downgraded/upgraded directly from q-flash without any restrictions 3) overall decent fan control, better than most msi. 4) Its got a small heatsink as well, really needed as i run it with ryzen 9 3900 (vrm at 75C in prime95) haha
Fits perfectly in Jonsbo c2, which is a pretty compact case thats still compatible with standard sized components.
Great motherboard i pair it with R5 2600x , kingstone hyper X 2*8gb ddr4 3200mhz and work on 3200mhz without change any voltage ,bios updated from f 40 to f 50 and i got Asrock RX590 phantom gaming must say all work perfect with lc power cooler rgb i got stable temp 30 c procesor
I bought this motherboard recently and I have some things to say
When using my GPU (Sapphire Pulse Radeon RX 580) with the board, two of the SATA ports were covered.
This motherboard is mATX
There is only 2 can spots, one is used for the cpu so if you want more than one fan you need a fan hub
The GPU may also cover the PCIE x1
Same issue, great board good performance but my GTX3060 makes two of the ports unusable :( Do wonder in the manufacturers do this on purpose on there cheaper options.
@@TheSkunkyMonk I bought this board already and what still left is the GPU may i ask your RTX 3060 Length?
@@Yorqk511 You may but my puter is up in the loft so I wont be going to look any time soon. it was a fair size though
@@TheSkunkyMonk well you could just search the graphics card name example: Msi ventus RTX 3050. then you would find their page saying it’s length or you could just give me the graphics card name exactly and i would search that would help alot!
I overclocked this board just fine and I had it since release...
What overclock? cpu or ram dude?
Please be aware that this motherboard only has 4 SATA connections and when a dual slot graphics card is plugged into the Pci-e16 slot 2 of the SATA connections are blocked by the size of the card so you are unable to use them.
Rofl that sux.
Can't you use those SATA cables that have 90 degrees connector?
@@filipe.estima No,theres just not enough room...there the first ones I tried...
And are all decent graphics cards "dual slot"?
@@samuelcf97 a maioria sim. Mas convenhamos você não precisa de 4 HDs ao mesmo tempo
Wow. Exact contend that I needed. Thank you for the informative video! I hope you can upload some more when b550m mobos come out
Can you help me?
Nice zeta profile pic
I just bought this! I’m doing a budget upgrade from my Intel i5 2400 to Ryzen 5 1600 AF. Gonna be keeping my GTX 960 until I can upgrade my GPU
Very nice choice! I recommend buying an rx570 or better gpu
no i wouldnt buy a rx card. i would look out on the second hand market imo.
Most likely too late but I do recommend a GTX 1660 Super as a good upgrade
Can find one at $200+ brand new and is roughly equivalent in power to a GTX 1070 (but uses alot less wattage and much better streaming codecs)
FirPstl not too late haha. I’ll actually look into that. Thanks!
7:31 what case is that?
This is the Fractal core 1100
I am using this motherboard with Ryzen 2600 and RX580. I have not really got into overclocking but I am open to try in the future. One thing to be aware of: the SATA ports are in a terrible location. My graphics card barely seats in the slot with two SATA cables plugged in. Three SATA cables and a graphics card is a no go. The PS/2 port is nice. I am using a PS/2 keyboard (Cherry ML4100).
I used 2 L-shaped sata cables, it was a tight fit but it works. Alternatively low profile sata cables from delock will work fine. OC is broken after bios F1, and even then, with stable prime 95 validated 3.7GHz , the pc wont wake from sleep. So realistically, Ryzen master is only option for OC. #Shitabyte
I got the motherboard on Amazon for 50 cause it was on sale, really good for its price
Great video man, well done
This board was my first AM4 MOBO, i paired it with the 200GE and 2 x 4GB Crucial Ballistix Sports RAM, as a starting build, was planning to upgrade the CPU and get a GPU at a later time, the Board died on me in 3 months, good thing it was on warranty and I had it replaced/repaired. They said the socket went bad for some reason. First time a Gigabyte board breakdown on me. But it is still a cheap option for a B450 chipset. Still running ok,, CPU is now a 2600 and GPU is RX 470.
