I’m finally caught up on all your videos! Thank you so much for all this content. All I want to do is get out in my garage and turn wrenches, but I’m too sick with cancer to be doing any of that. Honestly your videos and content help me out a lot, and help to keep my drive going. Can’t wait to be back out there!
This looks sick for sure great job thank you for the ideas for my 1:14 scale RC tractor trailer build I’m going to look into doing the air drop on my build thanks great video keep them rolling
Your videos are always top notch. But this one really stands out as one of the best. Dig the still shots of the Pete in front of the brick building!!!!
Bro I say this all the time you know how to build and make sick trucks but dude the Pete with the tint is just superb 👌👍 lol nothing like all blacked out rigs
Gregg , Love your build so far. love watching your vids. I bought my 99 379 back in 2013 for 25 grand. Have pumped 80Grand into it , and still nicer than a new one. Also Black but with the standup 73 inch walk-in. Did the floors myself with laminate flooring. Keep up the Build.
Pete is looking SICK!!!! Little more seat time and you’ll have it mastered, when your shifting and not hauling anything try skipping some gears that way you don’t have to shift so much, but sick build so far
I agree. I usually start empty 1st gear the u shape to third. Empty mind you. Then go to high range the same way. Then pickup overdrive. So I only shift 4 times. That’s how I was taught from my Dad that’s been at this for over 40 years in the biz. Great looking truck!
Just a couple tweaks for me if it were mine but this truck is sick. Just enough chrome. LOVE the paint matched roof lights and clear lenses all around. Slightly shorter miter cut stacks and single round headlights for me. Regardless it's perfect as it is. The attention to detail makes it for sure.
@@83Yankee uuum why my personal opinion on my truck is because I like the lo look better...secondly 22.5 bring better fuel economy they need less power to turn ...thats all
Now it just needs to be stretched with low low air leaf and double hump fenders with a deck plate and front and rear T bars. I just don’t know how people drive with the steering wheel straight up and down sitting on the floor and the shifter at your head 😂
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Why wouldn’t you have the switch set so up is above ride height, middle is ridge height, and down is dump? Seems odd that the middle is dump
Didn’t think I could love the Pete anymore than I already did! That is one bad truck!
Need some titanium drag blocks for the front bumper to let the sparks fly. That would be a killer pic
Looks real good! But I feel like you need a lot more seat time before you think of stretching it lol especially after tinting the windows
Looks fantastic. Love those pass-throughs with the stainless lines. The smoked headlights look great too. Clean e39 M5 on m-pars as well. 👍😉
The m5 is my fav 😍
Looks great! Those rollers in the mountains it looked so good!
I want that black kw just needs airride like yours
One bad ass pete there great job everyone that worked on it KEEP ON TRUCKING
Yes sir.. looks right for sure.. great job
It looks good. On the bright side now you can plow snow around the shop and homestead.
Looks sweet now we need the trailer to complete the setup
I'm definitely feeling the whole set up. And can be a work truck too. Pride & joy there. 🔨⬇️
That thing is looking bad! Dam 😍👍👍
Ol’ Petercar looks good but damn that KW sure looks sexy AF.
I’m finally caught up on all your videos! Thank you so much for all this content. All I want to do is get out in my garage and turn wrenches, but I’m too sick with cancer to be doing any of that. Honestly your videos and content help me out a lot, and help to keep my drive going. Can’t wait to be back out there!
What's the brand of the air rode kit?
This looks sick for sure great job thank you for the ideas for my 1:14 scale RC tractor trailer build I’m going to look into doing the air drop on my build thanks great video keep them rolling
Was kinda hoping to see it go down to Fitzgerald but it is what it is....looking pretty sharp these guys did a great job
Got a certified Pete snow plow now lol
Your videos are always top notch. But this one really stands out as one of the best. Dig the still shots of the Pete in front of the brick building!!!!
Luks great...love it👍👍...time to do the interior
Bro I say this all the time you know how to build and make sick trucks but dude the Pete with the tint is just superb 👌👍 lol nothing like all blacked out rigs
The Pete slaps! Love the painted windows too!
came out amazing Greg. Great job to all the guy's at Dirty
Outstanding Greg ! Top on RUclips 👍🏻👍🏻
Looks good bout time to turn it into a toter-home
best part of this video......finally got rid of that mismatched headlight.
That has bothered me since he picked this rig up... 🤣
With that KW next to it. Omgness 🔨⬇️🗜💪🏿🏋🏿📸
That is sick!!!
Pete looks awesome
Now you need the front fenders that have the 3inch outside lip to tuck the tires behind to make it look even lower
Content is stepping up. Amazing truck amazing video quality.
She’s come a long way👍
Gregg , Love your build so far. love watching your vids. I bought my 99 379 back in 2013 for 25 grand. Have pumped 80Grand into it , and still nicer than a new one. Also Black but with the standup 73 inch walk-in. Did the floors myself with laminate flooring. Keep up the Build.
The old Pete is definitely coming together! Looks great! 👌
Looking good what is the brand of headlights?
