Se ve muy bueno el proyecto, pero no me parece que la entrada de audio vaya conectada directo a los al positivo de la batería... Podría dañar el teléfono
gonna give this in one try (because the creator just blanks up when its evident about the truth) your phone will literally burn down because of this.(you know why, the freaking Vcc line is basically connected to Ain as well) also, this is NOT how you make amps. What do you think a Ground line does in an amp that makes you wire VEE and Ain Ground in 2 completely different areas? also how in the earth can a 2ohm speaker that small be rated for 3000W? even my 6x9 is 260w max! also speaker cone movement looks kinda sus.. Then again, when you look at the 'testing part', the speculated (+ve) and (-ve) of the 'battery' looks connected to the speaker (+ve) and (-ve) (because no one in a right mind would heat-shrink 2 wires of the same color for no reason(It wasn't heat-shrinked when it was being soldered), and in the actual circuit 'battery' (-ve) is actually connected to the speaker(-ve) with a diode and a capacitor in series) and since a diode rectifies AC, those weird oscillations of the speaker(if its not CGI,) are resulted because of it. we could conclude that;(and also TL;DR); a) the 'battery' has a hidden amp in it b) your phone wouldn't make it if it was actually hooked up to Vcc c) that this video is 100% FAF and you should avoid these kind of stuff. Why do people including this guy post these fake stuff and make electronics look like a joke? After all, many ICs exist with as little as 5 pins(TDA2050,32W) that make actual audible, clear 'sound' with simple circuit designs. okay, let's say you dont know how to solder them correctly or something, *PAM8610, TPA3110, TPA3118, TDA8932, TPA3116D2 left the chat crying* Need I say more?
i think the mini amplifier is hiden inside that battery case and the output of the battery is the output to speaker from the amplifier inside the battery case.
Well said I watch these kind of channels to learn and watch the mother of all invention necessity! When it's not correct though it actually hinders the learning process and turns me off! That's why I always go right to the comments.
@@Bryan-l6n1w thanks for the reply : ) similar kind of strategy here as well : ) anyway, just saying, the best invention is the one you invent. but when it goes terribly wrong, this abomination happens. if you are here to learn about **real** electronics, there are tons of good channels like greatscott and electroboom which not only me, but many people recommend.
El proyecto es muy sencillo pero no llega a 1000 watios por supuesto que una persona que sabe poco de electrónica lo vea como algo extraordinario y para 1000 w es necesario 100v cc
As I= V/R and P= V*I, so I= P/V = 1000/12= 83 Amperes. As it is a "sinewave," you can use RMS (multiply by .7071) = 59 amperes. So to get 59 amps in a 2 ohm charge, you need V =119 V at least and for peak power 166V (not rms). So you are right!...
Look like a hoax. Audio line connected to DC 12 V? that is very extraneous. Maybe a guy who want you to burn your phome and make fun of you... Audio output is low impedance. the amplifier must have high impedance and no voltage!
fake fake fake fake fake fake gonna give this in one try (because the creator just blanks up when its evident about the truth) your phone will literally burn down because of this.(you know why, the freaking Vcc line is basically connected to Ain as well) also, this is NOT how you make amps. What do you think a Ground line does in an amp that makes you wire VEE and Ain Ground in 2 completely different areas? also how in the earth can a 2ohm speaker that small be rated for 3000W? even my 6x9 is 260w max! also speaker cone movement looks kinda sus.. Then again, when you look at the 'testing part', the speculated (+ve) and (-ve) of the 'battery' looks connected to the speaker (+ve) and (-ve) (because no one in a right mind would heat-shrink 2 wires of the same color for no reason(It wasn't heat-shrinked when it was being soldered), and in the actual circuit 'battery' (-ve) is actually connected to the speaker(-ve) with a diode and a capacitor in series) and since a diode rectifies AC, those weird oscillations of the speaker(if its not CGI,) are resulted because of it. we could conclude that;(and also TL;DR); a) the 'battery' has a hidden amp in it b) your phone wouldn't make it if it was actually hooked up to Vcc c) that this video is 100% FAF and you should avoid these kind of stuff. Why do people including this guy post these fake stuff and make electronics look like a joke? After all, many ICs exist with as little as 5 pins(TDA2050,32W) that make actual audible, clear 'sound' with simple circuit designs. okay, let's say you dont know how to solder them correctly or something, PAM8610, TPA3110, TPA3118, TDA8932, TPA3116D2 left the chat crying
great ideas, very good project
Thank bro
If you would had given the circuit diagram, then it would be very useful
Nice working style... I like
Se ve muy bueno el proyecto, pero no me parece que la entrada de audio vaya conectada directo a los al positivo de la batería... Podría dañar el teléfono
Yo lo quiero armar pero con su comentario lo pensare
lo mismo pense, la entrada deberia ir mediante un capacitor al gate
Would you Pls show me the Circuit schematic? TKS a lot!