Things I didn’t like was 1 fan header and slot gets covered when you put video card in.
i have same board i have 2 rams x8gb 1 graphic 1660 6gb and procesor fan + still i have space to put 2 more rams and 1 more graphic card
I was able to overclock my Amd athlon 3000g to 3.8 ghz on this motherboard and I have had no issues
Cuz thats a shitty old cpu
aluwz it’s not shitty it is just budget
after you changed the core voltage of the CPU to 4.20Ghz, did you change any voltage too? If yes, what is it? what cooler are you also using for your Ryzen 5 2600?
I have two PC using this same Motherboard nothing fancy but it gets the job done, for a budget PC build for under $400 using the Ryzen 3 3200G graphic, since I'm not using the PC for any games that requires a better graphics
I bought two of these boards. Both PCs built from it does really well.
Sydney Forrester hey can I put 2x8 ram is there space
zenXS I put a 4 x 8 kit in one and a 2 x 8 in another and both worked great
Sydney Forrester ok thank you
I’m curious What was your budget for your build
Exp OsKiyy $700 for the machine with a RX580 and $550 for a machine with a GTX 1050ti
Nice video.
Surprised that a lot of people can't comprehend what you are saying. The board CAN overclock, however it can at best do a really small overclock(that you can use permanently without worrying about your PC dying), one which might not even be worth stressing your system over it, especially if you are mostly interested in gaming. The mobo doesn't allow to do overclocks that actually make a big difference.
That said it's good enough for people who have no idea how to overclock and being able to hit even 4Ghz in my opinion is good enough for these type of people. I wouldn't recommend serious overclocking to people who aren't 100% sure what they are doing cause there could be a lot of issues, well at least not now while their system is sparkling new... maybe few years down the road when they feel like the systems is starting to struggle and they want to get the max out of it... that's when you risk it :D
Correct. This is a basic board which you can do some overclocking. But it is NOT a board for overclocking. The best analogy I can make is that this is like a Ford Mustang. It can go fast, but it is not a race car. Some motherboards, like MSI ACE Z390 motherboard, are designed with overclocking in mind. Thus you have good heatsinks on the VRM's, plenty of overclocking features in the BIOS, like LLC. It also packs a 13 phase VRM and other things which I would say are"for overclocking". But I can understand how some people take it to heart when you say the board is less than what they think it is. Especially if they own it. I do not mean it in a derogatory way. I am just simply stating facts. Thanks for watching and for your input!
It's pretty decent for 2nd gen ryzen. No overclocking required.
Is it compatible with the Ryzen 5 2600 out of the box?
Yeppp
i mean its am4 so yeah
No NVME ? and no M2 drive slots ? Thats nuts on a new M'Board.
Yes there is an NVME M.2 slot which is connected to the CPU. I might have missed that in the video.👍
Great review, well done, great review
Thank you 😊
@@TechnologyHive Can i buy 3000Mhz Ram on this motherboard and is this work ? Because this motherboard supports DDR4 3200(O.C.)/2933/2667/2400/2133 MHz ! Srry for my English
I didnt understand well i want to know if this motherboard can support ryzen 5 5600X with ram speed up to 3200mhz?
Yes it will. I have ram running at 3800Mhz using this board.
Thanks for the review. Amazon is still selling it. Do you know if there will be a bios upgrade so it can run the new Ryzen 3 CPU's?
its already came with ready ryzen 3 processor
I just built a pc with this motherboard and it performs really well. Works great
what cpu and gpu did you use?
YourMessiah my cpu is a ryzen threadripper and my gpu is GeForce GTX 1660 Ti
what case?
Ryzen 5 3600 and gtx 1660 super
Are these supported?
