Love the ess duel. have them in 3 of my crawlers...i plugged mine into a laptop and extended the tickover to 10 seconds..so it doesn't cut off so fast..some cool horns on there too 👍 have a nice day.
Big up 🤜🤛 Cool video. I like the new toy very much. Less than £200 is a good price. Sounds great too. Always amazed at how much work goes in to getting these bad boys up to mustard. I am so used to watching work done on actual vehicles that seeing you work on them looks like a giant working on the suspension 😂 Hope ya well. Watched all the way through. A great job
Lol 😂 to a certain extent the mechanics are the same . Totally agree under £200 it's a good price considering the original is around £550 / £600 without any upgrades . Have a good day 👍
ow man...that they made already those badass upgrades....looks super good!by seen a couple of quick vids it runs smooth! def a keeper!thanks for sharing mate👌🏻💪🏻👊🏻💥its still stupid fast for a crawler😂😂i like that!!
@@TheAmerican1963 they are definitely a great RC!! I have two of them now 😃. It's quite easy to do that just remove the gear box from the car split the gear box by removing the screws be gentle not to lose any gears out of place with a grease gun or something like that and put some grease in there
Thanks Mike really appreciate it ! Yes I'm definitely happy with it so far 😀 I have now installed a more suitable motor with more torque and less speed 😁. Have a good day 👍
tell me when you replaced the outer covers on the portal axles with brass ones, did you install the original gears from this model inside or replaced them with injora or trx gears
@@Fonzierc and the last question now with all the coupons I can buy 1001 for $140 and 1011 for $185, what do you recommend, is there any point in differentials and an additional LED roof bar?
MANN!! been searching for a video to confirm these brass upgrades for the longest while! Thank you! Did the brass parts fit well or were any adjustments/mods needed?
@@medialinx767 thanks for checking in much appreciated by yes the brass parts do fit ok but they need some minor changes to actually work well they aren't well manufactured there's some floss but it can fixed with a drimmel
Hi! What a great video thanks! Is the injora motor better for very slow crawling? Does it have more torque? What real world differences did you noticed?
@@ethaneriksson6247 thanks for checking i Much appreciated. Yes it's definitely a lot slower in fact I actually found it too slow so I changed it back to stock until I changed it again to the Fusion pro
@ what a fast reply, thanks man! I was also considering the fusion package and was debating between fusion se 1800kv and fusion pro, seems I am going your route and I will save for the fusion pro
@ethaneriksson6247 absolutely the others are good but honestly the pro version is just another ball game . So much diversity. I got a couple of them now and a pro mini 16 to try it also . I bought mine from AliExpress it's definitely worth the wait just over one week to the UK
Hi thank you so much for the kind words !! Sorry it's not for sale . However I have updated on the description with all the links for all the parts and RC that I'm using !!
Thank you I'll can't say that 100% but it should do as it's a clone and the upgrades I have used so far they are being sold as trx4 parts and they do fit absolutely fine 👍
@@konradlindblad7860 hi all the part's I have used are listed on the description they are available on AliExpress . Thanks for checking in much appreciated 👍🏼. However you might need to modify it a little bit to make it work they are not very well manufactured !! This kit is actually better and cheaper but still needs a little mod if is to be used on the HB TOYS R1011 like mine . a.aliexpress.com/_EQ2EHkV
question now with all the coupons I can buy 1001 for $140 and 1011 for $185, what do you recommend, is there any point in differentials and an additional LED roof bar?
It isn't just the led lights it's also locking and unlocking front and rear difs I much better body IMO better Clarence on the wheel arches / fenders because of the New body style I'm yes definitely the R1011 and that's why I have chosen it over the previous one
@@Fonzierc Ok TQ, but i have a problem with the 9imod 55kg servo, when I turn the steering wheel to the left, the servo turns to the right, do you know how to fix it?.
Not quite there even with all the upgrades it's still way cheaper than the real thing in stock form the trx4 plus the upgrades would be around £800 while this with all the upgrades still less than half of that I do understand what you saying about the quality but to be honest with you this is actually decent not as bad as you might think I have had the trx4 with me do do some work and honestly I don't see £600 worth of RC in it . Thanks for the comment and thanks for checking it out it's appreciated 👍
Awesome car and great updates. HB doese aweome models. Thanks for the preentation Fonzie
Thanks Dirk much appreciated
It wasn't until I seen your video's on the video v1 that made me look further into it
Love the ess duel. have them in 3 of my crawlers...i plugged mine into a laptop and extended the tickover to 10 seconds..so it doesn't cut off so fast..some cool horns on there too 👍 have a nice day.
