ONE OF THE MOST HELPFUL VIDEOS I HAVE EVER SEEN ON RUclips SO FAR , DOES THIS WORK ON ALL TOYOTA'S AND THANKS SO MUCH THIS WAS GREAT MILLION VIEWS FOR SORE !
You are such a legend, I have toyota echo 1999, which has been my daily for the past 3 years and it goes strong every day, This morning I went to start it and it cranked but it just wouldnt start I called my roadside assistance, the guy started off with cleaning the crankshaft sensor, and fiddling with other stuff for about 30 mins Finally, he figured out its the immobiliser, and he said the battery on my key has gone flat and I need to get a new one, I went a got a battery but it still wont start, than he fiddled for another 30 mins and finally said I ll have to tow it to toyota and there is nothing he can do And we all know how those stealers rob you, So I tried this and boom started like a dream Thankyou so much :)
@@jahsunhandy I was asking him if this is just a temporary fix...I tried this myself and it worked i even programmed a old key which my lock smith told me wouldn't work with the new computer I installed in my Toyota..
My 05 sienna had a few random times where it wouldn't start because the engine immobilizer wasn't sensing the keys. One day it wouldn't start at all and the immobilizer dash light wouldn't turn off. Did this and it started right up. Thanks!
I had about 20 Camry's and they were all trouble. We have one left and its a pain. Last year the key was lost and we took the key and parts from the second last which had been wrecked. I changed the key with the security module, that wasn't enough, I had to change the TCM module, then I got VSC codes which disabled the hybrid regen. But still it did not work no matter what, no shifter unlock and no steering unlock, so I changed the radio, then the shifter unlocked but not the steering, so then I changed the key button, then the security all went to normal but still no start and no unlock steering, so then I changed the steering lock module then the car started but then set the codes for VSC and hybrid regen again. So after much to do, reset by "paper clip trick" got everything working and the car was good again, but then some ass hole lost the key AGAIN! So now a year later, the car is finally sent to Toyota for the new key, but all they do is program and say its done. All the same shit over again, VSC and hybrid codes which our shop can not reset, only Toyota they say. But I had done this last year but I can't remember the 9 million step procedure with this silly paper clip crap. Last year I had made a button just so I could press it the correct number of times within a certain time frame... Frustrating as hell. Nothing should be difficult! It should be recalled!
You're the man it worked on my 2006 Toyota Camry and I even programmed my old key from the ECU I replaced so now I have 2 working keys..thanks and good video 👏👏👏
@@5.4weldingtruck I used a paper clip and insert it in the obd reader port.. it's been a while so I can't remember which hole I insert the paper clip I think it's 4 and 13 and turn the ignition to on and let the car sit for 30 min then turn it off and remove the paper clip..do a search on RUclips there's a few videos showing how to do it..
If you reset the anti-theft system, do you need to reprogram after the reset? I have been having problems since installing an aftermarket stereo that triggered the anti-theft system. When I did the ignition to on 5x, I was able to start the car, but now have been having slow crank issues ever since. Tested battery, it was fine. Had me going crazy. Do you think reprograming the current ecu will help/possiblt solve my issue?😊
Hi Will this works, on the original ECU ? I have 2021 Hilux crank and won’t start? Can I do this method to rest my original ECU, or it can only be done for replacement ECU?
Awesome vid it's the second time I have to watch it my daughter keeps leaving her lights on 😒 The only thing I had to do differently is I had to roll the car a lil bit after the process Coz it didn't start just with the process
@@scottlarocc4781 Hello no I didn't get towed I went thru the whole process and for some reason didn't start but I just rolled it bout three feet then it started
@@erickquinonez8184 it's just weird because my girl her truck broke down so it had a transmission issue and then we tow it to the house and now the anti-theft is not letting the car turn on the headlights were also staying on really weird
What if you didnt replace your ECU, would this still work to reprogram the ECU that I already have? Something is going on with my 2001 Toyota Tundra security system, it sometimes gets triggered and the security system light goes out and Im unable to start my engine. Fuses are all good, my battery is good, so Im lost on what is triggering my security system light to go out when I try cranking the engine.