That’s the same build I ordered I’m hoping it works with this motherboard
2020 and went for it. Since parts are hella expensive where I live I needed to squeeze out money without compromising on the performance. I’m using it with a Ryzen 5 2600. And yes overclocking IS very much possible with this MB. But with every board no matter how much pricey it is there comes a risk of shortage and other voltage related issues.
So here goes my overclocked setup:
1. Ryzen 5 2600@3.9GHz with base 3.4GHz
2. Corsair vengeance 8GB*2(16GB)@2933MHz with base 2400MHz
3. GTX 1660 Super 6GB@2070MHz(core-clock) OC.
So as you can see I’ve maxed out each and every component to it’s max supported clock range on this motherboard. For budget builders or students this MB is likely the best option.
Now performance: Overclocking is basically the best thing you could do if your PC is struggling with performance. In games like NFS Heat, AC Origins or other CPU oriented games or apps like Cinebench has shown satisfying performance improvement which was not possible without that CPU overclocking.
Caution: Your Ryzen CPU will likely shutdown on its own if thermal limits are reached(95c) and the MB failing to get the overclocking results in possible black screen. THIS IS dangerous.
so worth getting if you can pick it up brand new for £40 ? will be running 16gb hyper x fury black ddr4 ram 3200mhz and ryzen 5 2600x
@@Richieesgarage I mean your setup is kinda indentical to me. 2600 gives almost the same performance as 2600x when overclocked. Board doesn't come with big LEDs built-in.
Ra y I might buy it then
Hi. When you placed the GTX 1660 super, does it cover the 2 sata slots? or the 4 sata slots still accessible and can be used?
This mobo with new ryzen 3 3600. Do you think its a good a config? I have 2 8gb ddr4 3000mhz ram.
It's okay, just update your bios to f32 and then f40 and you're done!
@@xristos_ziar I can't find 3600 right now, and may need to go with 3600x, do you think that 95W 3600x at stock will work with Gigabyte B450M DS3H?
Should i config it with amd athlon 200ge
@@dkincorporated3060 It's gonna be perfect for an Athlon 200ge. Just remember that Athlons can only run Sata 3, so the M.2 drive would have to be SATA 3, if even used, not PCIE.
Christos Tube how do I do that? Do I used 2 different USBs?
I have this same Mobo with build in wifi and bt.
It is a perfect Mobo I haven't got any problem in 2 years.
It's a good little board 😊
I just ordered one with wifi from Mwave ( I’m in Australia) where did you order yours from and does the wifi work well or not
@@liamthomson7364 I bought it from India and the Wifi works perfectly.
I think it's better than aftermarket wifi adaptor.
Reminder: There is only 12v 4pin for your RGB header :3
Thanks for the insight. One year after buying my processor (Ryzen 7 1700x) and board (Asus Prime B350M-E) online I finished paying some emergency costs and was ready to finally build my PC. Turns out there is a problem with my board and I need to find a budget AM4, DDR4 board if I want to buy the rest of the parts this same month.
7:10 what could cooler is being used?
Zeo that’s a CoolerMaster Hyper 212
7:00 What's that huge Coolermaster metal box with the fan that's connected to the CPU. I've only seen basic fans on top of CPU's, is that huge metal box thing necessary for CPU cooling?
Yes its necessary. It's a heatsink which transfers heat from the cpu into the air to dissipate heat, thus keeping the cpu cooler.
Hey I was also wondering if I'll need a sound card for my build if I plan on making some music? Tomahawk B450 and Ryzen 5 2600x. Thanks mate!
If I was into music creation then yes, I would get a good sound card. The on-board sound is ok, but not professional.
@@TechnologyHive Thanks! I have many questions and you seem like the man to ask lol
Just Build My First PC using this board, with the R5 3600 clocked at 4.2GHz and running well, also using the 1650 Super, so plenty capable enough for me.
