Drone Accessories and Preparation - 00:00:00: Take out the product accessories in sequence and check if they are complete according to the product accessories list. - 00:00:00: Unfold the drone base and install the drone battery. - 00:00:00: Place the drone on a level surface and press and hold the switch for three seconds to turn on the drone. Remote Control Connection and Calibration - 00:00:30: Turn on the remote control switch. After turning on, the lights of the remote control and the drone will automatically flash for comparison. - 00:00:30: After the comparison is successful, press the gyroscope calibration button on the remote control. The drone flashing light will turn to a constant light, indicating that the gyroscope calibration is successful. - 00:00:30: Press the unlock button, the drone motor will unlock, press again and the motor will stop rotating. Basic Flight Operations - 00:00:30: Use the remote control to control the drone to take off, ascend, descend, rotate left, rotate right, move forward, backward, fly left, and fly right. - 00:01:00: The default gear after power-on is low-speed gear, accompanied by a beep; press and hold to hear two beeps for medium-speed gear; press and hold to hear three beeps for high-speed gear. Advanced Features - 00:01:00: Turn on the drone obstacle avoidance function, the drone will enable omnidirectional obstacle avoidance. - 00:01:30: Press the drone 360-degree roll button, and then toggle the right joystick, the drone can achieve a 360-degree roll. - 00:01:30: Press the one-key landing button, the drone will automatically descend and land. Mobile APP Connection and Use - 00:01:30: Scan the QR code on the manual, download and install the corresponding mobile app. - 00:02:00: Turn on the phone's WiFi and connect to the signal sent by the drone. - 00:02:00: After the WiFi connection is successful, open the drone APP, unfold the phone holder and put on the phone, then you can start flying. Replacement and Charging - 00:02:00: When replacing the fan blades, pay attention to distinguish between A/B fan blades and tighten the screws. - 00:02:00: When connecting the battery for charging, the red light will be on; after the battery is fully charged, the red light will go out. i used whisper and gemini
Drone Accessories and Preparation
- 00:00:00: Take out the product accessories in sequence and check if they are complete according to the product accessories list.
- 00:00:00: Unfold the drone base and install the drone battery.
- 00:00:00: Place the drone on a level surface and press and hold the switch for three seconds to turn on the drone.
Remote Control Connection and Calibration
- 00:00:30: Turn on the remote control switch. After turning on, the lights of the remote control and the drone will automatically flash for comparison.
- 00:00:30: After the comparison is successful, press the gyroscope calibration button on the remote control. The drone flashing light will turn to a constant light, indicating that the gyroscope calibration is successful.
- 00:00:30: Press the unlock button, the drone motor will unlock, press again and the motor will stop rotating.
Basic Flight Operations
- 00:00:30: Use the remote control to control the drone to take off, ascend, descend, rotate left, rotate right, move forward, backward, fly left, and fly right.
- 00:01:00: The default gear after power-on is low-speed gear, accompanied by a beep; press and hold to hear two beeps for medium-speed gear; press and hold to hear three beeps for high-speed gear.
Advanced Features
- 00:01:00: Turn on the drone obstacle avoidance function, the drone will enable omnidirectional obstacle avoidance.
- 00:01:30: Press the drone 360-degree roll button, and then toggle the right joystick, the drone can achieve a 360-degree roll.
- 00:01:30: Press the one-key landing button, the drone will automatically descend and land.
Mobile APP Connection and Use
- 00:01:30: Scan the QR code on the manual, download and install the corresponding mobile app.
- 00:02:00: Turn on the phone's WiFi and connect to the signal sent by the drone.
- 00:02:00: After the WiFi connection is successful, open the drone APP, unfold the phone holder and put on the phone, then you can start flying.
Replacement and Charging
- 00:02:00: When replacing the fan blades, pay attention to distinguish between A/B fan blades and tighten the screws.
- 00:02:00: When connecting the battery for charging, the red light will be on; after the battery is fully charged, the red light will go out.
i used whisper and gemini
Drone nya mati sendiri, penyebabnya apa ya