I can see why 🤣 they sound really good .
Thanks for checking in .
I will try that Also 👍 have a good day.
Awesome bit of kit, thanks for bring it down the track, the sound module is really good.
Thanks Phil much appreciated 👍
I'm sure we are going to see a lot more of this down there when we get the crawler course going
Big up 🤜🤛 Cool video. I like the new toy very much. Less than £200 is a good price. Sounds great too. Always amazed at how much work goes in to getting these bad boys up to mustard. I am so used to watching work done on actual vehicles that seeing you work on them looks like a giant working on the suspension 😂
Hope ya well. Watched all the way through. A great job
Lol 😂 to a certain extent the mechanics are the same .
Totally agree under £200 it's a good price considering the original is around £550 / £600 without any upgrades .
Have a good day 👍
ow man...that they made already those badass upgrades....looks super good!by seen a couple of quick vids it runs smooth! def a keeper!thanks for sharing mate👌🏻💪🏻👊🏻💥its still stupid fast for a crawler😂😂i like that!!
Thanks brother much appreciated yes it was really fast 🤣 .the upgrades are available as it's a trx4 clone so all the parts are exchangeble .
Very nice jeep, must be very good with the metal upgrades
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
Thanks buddy 👊 yes definitely a good crawler
That looks really good Fonzie
Thanks Brent 🙂
It is pretty good 😈💯 apart from the things I pointed out out of the box it's definitely decent for what you pay
Very nice mate, look forward to running a rig alongside that 👍🏻
Absolutely mate 😀 fingers crossed it will be dry next week 💪
@@Fonzierc can't wait 👍🏻
@@BradypatRC do bring something small for the home crawler course 😉😁
@@Fonzierc I'll bring them all 😂😂
@@BradypatRC lol 🤣
Is it possible for you to do a video on how to grease the gear box??? Great video and I have both the Bronco and the Jeep. Love both of them !!!!!
@@TheAmerican1963 they are definitely a great RC!! I have two of them now 😃.
It's quite easy to do that just remove the gear box from the car split the gear box by removing the screws be gentle not to lose any gears out of place with a grease gun or something like that and put some grease in there
@@Fonzierc Thank you !!! I really appreciate what you do !!! Great videos !!! 🙂
@@TheAmerican1963 you are welcome thanks for checking in
The Beluga 2.0!!!
Looking cool!
Bice up-grades and Info Share my Friend 🎉
Obrigado amigo pêla visita 👊😈
De nada Amigo ❤!
Forte Abraço 🎉
Nicely build!👍
Thank you
Super cool Crawler my friend 👍👌
Obrigado amigo !!
BOM Domingo 👊😎
Cool build bro looks and crawls awesome! Sounds nice too lol! Slow down bro! 😂👍🏼
Thanks Mike really appreciate it !
Yes I'm definitely happy with it so far 😀
I have now installed a more suitable motor with more torque and less speed 😁.
Have a good day 👍
@@Fonzierc Nice! Enjoy bro! 🙏🏼🙌🏼
tell me when you replaced the outer covers on the portal axles with brass ones, did you install the original gears from this model inside or replaced them with injora or trx gears
I'm running stock gears
@@Fonzierc and the last question now with all the coupons I can buy 1001 for $140 and 1011 for $185, what do you recommend, is there any point in differentials and an additional LED roof bar?
MANN!! been searching for a video to confirm these brass upgrades for the longest while! Thank you!
Did the brass parts fit well or were any adjustments/mods needed?
@@medialinx767 thanks for checking in much appreciated by yes the brass parts do fit ok but they need some minor changes to actually work well they aren't well manufactured there's some floss but it can fixed with a drimmel
Hi! What a great video thanks! Is the injora motor better for very slow crawling? Does it have more torque? What real world differences did you noticed?
@@ethaneriksson6247 thanks for checking i
Much appreciated.
Yes it's definitely a lot slower in fact I actually found it too slow so I changed it back to stock until I changed it again to the Fusion pro
@ what a fast reply, thanks man! I was also considering the fusion package and was debating between fusion se 1800kv and fusion pro, seems I am going your route and I will save for the fusion pro
@ethaneriksson6247 absolutely the others are good but honestly the pro version is just another ball game .
So much diversity.
I got a couple of them now and a pro mini 16 to try it also .
I bought mine from AliExpress it's definitely worth the wait just over one week to the UK
That is sweet! As always your upgrades just make it !