Plz tell me how to over clock Ryzen 5 3600
I have same motherboars you have 😭
@@bahaa976 through the bios, there are plenty of videos to show the best way to do it. However make sure you follow the tutorial and overclock at your own risk,l
@@AJBAdventures bro with r5 3600 he needs updade bios ? And how i do that ???
@@ΔιονύσηςΚασο the gigabyte b450m comes updated out the box now, no need to update the bios
what is the stable oc that you were able to get from this board?
4.1Ghz for the ryzen 5 2600?
thanks :)
You reached 4.1 ghz oc with this mobo?
I have my ryzen 2600 stable at 4.1ghz with this board, its cooled by a 240mm cooler master aio
@@kamel1710 I oced my 2600 to 4.1 GHz without any problems on this board: the vrms dont go over 70° in prime95 small ffs and the cpu is stable ( on only 1.23V, I may have a golden or silver chip). I even tried 4.2 GHz but the cpu got to 78°C in stress testing and IT was very unstable. The board handled it even so just fine. The vrm temps are very decent on mine, hope the board can hold me 2 years+ with OC.
I only could get my Ryzen 5 2600 to 3.9GHz on this MB. Anything higher than that and it gives black screen in any stress test(AIDA64, NFS Heat). Probably because I’m using the stock wraith stealth cooler. Aftermarket coolers seem like a hassle to fit and may even damage the mb so I am reluctant to give them a try.
@Angelo Luhmän Kartodirijo Highest would be 113c and I have seen even avg reaching up to 96c before black screen. Any suggestion on cooler or voltage? Currently 3.8GHz@1.296v.
Waiting delivery. thx for the video
Veturazi Games me too! Do you have a 3600 chip? How are you going to bios if so?
@@parishj3 Sorry man, but I'm just a poor guy! kkkkkkkk
Here in Brazil it costs a LOT of money, I was forced to go from 2700 not x, thinking about future overclocking. + 16gb 3000mhz.
I think it will make my 1080 flow better!
Is the sound card good on this card. I’ll play shooter so it’s just for Gaming and Netflix?
It is a generic Realtek Audio codec. Decent but not the best out there. Unless you're a music producer, you won't notice the difference.
This impressed me a lot. With a ryzen 3600 I'm running 2x8 cheap Crucial ram at 3733cl16 stable. Simple bios with a nice 'save preset' function.
do you ever overclock the cpu with this motherboard?
@@deeznuts9820 no, there is very little to gain by overclocking ryzen 3600 sovI don't bother, but there are plenty of good OC features in the bios :)
@@Taraquin83 did you need to update bios?
@@momomomo-wc6ne dunno which bios I ran, should it 2 years ago. Used the latest available bios then :)
WTA
Spec ..
b450m steel legend
Ryzen 5 2600x
2x8 gb 3200 ram
Aorus rx580 8gb
It it okay...
Perfect
Same spec
What about the case and CPU cooler?
GUYS IS THERE BLUTOOTH ON THIS BOARD? PLS ANSWER
SOME ONE ANSWER
I'm getting a weird issue whereby it wont boot to WIN10, when I tried an old WIN7 DVD the first setup screen would cause all USB to switch of, no power, no matter which USB I tried, I am using an old BIOS, but Ive no clue an this is the 2nd Gigabyte DS3H to do this, with the first killing a stick of 2400mhz RAM?
Update to newest bios.
@@TechnologyHive Thanks :)
@@TechnologyHive I did as you said, although the latest 40 BIOS wasnt recognised the 32 BIOS updated fine an I was able to install an boot, will order 2 sticks of 4 GB RAM an thats that I hope :)
TL:DR This worked, cheers pal :)
@@eponaalbion I'm glad to hear that!
Great video. Do you know what the Gigabyte logo shield is for?
I bought this one along with Ryzen 5 3600. It's really nice.
how are your temps?
Did u needed the bios update bro?
Francisco Paiva Apparently if you get it from amazon it comes with the bios updated to the latest version
@@FLAMEalan thx
@@depaiva195 No. The vendor has updated to me.