Super mantap basnya kalo boleh pake transistor apa ya bang terima kasih ditunggu infonya
fgh60N60 gan itu igdt di atas mosfet
Wow very nice
Or banao i gbt ka amplifier very nice video sir thanku ❤❤
Great comment, thank bro
Mon ingénieur je besoin de man prendre l'électronique
Legal.gostei joaoalves.❤❤❤
por cierto tuviste que bajarle los ohmios al parlante para que pueda moverse un poco y este parlante que muestras
aquí es de 25 w y no de 2000
I need circuit diagram and components value for the pj
Ficou show de bola viu...! Vou tentar fazer
Eu tambem
No da ni 10 vatios de salida 👀
EVERYTIME 10million watts!!😂 love it though
Mantap 😁👍
Marvelous, never heard of 3000watts speaker of that size...Where can I buy? Is it from you also?
😂
🗿😂🗿😂
Nice!
thank
Super bro
Quantos volts da bateria ??
Please sir you can say the no of igbt and diode
Làm thế này Sài ổn định trong thời gian dài được không bạn?
Mình chưa test thử trong thời gian dài bạn ạ. Cảm ơn bạn rất nhiều
Si no tengo la mica 155 cual puedo usar
Muito bacana parabéns top top demais
ótimo, obrigado cara
WOW 😁👍
nice
3000 watts ? You live in a fantasy world hahahahahaha!!!!!!!
This is mono?
Bộ khếch đại nằm trong bình 12v và vết gắn bị lộ
Si me pueden ayudar con eso
❤
Sy cb kok gak bunyai mas
Kreatif
Y cuando quieres escuchar 2 parlantes
3000 watts???😅😂😢
Is he serious 😂😂
gonna give this in one try (because the creator just blanks up when its evident about the truth)
your phone will literally burn down because of this.(you know why, the freaking Vcc line is basically connected to Ain as well)
also, this is NOT how you make amps.
What do you think a Ground line does in an amp that makes you wire VEE and Ain Ground in 2 completely different areas?
also how in the earth can a 2ohm speaker that small be rated for 3000W? even my 6x9 is 260w max!
also speaker cone movement looks kinda sus..
Then again, when you look at the 'testing part', the speculated (+ve) and (-ve) of the 'battery' looks connected to the speaker (+ve) and (-ve) (because no one in a right mind would heat-shrink 2 wires of the same color for no reason(It wasn't heat-shrinked when it was being soldered), and in the actual circuit 'battery' (-ve) is actually connected to the speaker(-ve) with a diode and a capacitor in series) and since a diode rectifies AC, those weird oscillations of the speaker(if its not CGI,) are resulted because of it.
we could conclude that;(and also TL;DR);
a) the 'battery' has a hidden amp in it
b) your phone wouldn't make it if it was actually hooked up to Vcc
c) that this video is 100% FAF and you should avoid these kind of stuff.
Why do people including this guy post these fake stuff and make electronics look like a joke?