Same here. Just got back from being out of town few days, stopped to get gas, turned off the car, noticed my radio wasn’t playing when it should, and car wouldn’t start anymore; i kept taking the key out/in, by the Grace of God it started, i turned it off, it wouldn’t start again; i filled a full tank of gas, was able to get car started, but gas indicator still showing empty, not full; got home, tried the key out again, engine immobilizer light flashes, very strange behavior....
@@igobythisname mine is doing this now. 2000 tundra. Went to go back to work and my truck just did a click and the truck went dead. Won’t start or turn over. I’m going to try a few of these tricks I’ve saw. I tested battery fuses and the wire connections I could see
Hey how do you do that but with a Toyota celica 2000 I took off battery and I guess it triggered anti theft system but I don’t know how to rest it or deactivate it help
I just rebuilt the entire engine from ground up on a 2008 scion xd can I reprogram the ecu to relearn and reset all security features back to default? Is this procedure the same for 2008 models as well?
i am going to try this tomorrow hoping it works rebuilt 2006 tundra engine at 221k put it back in and i have no ignition power all of a sudden but power everywhere else and i can jumper the starter soo the engine is free and cranks power to fuel pump just no spark soo fingers crossed this ecu reset does the trick thanks!
@@lucyfaye567 for me it ended up being stuck in security lockout mode or whatever its called i contacted previous owner he forgot to give me the key fob with it it started right up
excellent video, tried to program a 2008 Tundra by adding a key, then wiping the memory and adding 2 more .... vehicle would not accept either key or program this was the only fix, worked perfectly make sure to cycle a key 5x ON then OFF otherwise key won't program
I bought a car but only have a key with no chip until I can get it from the last owner. 2001 gs300. Do you think it would learn the chip code on a new fob for the key after doing this??
9l guys I have been stranded for well over a month and that's my only set of wheels and everybody wants to post a video about how to reset this shit and no one wants to tell you you got to cycle the key at the end there's not one fucking video there's not one person where you can read this at and then tell it to you literally I just heard it for the first time reading it and this man's comment. So that's the fucking trick I must be running into is you got to let it sit for that 30 minutes then you have to turn around and cycle the key five times why does everybody seem to forget that small but major detail no wonder I can't get my shit programmed what a joke
That won't work on 2012-17 Camry so does anyone know how to do them? My $1500 scanner tells me to do it the way you're saying and it don't work cause they stopped using that method in 12 on Camrys so any help would be appreciated
Will this work on a 2003 Lexus SC430? I only have the valet key and want to reprogram ECU for a master key I purchased on eBay. Also, once master key is programmed, I assume I need to reprogram the valet key that I have too.
I had my ecu cloned with my key at a certified locksmith for my 2000 Lexus GS300. Do i still need to do this procedure?? My car starts but i remember 2 times it would crank no start with immobilizer flashing
Hello, correct me if i'm wrong, but that looks like pin 5 and 13 not 4 and 13. Pin 4 and 13 are not right under/above each other. If you count the top-pins from the left you end up in pin number 5. That is signal ground and not chassis ground, I don't know if that matters. Or is this a different specific pin 5 and 13 procedure? Regards
Bought a new Toyota Prius this past Tuesday and the over priced alarm doesn't even work and is causing electrical outages. I've tried contacting the dealer and they haven't replied. So you're lucky
Do you know how to do this for 2009 Camry HV? I had to do this last year but now I can't find the info on the internet anywhere. Our company used to have 20 of these Camry hybrids which all had such a problem and this is the last one we have left and now I can't remember how this is done. These things are a pain and should have been recalled for this BS.
*so will all those lights come on just like that if the safety pin is in correctly? I was trying to fix my clock, & dome light, and in process noticed the battery was bulging so I got a new battery and immediately the horn started made me jump twice. Took that fuse out, lights still flashing, and now trying to get the light to go off. This is on a 97 camry. My 99 never did this at all.