I got this motherboard with a GTX 1650 Super Graphics Card, Ryzen 5 1600 CPU, 500W Power Supply, 16GB RAM, and a 500GB SSD. Still waiting for all the parts in the mail. This is my first time building my own PC so I would appreciate some advice and tips
Will 3200mhz memory work?
check the specs for thr board on its website, it is listed on what will work or not there
Yeep, no more than that
Yup its work, i used this motherboard with tfore tuf delta 2x8gb 3200mhz and it works fine
I had to buy this motherboard as a replacement to my msi b350m Bazooka that I accidentally broke a capacitor and solder point over the vrm by trying to look around at the vrm heatsink. I am not disappointed at the motherboard as for the price, it allows me to use my system again. I was a little disappointed that it didn't have two sys fan headers, but that was an easy fix as my liquid cooler came with a fan splitter so I was able to add all my fans to it. I will explore overclocking my r7 1700 back to 3.8ghz. I don't need a massive overclock, just something to make the cpu work a little faster for android compilation and development. I miss my other motherboard though because it looked nicer and I got it for 45 dollars.
It is not the best top of the line board for sure. Some have even written bad reviews on it and complained it arrived doa. But my experience with it has been very positive for what I paid. No complains at all. Overall good little board to hold you up :)
my sentiments also.
Sir question, will the ice edge mini v2 will fit to this motherboard?
Yes
I overclocked my Ryzen 3 1200 from 3.1Ghz to 3.9Ghz with this board and it seems pretty stable.
What about VRM temps? I'm planning overclock my R5 3600 to 3.9 or 4.0ghz but im not sure for doing it because of this temps
@Dylan Roof Of course your MoBo can handle that card, why not? the problem is not the MotherBoard, is the CPU. What CPU you're planning to paring with?
@Dylan Roof you wont see any bottleneck with those components, they works pretty well together.
does this boot without bios update i want to get a ryzen 1600 amazon prompts me to pair this mother board.
Ryzen 5 1600 no bios update needed with this MB!
RetroHarden hey i’m building a budget pc (trying to stay under 250€) and i already know what gpu and mobo i’m going to buy, but i’m not sure about what cpu i should i buy. i’m considering the ryzen 5 1600 (which i found at 100€) or the ryzen 3 1200 (which i found at 35€... yeah). i’m planning to use this pc for composing music and do a little bit of gaming (full hd mid-low settings.. maybe?) sorry for the long message i’m new to pc building
I am considering this mobo in my next build so thanks!
i actually have it in my current build. but honestly only get this mb if youre looking for a budget build. if you want here is my build pcpartpicker.com/user/Valboys/saved/wf83t6
@@valboys3453 Why do you say that exactly? I'm limited to a micro-ATX due to my case size and I'm looking to move to AMD so I need a new board. Which do you recommend?
@@adamkeyes5406 I'm not the best to ask but this board function very well I've had no issues. But it also depends on what you're using it for. It only gas 2 fan headers and if you use a triple fan or even some double fans itll block some sata connections. If you have the money look for a better board, my favorite ones are Asus brand but they're more expensive.
@@valboys3453 idk about pc but can i use a ryzen 5 3600 with this ?
@@valboys3453 a 1050 with 2gb of VRAM! That card is a colossal piece of shit. Get an rx 570, better performance, double the VRAM and its way cheaper.
Hey man im building my second pc (first build by myself) and im not sure about my front panel connectors as in which pin they go on and am i able to test to see if it works without the cpu
Bottom left two pins are for HDD. Top left pins are for power Led. Top right pins right next to power led are for power switch. Bottom right are reset switch. Common pin set up on most boards.
@@TechnologyHive okay thankyou very much
Technology Hive THANK YOU SO MUCH! I am doing my first pc build and couldn’t find anything one where the wires go!