Thanks for checking in much appreciated yes with a little TLC Makes a big difference 😁
awsome build i am intrested if you want to sell it.. if not can you please share links to the upgrades. definite want to own one
Hi thank you so much for the kind words !!
Sorry it's not for sale .
However I have updated on the description with all the links for all the parts and RC that I'm using !!
awsome trail man and great rig. cool👍🤟
got a new subs👌😃
@@RubenVieira-EXKRC thank you very much appreciated your support and commitment
Maquina porreirinha para o preço 💪😉✅️
Bom video companheiro👌😁
Obrigado amigo um abraço.
Bem verdade muito BOM para o preço r agora esta ainfa mais barato
Awesome still waiting on mines been about 3weeks 😅
Very nice it's a great rc just remembered that you have to check the fluids and lubricant
Very good upgrade
@@irawanhobby529 thanks
Great build! Does a trx4 axle fit in there?
Thank you I'll can't say that 100% but it should do as it's a clone and the upgrades I have used so far they are being sold as trx4 parts and they do fit absolutely fine 👍
@@Fonzierc thanks bro. That helped me alot.
@@shadowx5648 no worries hopefully everything is exchangeble
@@Fonzierc im in thr middle of buying a trx4 or that clone and use the extra money for upgrades. So thats a big help for me
@@shadowx5648 I have just ordered another one yesterday but different colour they're on sale at the moment but ends today
Looks like an awesome rig. And a way better price than the TRX4
Thank you so much I really appreciate it .
Yes definitely I think the original is way over priced
Nice vidéo and vers good hb
Thank you very much really appreciate it 😊
top build Fonize your choice of upgrades are👌
Thanks Paul much appreciated ☺️ shame that we had to cancel the outing with it 😔
link for upgrades pls
It's on the description 😊
@ thanks battery recommendations pls?
What brass portal hubs are those? Where did you get them?
@@konradlindblad7860 hi all the part's I have used are listed on the description they are available on AliExpress .
Thanks for checking in much appreciated 👍🏼.
However you might need to modify it a little bit to make it work they are not very well manufactured !!
This kit is actually better and cheaper but still needs a little mod if is to be used on the HB TOYS R1011 like mine .
a.aliexpress.com/_EQ2EHkV
nice video💯💯
Thanks for the visit
cầu này có dùng chung đồ vs trx4 ko ạ ❤❤
Yes it's a clone under the body
question now with all the coupons I can buy 1001 for $140 and 1011 for $185, what do you recommend, is there any point in differentials and an additional LED roof bar?
It isn't just the led lights it's also locking and unlocking front and rear difs I much better body IMO better Clarence on the wheel arches / fenders because of the New body style I'm yes definitely the R1011 and that's why I have chosen it over the previous one
Looks sweet
Thanks José 😁 much appreciated your support always
battery recommendations pls
@@crispaullopez8037 I use a range of batteries 2s and 3s overlander,zeee , anything will be okay
Hello bro, what battery brand you use for this R1011? And 2S or 3s?
@@wanmuhammadfaidil5601 hi I normally use 3s batteries 50c from overlander or genace 3s 60c.
But I have upgraded the esc
@@Fonzierc Ok TQ, but i have a problem with the 9imod 55kg servo, when I turn the steering wheel to the left, the servo turns to the right, do you know how to fix it?.
@@wanmuhammadfaidil5601 reverse the steering on the controller there is a switch
@@Fonzierc Yes, I did, but the signal was having problems. When the tire turns to the right, signal to the left 😄😅
@@wanmuhammadfaidil5601 unplug the connections and replug like left on the right and the right to the left
what is the difference between 12T 21T, 29T, 35T and 55T on injora 550?
@@crispaullopez8037 the more turns the more slower it is but it has more torque/the Les turns the faster it is but less torque
@ thanks which one u recommend?
@crispaullopez8037 35 is a good option
@ may i ask which messenger site i can message u? jus need some advice😅
@crispaullopez8037 Instagram tiktok Facebook ( same name)as here
By the time you did all your upgrades you my as well just get a trx-4 no where near the quality
Not quite there even with all the upgrades it's still way cheaper than the real thing in stock form the trx4 plus the upgrades would be around £800 while this with all the upgrades still less than half of that I do understand what you saying about the quality but to be honest with you this is actually decent not as bad as you might think I have had the trx4 with me do do some work and honestly I don't see £600 worth of RC in it .
Thanks for the comment and thanks for checking it out it's appreciated 👍