My 2007 Toyota Rav4 does not start from time to time due to apparent security system issues. I have a couple of questions: could your programing procedure be used to reprogram the problem ECU already in the car. Would attempting to reprogram the old ECU potentially create other problems in the ECU in addition to starting problems. If we have to replace the ECU where would you purchase a reliably working used ECU. Thank you for your response and for such a great video. Regards
My battery died and I can't get a jump because the anti-theft won't turn off or reset. See here that the battery is working. Any suggestions. Great video. Subscribed even if you can't help
@@cameronvangreuning5779 It was actually a couple of things. Finally found second fob, and after putting new battery in, it worked.. The other had evidently been broken. Got the battery charged, but car still wouldn't start because of bad fuel pump. I actually took the battery out to make sure it was fine.
Hello, is there such a reset on Toyota Prius 1st generation? I had the immobilizer and key replaced because I lost my two original programmed keys. Now when I tried to start the car the security light stopped blinking yet the engine would not turn on.
I was checking all the fuses and somehow triggered the immobilizer and now the engine cranks, radio works, remotes word, battery test is good but the car won’t start. It just cranks. I tried it, waited a bit longer than 30 and it didn’t work. My security light is off when the key is in the ignition. I can’t figure it out. Any tips?
I been dealing with the exact same issue in my 13 Tundra. Mecanic Shop can’t figure it out. They even “re-program” computer, it worked for two days and now it won’t even crank. Just kills the power in the battery when turn the key.
Hi I have a 2003 Toyota Sienna I lost all my keys and had one made at the dealership but not programmed I tired with the autel scanner and it would not work can this work for my car !?!? I got a master key made but I have no keys to the car only the 1 new one
A month ago i replaced the fusible link that's in the fuse box. To do that, i did have to remove the ecm to replace the fusible link. After the replacement, the lock system (anti theft system) stopped working and i does chirp, lock or unlock when i press the remote. Also i cannot open the trunk with the remote. Can this issue be resolved by resetting the ecm like in the video?
Will this procedure allow me to ADD a key, meaning, can I use this procedure to program a second key as well, or will this procedure delete any existing keys as it adds the new key?
I have a 99 Celica. It has NO pin 13. Is there another method to do this, or does the 99 not have the immobilizer? I read Toyota started immobilizer in 1998. Any help is appreciated.
Ive had my 06 Sienna for over a year without the anti theft light blinking. Today it randomly started blinking after I installed a backup camera. I am able to start the car with no problems thus far but I am confused as to why the anti theft light is blinking all of a sudden.
My aunts car is a 2005 Scion Tc that wont start. But she didn't have that changed. The security light is flashing on the dash. She said it never did that before. I just changed the fuel pump, because I didn't hear it come on. Now I do hear it come on, but it still does not start. Before I changed the fuel pump, I changed the serpentine belt and tensioner. That was a pain to do. I had the battery disconnected. I disconnected the antilock brake system, just to move it a little more, to get room by the motor mount, so I could pull it off, so I could get the tensioner bolt out. I think it needs a bolt a little bit shorter. LOL I wonder if this would help me? IDK I read other people drive their cars with that light flashing. This one will not start. It cranks, but will not start. Just hooked up my scan tool, it says B2796 No communication in immobilizer syatem.
Hello will this work for a 2000 toyota avalon? I had to swap the tumblr behind the ignition cylinder and now the security light flashes and car won't recognize the key nor the fob. All the dash needles are out of position as well.
It appears to me in the video that you are using pin5 and pin13. Counting the pins from left to right across the top, in pin 5. Right? pin13 is directly across from it.
Will this work on my 2006 Toyota Matrix? My car died I believe it is my alternator and when I took the battery out and replace the battery the alarm just started beeping and wouldn't go off how can I fix this
did you ever get an answer? my 07 did the same exact thing. my battery was always dead so i went to go get a new battery and when i installed it my alarm went off and then it stopped but the anti theft activated.
I have a 2011 Toyota Sienna, I replace the engine completely, it crank but it won't start.. dies off after few seconds from cranking. What should I do?