Can i buy 3000Mhz Ram on this motherboard and is this work ? Because this motherboard supports DDR4 3200(O.C.)/2933/2667/2400/2133 MHz ! Srry for my English
I have this Board. It's ok, but the positioning of the Sata Sockets is terrible. Then of course Gigabyte Software is largely just rubbish. i.e. the RGB Fusion but also the App center more often than not fail to update so you have to do it manually. The App center constantly tries to trick you into installing a large collection of 3rd party programs you may or may not want. All you have to do is uncheck them, but that becomes pretty annoying if you find you have to try multiple times to update something when the update keeps failing. I'm about to put a 3900X in it and I am a little concerned about the VRM's being able to deliver enough power during high load. Currently, have R5 2600 installed and have not had any problems with that, but I guess I will see when I put the R9 3900X in. I may possibly need to put little heat sinks on the VRM's/Fets
Im getting a r5 2600x and 1660 ti. Im planning on getting this case, and im wondering if it would perfectly fine for normal gaming/usage (no overclock)
It should work just fine. The 2600x will overclock itself just fine thanks to xfr. If you get this same case I'd go for a blower style card since the case does not have the best air flow options.
@@TechnologyHive Then another question for this assembly that the person wrote. Will this be all, and in particular, the processor work on RAM with a frequency of 2133 MHz, and will it be possible to overclock it?
@@Ty4KaNiCe I can not tell you for sure if the ram will overclock well. It depends mostly on chance of getting good ram that likes overclocking.
@@TechnologyHive and if I haven't money for new RAM? Should I try?
I have this Mobo and it sucks it only has one sys fan. I had to get a fan hub. Also I have a question.
Right now I'm building my own PC .
I have not installed the CPU or GPU yet.
But I did install RGB ram just to test it. My Mobo is connected to my power supply. But the RGB on my ram isn't turning on. It has nothing to do with the CPU and GPU. I don't understand :(
So this mobo can overclock R5 2600 to 4ghz easily?
I have the exact setup you're talking about and I can overclock mine to 4ghz easily
Looks like it. He says unstable at 4.2, stable at 4.1 and I recoon that is pretty solid, optimal oc
I oced my 2600 to 4.1 GHz without any problems on this board: the vrms dont go over 70° in prime95 small ffs and the cpu is stable ( on only 1.23V, I may have a golden or silver chip). I even tried 4.2 GHz but the cpu got to 78°C in stress testing and IT was very unstable. The board handled it even so just fine. The vrm temps are very decent on mine, hope the board can hold me 2 years+ with OC.
Also Lol at me I think Im the only person alive uusing a Hyper 212 evo *with the old, "incompatible" version* on a ryzen.
@@combatantezoteric2965 Man, VRM is the TMPIN4 in CPUID HWMonitor? Can you check it for me?
Can It Support Ram 3200Mhz .??
Will this motherboard be OK with a 300W power source? mainly will be used in a home file server storage case with 4 hdd's or ssd's
It will work perfectly fine. No worries.
I wouldn't recommend a 300w, because with your other parts a 400 or 450w will likely be sufficient
Install went fine. Not using a dedicated/gaming video card, and only regular 2 sata HDD's. but may add 2 SSD's. main drive is an M.2
@@Schweigardt my microphone doesn't seem to work with it.... Works on every other device... Any tips
@Fury The Epic without knowing your setup, sounds like you could have another device that might be stealing priority over the mic that's not working. Also the mic may be disabled in the bios? Worst case you could pick up a USB adapter that gives you a microphone port to bypass the issue
will it work with a ryzen 3 3200g? because I built my friend a pc part list but his dad completely ignored it and bought this motherboard. I recommended the b450m pro 4 because its ryzen 3000 ready
This thing has an almost identical VRM to the ASUS Strix F (exact same CPU mosfets) - the only difference is in the chokes, controller and graphics stages. This is ridiculously good for a board half the price (though ASUS motherboards are usually a total rip-off in general).
Don’t think you gave this board enough credit to be honest. Still a good review though.