After all, many ICs exist with as little as 5 pins(TDA2050,32W) that make actual audible, clear 'sound' with simple circuit designs. okay, let's say you dont know how to solder them correctly or something,
*PAM8610, TPA3110, TPA3118, TDA8932, TPA3116D2 left the chat crying*
Need I say more?
Бро, если шаришь, будь добр, пришли схему пайки и какие нужны запчасти для создания своими руками простого усилителя хотя бы ват на 100!
i think the mini amplifier is hiden inside that battery case and the output of the battery is the output to speaker from the amplifier inside the battery case.
Well said I watch these kind of channels to learn and watch the mother of all invention necessity! When it's not correct though it actually hinders the learning process and turns me off! That's why I always go right to the comments.
@@Bryan-l6n1w thanks for the reply : ) similar kind of strategy here as well : ) anyway, just saying, the best invention is the one you invent. but when it goes terribly wrong, this abomination happens. if you are here to learn about **real** electronics, there are tons of good channels like greatscott and electroboom which not only me, but many people recommend.
Oh my god its 100000 watt
El proyecto es muy sencillo pero no llega a 1000 watios
por supuesto que una persona que sabe poco de electrónica lo vea como algo extraordinario
y para 1000 w es necesario 100v cc
As I= V/R and P= V*I, so I= P/V = 1000/12= 83 Amperes. As it is a "sinewave," you can use RMS (multiply by .7071) = 59 amperes. So to get 59 amps in a 2 ohm charge, you need V =119 V at least and for peak power 166V (not rms). So you are right!...
Is a vibration no sound...
yes
thank you
It's 10000 Watts
Has anyone try this
😮😊😊
الفيديو مزيف لقد عملت نفس الدائرة ولكنها لاتعمل
Le deux mosfet son séparer
Il faut mettre en desous de chaque mosfet un séparateur qui le sépare avec le refroidisseur.
3000 watt 😃🤣
2om
Más parece de 5000 whats
3000 wats kkkkkkkkkkkkkkkk
Fake
Why fake
Riyale
Really
😅😅😅
3000watt 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
🤣🤣
😂😂😂😂😂
2ohms 3000w 🤣🤣🤣🤣🤣🤣🤣🤣🤣
Look like a hoax. Audio line connected to DC 12 V? that is very extraneous. Maybe a guy who want you to burn your phome and make fun of you... Audio output is low impedance. the amplifier must have high impedance and no voltage!
no never
Fake video
fake fake fake fake fake fake
gonna give this in one try (because the creator just blanks up when its evident about the truth)
your phone will literally burn down because of this.(you know why, the freaking Vcc line is basically connected to Ain as well)
also, this is NOT how you make amps.
What do you think a Ground line does in an amp that makes you wire VEE and Ain Ground in 2 completely different areas?
also how in the earth can a 2ohm speaker that small be rated for 3000W? even my 6x9 is 260w max!
also speaker cone movement looks kinda sus..
Then again, when you look at the 'testing part', the speculated (+ve) and (-ve) of the 'battery' looks connected to the speaker (+ve) and (-ve) (because no one in a right mind would heat-shrink 2 wires of the same color for no reason(It wasn't heat-shrinked when it was being soldered), and in the actual circuit 'battery' (-ve) is actually connected to the speaker(-ve) with a diode and a capacitor in series) and since a diode rectifies AC, those weird oscillations of the speaker(if its not CGI,) are resulted because of it.
we could conclude that;(and also TL;DR);
a) the 'battery' has a hidden amp in it
b) your phone wouldn't make it if it was actually hooked up to Vcc
c) that this video is 100% FAF and you should avoid these kind of stuff.
Why do people including this guy post these fake stuff and make electronics look like a joke?
After all, many ICs exist with as little as 5 pins(TDA2050,32W) that make actual audible, clear 'sound' with simple circuit designs. okay, let's say you dont know how to solder them correctly or something,
PAM8610, TPA3110, TPA3118, TDA8932, TPA3116D2 left the chat crying
Copied from @hvplayzchess
Fake
Fake