Have 06 Corolla. I wonder if that would work . have had my car down for a minute and it started acting up like maybe the ECU is bad. Well I'm not for sure what's going on with car. but I do know that my ECU is not sending the information to my fuel pump to prime or start.
ONE OF THE MOST HELPFUL VIDEOS I HAVE EVER SEEN ON RUclips SO FAR , DOES THIS WORK ON ALL TOYOTA'S AND THANKS SO MUCH THIS WAS GREAT MILLION VIEWS FOR SORE !
Thanks yes it will for for all 2002 and newer Toyota Lexus and Scion
@@vehix411 I imagine this will work on a 1997 model after stereo receiver swap also, correct?
InstaBlaster
@@chevalierdeloccident5949 did u have any lucky with this or ur 1997?
@@markdeartola1154 No. It turns out my problem was not related to this.
Worked on my 2009 ES 350. This video saved me a lot of money. Thank you!
thank you for making a simple short video💯, one video had this guy going on and on for over 20 minutes and it was a starter 🤦😤
You are such a legend, I have toyota echo 1999, which has been my daily for the past 3 years and it goes strong every day,
This morning I went to start it and it cranked but it just wouldnt start
I called my roadside assistance, the guy started off with cleaning the crankshaft sensor, and fiddling with other stuff for about 30 mins
Finally, he figured out its the immobiliser, and he said the battery on my key has gone flat and I need to get a new one,
I went a got a battery but it still wont start, than he fiddled for another 30 mins and finally said I ll have to tow it to toyota and there is nothing he can do
And we all know how those stealers rob you,
So I tried this and boom started like a dream
Thankyou so much :)
Yeah but that's just a temporary fix right?
@@trini_boi2414 what do you mean? I thought it reprogrammed the system to your key? Could someone steal cat with h this hack? Scary
@@jahsunhandy I was asking him if this is just a temporary fix...I tried this myself and it worked i even programmed a old key which my lock smith told me wouldn't work with the new computer I installed in my Toyota..
No wonder why mechanics love to work on Toyota's so much!
Because they rarely have too!! Exactly!!
THANK YOU!!! It worked on my 2006 sienna. Replacement ecu.
My 05 sienna had a few random times where it wouldn't start because the engine immobilizer wasn't sensing the keys. One day it wouldn't start at all and the immobilizer dash light wouldn't turn off. Did this and it started right up. Thanks!
I had about 20 Camry's and they were all trouble. We have one left and its a pain. Last year the key was lost and we took the key and parts from the second last which had been wrecked. I changed the key with the security module, that wasn't enough, I had to change the TCM module, then I got VSC codes which disabled the hybrid regen. But still it did not work no matter what, no shifter unlock and no steering unlock, so I changed the radio, then the shifter unlocked but not the steering, so then I changed the key button, then the security all went to normal but still no start and no unlock steering, so then I changed the steering lock module then the car started but then set the codes for VSC and hybrid regen again.
So after much to do, reset by "paper clip trick" got everything working and the car was good again, but then some ass hole lost the key AGAIN!
So now a year later, the car is finally sent to Toyota for the new key, but all they do is program and say its done. All the same shit over again, VSC and hybrid codes which our shop can not reset, only Toyota they say. But I had done this last year but I can't remember the 9 million step procedure with this silly paper clip crap. Last year I had made a button just so I could press it the correct number of times within a certain time frame... Frustrating as hell.
Nothing should be difficult! It should be recalled!
You're the man it worked on my 2006 Toyota Camry and I even programmed my old key from the ECU I replaced so now I have 2 working keys..thanks and good video 👏👏👏
How did you reprogram the key
@@5.4weldingtruck I used a paper clip and insert it in the obd reader port.. it's been a while so I can't remember which hole I insert the paper clip I think it's 4 and 13 and turn the ignition to on and let the car sit for 30 min then turn it off and remove the paper clip..do a search on RUclips there's a few videos showing how to do it..
@@trini_boi2414 thank you! I tried it too but no luck
Thank you!