Ryzen 7 3700X
G Skill Ripjaws 64gb 3200mhz RAM
Samsung 980 PRO 1tb SSD
Inland NVMe 1tb M.2
GTX 1080 FTW3 11GB
Asus ROG Ryoujin AIO.
EVGA SuperNOVA G2 750
This board handles all of that with ease.
It is a good board for the money no doubt. Glad it's working out for you 😊👍👍.
Hey man I have the same motherboard and cpu did you overclock it? If so can you help me out?
@@gvtpro2201 you can't overclock 3rd gen ryzen cpus with this chipset.
Please do a oc guide for this motherboard
He literally said you can't oc dumbass
@@Bryan-ix7ue he shows it in the video. There aren't extra features for overclocking, but you can still do it. So not only are you wrong, you're an asshole.
Greetings..Does this board needs bios update or it's ready to go out of the box. i have 9TH gen i3 9100 cpu,Do you have any other suggestions for little bit higher quality. board ?thanks
This motherboard is not compatible with Intel CPUs.
I got this new from Amazon , faulty sent it back might get the same one again..
Edit: I got msi b450m mortar max
What was wrong with yours? I bought one and built a system with it, and when i tried to power it on it turned on for a second and powered back off. I returned it but got the same one and have the same problem, trying to replace my power supply now
well that's only double the price so you'd expect it to be better lol
Hey man thanks for the review first and Is over clocking a very important thing ? I’m panning to get Ryzen 5 2600, rtx 2060 and 16gb 3000mhz ram on this motherboard and I don’t want my build to be limited because of one part but this is very affordable so what do you say
I say you wait a few more months for Ryzen 2. But if you must build it today, this board with fast ram will suffice. Overclocking is not a must have. But it is a nice option to have. This little board is plenty.
ryzen 2600 on rtx 2060 wow bit overkill gpu for that cpu
im getting same cpu with rx 580
@@madoiscool If you pair the R5 2600 with fast memory, and you overclock that cpu, it will push the RTX 2060 to its limit. Especially at 1440 resolution. BTW the RX580 is a nice card.
@@TechnologyHive thanks
MaDoTPG I decided to get an rx 580 too, and upgrade it later
Can I overclock with a r5 1600? and gtx 1650
Yes you can 😁
@@FARE5252 It should work out of the box with current Gen Ryzen cpus.
i don’t know if you’re checking comments on this video still, but does it support ddr4-3600 ram?
can this support mild overclocking of Ryzen 5 3400g's Vega 11 GPU? say from 1450 to 1600 Mhz
I have the built in wifi version of this board, and mine didn't come with an m.2 standoff. I had to screw the m.2 directly into the motherboard, which is almost certainly wrong. Is the board supposed to come with a standoff, or did I just lose it?
It does come with a stand off. 👍
@@TechnologyHive If I need to buy a standoff, is there a specific size that will fit?
@@luciuswomack4337 My best guess would be ebay. Or you can try amazon.
Will this work with Ryzen 5 2600 and GTX 1060 6GB??
Yes it will.
Technology Hive ive got this mobo and installed a ryzen 5 2600 and it has no post
Been using this Mobo for about a year, Not had a single issue with it!
What fans do you have
Will it be compatible with new ryzen gen?
Yes
Is this better or b550m better difference in price in my country is 100 aed (roughly 27$)
Strange... I have this Exact Board and I see 4.2 GHz on the regular from my 2600x and you don't need an all core Overclock for Ryzen... XFR does that just fine, though I did get 4.2 GHz Stable... My Ram is at a stable 3000 MHz and could hold 3200 MHz but there is little improvement... My CPU Idle is 30c and my max load is 68c. My Zotac GTX 1070 Mini hits 1960 MHz boost and fluffs at 65c the most I have seen the Vrms and Mosfet at was 52c... Hell the only Cons I have found is the Position of the Sata, the x4 slot and poor Positioning of the Case Fan Header, also if you populate the M.2 Nvme you lose one Sata Port Ironically the one that is in the worst position if one has a Long GPU. But that was something I was aware of... As they Share the PCIE Lane... For a Budget Board it will do just fine until B650 is a thing. I have seen much worse...
