Sweeeet! Yeah if you have the dual flash on a single battery, the controller will pull too much power for one battery to handle. You can always ride a different flash with a few seconds in the Kilowatt app, if you’re reconfiguring your bike back and forth 🤘 thank you for the video!
Thank you so much for the discount shout out! From my experience when I had my "pre upgraded" stock battery, I also had a cutout issue. But once I fixed it and got a second battery, I didn't have anymore cut off issues. So as long as youre running the controller with both batteries, you should be good! Also I switched my display from showing battery percentage to volts. I found that reading the voltage is more accurate than percent.
One of the biggest advantages of the Handlworks controller is it allows you to use aftermarket batteries, up to 72v ones even, and that allows you to hit around 50mph
The biggest downside is the torque sucks. Great for top speed and flats. There is still some issues though regarding the tunes and flashes. It's ok but torque from the bac 855 vs the stock rx controller is really poor.
Sweeeet! Yeah if you have the dual flash on a single battery, the controller will pull too much power for one battery to handle. You can always ride a different flash with a few seconds in the Kilowatt app, if you’re reconfiguring your bike back and forth 🤘 thank you for the video!
Thanks for the info! Pinned for anyone else that has the same quesiton.
Stock up 👍🔥
Thank you so much for the discount shout out! From my experience when I had my "pre upgraded" stock battery, I also had a cutout issue. But once I fixed it and got a second battery, I didn't have anymore cut off issues. So as long as youre running the controller with both batteries, you should be good! Also I switched my display from showing battery percentage to volts. I found that reading the voltage is more accurate than percent.
Good point. I will have to play around with the display some more. I hope people buy through you link! You put in the work.
How do you set the display to show the voltage?
I thought about doing this but I’ve found losing a bunch of weight has really helped the fun factor for me with the stock S2.
Congrats! I need to do that
One of the biggest advantages of the Handlworks controller is it allows you to use aftermarket batteries, up to 72v ones even, and that allows you to hit around 50mph
Good point. That would be wild on a Super73.
i need to do this on a build.
It’s a fun little experiment.
I am probably going to get one of these and a chi ranger for my rx Mojave, did that splitter cable come with it or did you have to buy it separately?
It comes with the CBS Ranger. Be sure to use my discount when you do!
do u have a aftermarket crown?
The controller vibrates when you press buttons on the display?? That’s gotta feel weird lol, but I guess it’s cool.
Haha, yeah, it’s slight. You only really feel it when you’re at a standstill.
The biggest downside is the torque sucks. Great for top speed and flats. There is still some issues though regarding the tunes and flashes. It's ok but torque from the bac 855 vs the stock rx controller is really poor.
Yeah, it would be nice to get a little more off the line, but it’s nice to hit those higher top speeds.
My super73 last about 6 months and the battery's toast
The bac2000 would of gave way more power