@@trini_boi2414 trying this on my 2008 right now.. fingers crossed
@@5.4weldingtruck did you find the video on how to program the key? There's a few on RUclips and it's a very easy process..
Тойота Целика 2zz -ge обнулилась БОЛЬШОЕ СПАСИБО Toyota Celica 2zz-ge reset geklappt DANKESCHÖN
Worked for my 03 avalon thanks for saving me 130 plus towing!!!
Hi was that a temporary fix or is it still working?
Still working no issues
@@bryanholland7464 omg it worked 😮😮😮...thanks
Engine wouldn’t start.
I do need to reset the ECU after replacing a crankshaft position sensor?
@@victorisek4432 he does not respond to any comment or help anyone
If you reset the anti-theft system, do you need to reprogram after the reset? I have been having problems since installing an aftermarket stereo that triggered the anti-theft system. When I did the ignition to on 5x, I was able to start the car, but now have been having slow crank issues ever since. Tested battery, it was fine. Had me going crazy. Do you think reprograming the current ecu will help/possiblt solve my issue?😊
If you disconnect the battery for an hour then reconnect it will it solve the problem or not?
The video shows the insertion of the jumper on pins 5 and 13.
You have to look at the holes that actually have a pin.
no its 13 and 4
@@TONYSTARK-jh2wu that's how I see it. Pin 4 and 13! I'm wondering if resetting the ecm with the alarm will clear up my mess on a 2003 toyota matrix.
@@TONYSTARK-jh2wu if you count the pins, it is 5 and 13. The first 3 are blank and he's on the one next to 4.
@@brianburnssailorslife5383 hi mate I can’t find number 13 my 13 is blank and if it twist other way around 4 will be blank so what I do ? Thank you
A paperclip? Omg. I'll try it. Otherwise I have to take it to the dealership anyways so it definitely worth a try.
If this works you are the man!
did it work?
Will this work on a 2000 lexus gs300 ?
Hi
Will this works, on the original ECU ? I have 2021 Hilux crank and won’t start?
Can I do this method to rest my original ECU, or it can only be done for replacement ECU?
Do you have a similar trick but for a older car with a obd1 port???
Awesome vid it's the second time I have to watch it my daughter keeps leaving her lights on 😒
The only thing I had to do differently is I had to roll the car a lil bit after the process
Coz it didn't start just with the process
Erick did your car get towed n then after that not start and then you had to jump this ( with paper clip) then roll it to start it ?
@@scottlarocc4781
Hello no I didn't get towed
I went thru the whole process and for some reason didn't start but I just rolled it bout three feet then it started
@@erickquinonez8184 it's just weird because my girl her truck broke down so it had a transmission issue and then we tow it to the house and now the anti-theft is not letting the car turn on the headlights were also staying on really weird
@@scottlarocc4781
Did the battery go dead
@@erickquinonez8184 no bro
Thank you i hope this works!
What if you didnt replace your ECU, would this still work to reprogram the ECU that I already have? Something is going on with my 2001 Toyota Tundra security system, it sometimes gets triggered and the security system light goes out and Im unable to start my engine. Fuses are all good, my battery is good, so Im lost on what is triggering my security system light to go out when I try cranking the engine.
Same here. Just got back from being out of town few days, stopped to get gas, turned off the car, noticed my radio wasn’t playing when it should, and car wouldn’t start anymore; i kept taking the key out/in, by the Grace of God it started, i turned it off, it wouldn’t start again; i filled a full tank of gas, was able to get car started, but gas indicator still showing empty, not full; got home, tried the key out again, engine immobilizer light flashes, very strange behavior....
@@igobythisname mine is doing this now. 2000 tundra. Went to go back to work and my truck just did a click and the truck went dead. Won’t start or turn over. I’m going to try a few of these tricks I’ve saw. I tested battery fuses and the wire connections I could see
Any luck you guys?
Hey how do you do that but with a Toyota celica 2000 I took off battery and I guess it triggered anti theft system but I don’t know how to rest it or deactivate it help
Will it work for toyota keyless car with no option of key insertion?