Hey, i have the same board but how do i change the led strip color? It just stays on orange.
@@user-cc2fm4vu2x Look around in the bios for Power LED I think it's in there but I recall seeing it. I didn't bother changing that cause Orange suited the Zotac 1070 I have and my friend had a spare prism cooler so I made that Orange as well...
@@user-cc2fm4vu2x Right well I had a dig thru the Bios and I have concluded that the Boards Little Strip will only ever be Orange or Off though you can connect an LED Strip and Address the Color Course I am fine with the Orange.
@@Zacarriss yeah, same and a shame.
@@user-cc2fm4vu2x Well at least everything else is fine. I was not looking for anything crazy just functional overall and several parts are second hand got the 1070 for $185 cleaned up real nice.
just got this mobo. waiting for the other parts
@Dylan Roof yes it is
U use intel or amd?
Veselin Milenov what???? that's amd for sure
That's definitely amd lol
what an idiot haha
he's using nvidia processor
I built a new PC last weekend including this motherboard, Gigabyte B450M DS3H vF50. The problem is NO function keys during startup screen before I access the BIOS Setup program, press the key during the POST. Please help me with a fix.
Thanks.
People have been saying that the boards have been dying on them. Did that ever happen to this one, and is there a way to prevent it?
I haven't had any issues with it. It works 24-7
@@TechnologyHive do you think I can use the turbo settings for the intel i5? Because some people are saying it killed their boards, and even using more than one core can be enough to destroy it. On top of that, others were saying it killed their ram and monitors, is that even possible?
This work with ryzen 5 2600? And i can overclock with that??
I bought this bought yesterday, I don't know why I can not change the muiltiplier, click on this field but no happen, no popup show
like the begining of a youtuber's video: ruclips.net/video/ceKOJQmOhAc/видео.html
update: I can change the OC setting by pressing page up/down, my fault @@
@@huuloc12 look man with most amd boards or chip , you can overclock. This isn't intel.
Go for it...won't disappoint u..I ahev r5 3500 and gtx 1650 super
R5 on this lga 1151 board?:)))
can this stream?
You have to tell the cpu first...
is this board ok for my Ryzen 7 PRO 1700x? I'm not planning to OC, even the ram will run on its stock speeds, I'm only gaming and nothing else. Will my VRM temps be an issue?
Can someone recommend me cheap mobo with good OC capabilities for a Ryzen 1000 series?
MEGA I recommend msi b350m gaming pro
the one that is shown in this video is good for overclocking, I overclocked my r5 1600x to 4.1, and my ram from 2400 to 3200, works fine.
Which is better? This Gigabyte B450M DS3H or MSI B450M PRO VDH MAX?
Is this great with ryzen 5 2600 and rx 570 4g and can you overclock it?
Yes, it is a good combination. You will be able to overclock the CPU, yes.
@@TechnologyHive thanks for the fast reply!! Appreciate it!
Technology Hive And how about a RX 580 8gb ? With the same 5 2600 processor. Thanks!
Is the nvme ssd not working if are using ryzen series? Is that true?
Is it compatible in 3000mhz ram?
yep
hi i have this mobo and a ryzen 5 2600 just like you, I got it just this month. I tried XMP on this to get 3200hz on my ram but games keep crashing. howd you do it, i mean how did you max 3200hz on ram? btw i have 8x2 16gb ram hyper x fury, if that matters. thanks, i hope you reply
How rgb works on it?
no rgb
I buyed this socket,is very good,single problem of mine is ,to little and vga with his cooler,practicaly deny another slot for audio card or card for internet.
Hello with this motherboard, I can put 3gb of vram video in a 2400g vega 11
You can only use 2gb of VRAM for the Vega 11 on any motherboard.