Came out awesome Greg. You will love the ride. The best riding trucks i drove are the ones with front air ride
The pete looks so good! I remember when you got it with the original sleeper what a transformation! Congrats Greg
Now that’s a bad ass rig 😍 I think she needs a frame stretch next
Awesome job! Even the little details look good
Pete is looking SICK!!!! Little more seat time and you’ll have it mastered, when your shifting and not hauling anything try skipping some gears that way you don’t have to shift so much, but sick build so far
I agree. I usually start empty 1st gear the u shape to third. Empty mind you. Then go to high range the same way. Then pickup overdrive. So I only shift 4 times. That’s how I was taught from my Dad that’s been at this for over 40 years in the biz. Great looking truck!
looks freaking bad ass
i do hope you park your truck better this time Don't let them steal it again, but i do remember it never look so good before its awesome 💖
That is a bad ass truck!
Just a couple tweaks for me if it were mine but this truck is sick. Just enough chrome. LOVE the paint matched roof lights and clear lenses all around. Slightly shorter miter cut stacks and single round headlights for me. Regardless it's perfect as it is. The attention to detail makes it for sure.
Is the rear suspension integrated into that switch as well or no? If not you should itd like even better if the entire suspension dumped together
Is sure mean looking going down the road it's a beautiful truck
Absolutely beautiful😍😍
Greg need to get that chrome repolished and then paint corrected and ceramic coated and make that thing shine and also repaint the frame
Looks incredible man! Now make sure to bring the rig to St Ignace truck show this year!!
On OCD tells me to put that switch so that ride height is the middle position, dump is down, overinflated is up.
Looks great 👍
What’s the total cost to do the front end like that?
with the kit and everything..you are looking at 4 to 5k usd
Freaking SICK!!! I love this build process. But curious on your wheel and tire combo to come
Love the new looks
Hell yeah, the reveal!
Thats great for your cold motor. Rev and grab the engine break. Lol keep doing it!
Looks good man. Craftsmanship of that kit looks top notch. Motor work to come on the Pete? Keep up the great work
Truck looks real sexy now Greg lot better now then when you first got her keep up the work on it
Great looking truck great job on air system you should tie in rear air bags so the whole truck sits on the ground.
looks bad ass, it needs 24.5’s on the front🔥🙏🏼
No
@@colinlchilly6249 , why? The 24.5’s are very common on tractor trailers and don’t degrade anything at all in terms of working the truck.
@@83Yankee uuum why my personal opinion on my truck is because I like the lo look better...secondly 22.5 bring better fuel economy they need less power to turn ...thats all
@@83Yankee the bigger the tire the harder to pull right
So a bit better torque conversion
the truck looks awesome Greg!
Greg how close does that oil pan sit from the axle when aired out
Sweet Ride
Now it's time to full air ride the dually!!!
nice, clean work!
Cool Ride
Bring it to Mayberry Truck Show in Mt Airy NC September 30-October 1
Truck is looking outstanding, nice build 👍👍
The tint, headlights and air ride front end gave it a whole different look, now to get it to smoke more 🤔
Absolutely a beautiful truck.
Dam!!!! Id love to take my 386 to them!!💯💯
Even comes on bad ass. Crushing cans lol 🔨⬇️
Greg’s gonna be pushing snow with the pete😂
“Oh and by the way guys The Peterbuilt Fucks” 🤣🤣
Greg please put links to the music you include in your videos they are that good!
Shout out to Daw for the roller shots, its cold as f..... out this way. Truck looks sick
What height valves do you use for the over inflate
I love the set up y’all did. I have a question what size bumper y’all put on. 20” or 22”?
Dawson with these sick angles! Videos are turning out 🔥🔥🔥
Would love to find out more about the leveling valve ..would you mind sharing the part number?
It’s a very commonly available part
@@joshdirtydiesels3462 been meaning to call you to get a price and avail on a wide track car hauler axle..
Love the process👍😎
Love to see it
So is the Pete going to be your new snow plow?
Looks sick nice build!
Stretching and slammin the rear 👌🏼👌🏼
Where can I get those stainless lines to the chamber
I really like all your builds , when are you going to get back on the pro street diesel truck. Keep up the great work
Can you make it so the rear airs out too?
Looks great! Can't wait to see it at UCC and see the change from last year! 🤘🤘
We're can I get that kit
Looks Amazing 💯💪🏾💪🏾
Now all you need is to get the low air rear suspension put in. Overall you have done a great job with the pete.
Pete is too 🔥🔥
It’s a dream to own one day! 🤞
Looks so good!! Do they sell the air bag plates, air valves and air switch? And what are the part #'s for the leafs and air bags??
Dawson is a genius with the visuals …. I fucks with it all the way up to 1:37 🔥🔥🔥… it’s definitely heat for the streets😏😏😏
Why the automatic transmission control on the dash??
Didn’t you have a steedspeed exhaust manifold for Pete and then the marine cam for it?
Now it just needs to be stretched with low low air leaf and double hump fenders with a deck plate and front and rear T bars. I just don’t know how people drive with the steering wheel straight up and down sitting on the floor and the shifter at your head 😂
Semi casual for front bumper? Bruce Wilson may have given it away? lol trucks badass Greg
Greg’s videos are so much better when he’s in jersey and pa