2010 corolla. Will this work for adding a new key? instead of going to the stealer to program a new key.
great video. I tried reset and same problem. any suggestions?
Need to scann maybe immo box is failing
Will this work with a stuck horn?
I tried and replaced many parts but I still have the problem.
Now I believe it's something with the ecu
Thank you for your great information!!! Will this procedure work on 24v hino?
Thanks a lot brother it worked on my 2005 tc🤩🤩
Men i follow u in you tube in years i really learn a lot thank you very much
Will this work for a 08 camry???
Hi. thanks for this. it works for TOYOTA COROLLA 2010 ? please
Please
My car is Toyota camry 2016, it has the same problem as your car. Can I use this method?
I just rebuilt the entire engine from ground up on a 2008 scion xd can I reprogram the ecu to relearn and reset all security features back to default? Is this procedure the same for 2008 models as well?
Yes this will work for your car
Used this on a cambry 2003 it worked after learning a new key :)
So the key was the issue?
@@ochoreacts Customer lost his key, I programed a new one, but didnt work until I did this.
How do you make the car learn the new keys though?
i am going to try this tomorrow hoping it works rebuilt 2006 tundra engine at 221k put it back in and i have no ignition power all of a sudden but power everywhere else and i can jumper the starter soo the engine is free and cranks power to fuel pump just no spark soo fingers crossed this ecu reset does the trick thanks!
Having same issues. Did it work?
@@lucyfaye567 for me it ended up being stuck in security lockout mode or whatever its called i contacted previous owner he forgot to give me the key fob with it it started right up
Any way to reprogram the locks on a 2005 Scion TC
after a battery change?
excellent video, tried to program a 2008 Tundra by adding a key, then wiping the memory and adding 2 more .... vehicle would not accept either key or program
this was the only fix, worked perfectly
make sure to cycle a key 5x ON then OFF otherwise key won't program
I bought a car but only have a key with no chip until I can get it from the last owner. 2001 gs300. Do you think it would learn the chip code on a new fob for the key after doing this??
@Craig Pakkala Do you cycle the key 5x after putting in the paperclip? Or another time?
Thanks!
You have to wait, only cycle the key at the end of the routine
@@CraigPakkala do you cycle the key without the paperclip on sir??
9l guys I have been stranded for well over a month and that's my only set of wheels and everybody wants to post a video about how to reset this shit and no one wants to tell you you got to cycle the key at the end there's not one fucking video there's not one person where you can read this at and then tell it to you literally I just heard it for the first time reading it and this man's comment. So that's the fucking trick I must be running into is you got to let it sit for that 30 minutes then you have to turn around and cycle the key five times why does everybody seem to forget that small but major detail no wonder I can't get my shit programmed what a joke
That won't work on 2012-17 Camry so does anyone know how to do them? My $1500 scanner tells me to do it the way you're saying and it don't work cause they stopped using that method in 12 on Camrys so any help would be appreciated
Used this on an 08 Toyota Rav4, worked, thanks!
Was it push button?
Will this work on a 2003 Lexus SC430? I only have the valet key and want to reprogram ECU for a master key I purchased on eBay. Also, once master key is programmed, I assume I need to reprogram the valet key that I have too.
2001 toyota highlander here hoping this saves my car been dealing with security issues for over a year
Very helpful thank you so much.
I had my ecu cloned with my key at a certified locksmith for my 2000 Lexus GS300. Do i still need to do this procedure?? My car starts but i remember 2 times it would crank no start with immobilizer flashing
Will this work on a 98 Ford Mustang ?
IT FUCKING WORKS!!! OMG MY SUP AND I COULDN'T BELIEVE IT ACTUALLY WORKED!!
Great video. Will this work to fix a 2000 Camry alarm that goes off randomly and won't let me unlock the doors to stop it?
Goin to try it on my 2000 toyota solara hopefully this works. 💪
Did it work?
I have an 05, did it work??
I should have watched this before I went to locksmith... Does this work to program new key remote/fob (e.g. 2010 Sequoia)?
God I love RUclips! You saved my sanity brother
Hello, correct me if i'm wrong, but that looks like pin 5 and 13 not 4 and 13. Pin 4 and 13 are not right under/above each other. If you count the top-pins from the left you end up in pin number 5. That is signal ground and not chassis ground, I don't know if that matters. Or is this a different specific pin 5 and 13 procedure? Regards
That what I see too. What did you do. I don’t want to mess up
Would this work to program a new key on a non-ecu swap?
Sir will that work for a 2008 toyota tundra??thanks
Can we do this with KEY FOB ignition for a 2010 RAV 4?
Bought a new Toyota Prius this past Tuesday and the over priced alarm doesn't even work and is causing electrical outages. I've tried contacting the dealer and they haven't replied. So you're lucky
Do you know how to do this for 2009 Camry HV?
I had to do this last year but now I can't find the info on the internet anywhere.
Our company used to have 20 of these Camry hybrids which all had such a problem and this is the last one we have left and now I can't remember how this is done.
These things are a pain and should have been recalled for this BS.
Thanx
. thanks bro 👍👍👍🙏🙏🙏
I have lost all keys on my LX470 Landcruiser will this work with a new chip key.
*so will all those lights come on just like that if the safety pin is in correctly?
I was trying to fix my clock, & dome light, and in process noticed the battery was bulging so I got a new battery and immediately the horn started made me jump twice. Took that fuse out, lights still flashing, and now trying to get the light to go off. This is on a 97 camry. My 99 never did this at all.
My 2007 Toyota Rav4 does not start from time to time due to apparent security system issues. I have a couple of questions: could your programing procedure be used to reprogram the problem ECU already in the car. Would attempting to reprogram the old ECU potentially create other problems in the ECU in addition to starting problems. If we have to replace the ECU where would you purchase a reliably working used ECU.
Thank you for your response and for such a great video.
Regards
What years of this Toyota u short pin 4-13 ??
My battery died and I can't get a jump because the anti-theft won't turn off or reset. See here that the battery is working. Any suggestions. Great video. Subscribed even if you can't help
Did you ever find out what fixed it? Having same issue
@@cameronvangreuning5779 It was actually a couple of things. Finally found second fob, and after putting new battery in, it worked.. The other had evidently been broken. Got the battery charged, but car still wouldn't start because of bad fuel pump. I actually took the battery out to make sure it was fine.
Funktioniert es auch bei Toyota Corolla 2006 ??
Avalon 2003 Engine wouldn’t start.
Do I need to reset the ECU after replacing a crankshaft position sensor?
Trying this on. A 99 solara really hope it works
Can i do this if i replaced my ignition & have a key wit no chip ?
Great video thank you..
Hello, is there such a reset on Toyota Prius 1st generation?
I had the immobilizer and key replaced because I lost my two original programmed keys. Now when I tried to start the car the security light stopped blinking yet the engine would not turn on.
What pins on a 2013 Toyota Avalon to reset anti theft?
I was checking all the fuses and somehow triggered the immobilizer and now the engine cranks, radio works, remotes word, battery test is good but the car won’t start. It just cranks. I tried it, waited a bit longer than 30 and it didn’t work.
My security light is off when the key is in the ignition. I can’t figure it out. Any tips?
I been dealing with the exact same issue in my 13 Tundra. Mecanic Shop can’t figure it out. They even “re-program” computer, it worked for two days and now it won’t even crank. Just kills the power in the battery when turn the key.
Did you figure it out?
Did you figure it? Same issue
This idea fits all Toyota 2015 models with H chip after key loss?
Will this work for my 2003 toyota camry ?
Yes it should
Is it the same way with the Toyota Camry
Work in corrolla 2014 15 and16
Hi I have a 2003 Toyota Sienna I lost all my keys and had one made at the dealership but not programmed I tired with the autel scanner and it would not work can this work for my car !?!? I got a master key made but I have no keys to the car only the 1 new one
A month ago i replaced the fusible link that's in the fuse box. To do that, i did have to remove the ecm to replace the fusible link. After the replacement, the lock system (anti theft system) stopped working and i does chirp, lock or unlock when i press the remote. Also i cannot open the trunk with the remote. Can this issue be resolved by resetting the ecm like in the video?
Sorry i mean it doesn't chirp or lock or unlock
Will this procedure allow me to ADD a key, meaning, can I use this procedure to program a second key as well, or will this procedure delete any existing keys as it adds the new key?
When doing this do you have to replace the ecu behind instrument panel
If it works ill let you know 2010 avalon security light flashing.
I have a 99 Celica. It has NO pin 13. Is there another method to do this, or does the 99 not have the immobilizer? I read Toyota started immobilizer in 1998. Any help is appreciated.
Ive had my 06 Sienna for over a year without the anti theft light blinking. Today it randomly started blinking after I installed a backup camera. I am able to start the car with no problems thus far but I am confused as to why the anti theft light is blinking all of a sudden.
My aunts car is a 2005 Scion Tc that wont start. But she didn't have that changed. The security light is flashing on the dash. She said it never did that before. I just changed the fuel pump, because I didn't hear it come on. Now I do hear it come on, but it still does not start. Before I changed the fuel pump, I changed the serpentine belt and tensioner. That was a pain to do. I had the battery disconnected. I disconnected the antilock brake system, just to move it a little more, to get room by the motor mount, so I could pull it off, so I could get the tensioner bolt out. I think it needs a bolt a little bit shorter. LOL
I wonder if this would help me? IDK I read other people drive their cars with that light flashing. This one will not start. It cranks, but will not start.
Just hooked up my scan tool, it says B2796 No communication in immobilizer syatem.
Would this work on a 2010 Camry?
Can this work on my Toyota Brevis 2003
Will this work for a Lexus is300 2002
Hello will this work for a 2000 toyota avalon? I had to swap the tumblr behind the ignition cylinder and now the security light flashes and car won't recognize the key nor the fob. All the dash needles are out of position as well.
That's my same problem. I just replaced my ignition cylinder myself and im trying now to see if it works. I will give you a heads up once you respond
@@MrsSavonnejoy Hello Leslie did it start working for you?
It appears to me in the video that you are using pin5 and pin13. Counting the pins from left to right across the top, in pin 5. Right? pin13 is directly across from it.
No lo veas por el vídeo fíjate en los el nombra pin 4 clip pin13 el conector se muestra identificación con número del pin
Will it work on my just 98 Ford Ford Mustang v6, I just change the ecu on it and it doesn’t start and it has the theft light on
"Customer replaced the ECU". If you can reset it, there was no need to replace it, am I right? Why did he replace it?
This is to reset the security to get the car started otherwise it won’t even turn over
@@vehix411, but can I reprogram my existing ECU or is this reset only for a new one? 2002 Toyota Avalon
I have a 1996 Toyota Tacoma and having the security system light flashing if I do this should it fix it??
Well it work on a scion tc 2007
will this work for 08 caravan thanks
Will this work on my 2006 Toyota Matrix? My car died I believe it is my alternator and when I took the battery out and replace the battery the alarm just started beeping and wouldn't go off how can I fix this
did you ever get an answer? my 07 did the same exact thing. my battery was always dead so i went to go get a new battery and when i installed it my alarm went off and then it stopped but the anti theft activated.
Does this works on Lexus SC400?
Very helpful content.. Greatly appreciated!
I have a 2011 Toyota Sienna, I replace the engine completely, it crank but it won't start.. dies off after few seconds from cranking. What should I do?
Does this work with prius 07
Will this work on all car models. Like fiat
Vios 2007 G Keyless. i have problem with remote (2 pcs) always run out battery in a week. what should i do ? reset ECU just like u did ?
Have 06 Corolla. I wonder if that would work . have had my car down for a minute and it started acting up like maybe the ECU is bad. Well I'm not for sure what's going on with car. but I do know that my ECU is not sending the information to my fuel pump to prime or start.