Sir agar provided shaft size 2000× 2400 hai to car size Kitna hogi?? 10 person capacity lift me. Per floor 8 house hai aur 13 story building hai. Please reply sir
Sir...if building floor is 11 but 7th floor till completed and rest is left due to TDR not come...so can we fit lift at 7th floor with MRL ...and kya after TDR 11wen done kya me lift ko Extend kr sakta hu in case of MRL
Yes you could do that, but it will cost you a bit higher than a 11 floor lift. In this case I'll suggest, Take a 7 floor lift and finalize the extension of other 4 floors at the same time, the reason is when you go for MOD of a existing lift the cost is more.
Yes Possible. But not according to norms, someone local can provide you. According to norms you've to take minimum 5 person lift. for more info, write to aboutelevators@gmail.com
Yes Columns on sides are important. Building load and not be distributed to the shaft normally. BTW this question could be well answered by a RCC Consultant, I'm good at elevators only.
Thank you. Cabin width and depth depends on shaft size, If you get the shaft size, you can calculate the cabin size easily. Will make a video for that in near future. Keep supporting.
Hello Brother, just now Subscribed to your Channel. Will you please tell me : For 40*60 Plot Size : G + 3 Story Building 6 persons lift- Pit Dimensions and Cost and Best Company to buy with minimum maintenance ( DIY ). Thank you. Sai Praveen Cinema. From Telugu States. India
You'll need shaft size of 1. 1550x1550 mm for a Lift with Machine Room above (Pit-1500mm, Overhead 4200mm) 2. 1600x1600 mm for Lift without machine room. (Pit-1550mm, Overhead 4000 to 4200 mm) Cost: Local Companies: raging from 5L to 6.5L Brands (Like thyssenkurpp, OTIS, KONE, Schindler): 7L to 8.5L If you go with brands, you'll not have to worry about the quality and service for lift. For getting a good maintenance cost, negotiate the cost for next 3 years at the time of lift finalization. PS: I can't recommend a brand specifically, but go for one of them who is giving a good price to you according to your budget. Hope this works for you, for any more info mail me at aboutelevators@gmail.com
Hey! You can now order online from Casper Elevators using this link: mydukaan.io/casper Feel free to call us on +91-8169518932 if you need any help with ordering online. Thank you.
As per IS and NBC standards, you need to have 5 passenger lift minimum. But there are some 2-3 passenger lifts which you can see on internet. I don't think that need any particular shaft. Terry Lifts and likewise.
Hello, Consult them at the time of plinth and finalize the lift at the time of RCC completion. SO you get proper advice for shaft building and at RCC completion you need the GAD Drawings to complete the shaft. if you need to know more, mail at aboutelevators@gmail.com
I want to get more information, How l can contact to you Mr. ? Do you have email adress ? By the way l am mechanical engineer and l am in Elevator business field
Sir agar provided shaft size 2000× 2400 hai to car size Kitna hogi?? 10 person capacity lift me. Per floor 8 house hai aur 13 story building hai. Please reply sir
1100 in width and 1600 in Depth if it is a 10 Passenger Lift. for more info get in touch with us at aboutelevators@gmail.com
Awesome video sir. Could you pls confirm the lift shaft dimensions for 4 persons.
Thanks
minimum 5 person lift is needed to get PWD approvals.
Sir...if building floor is 11 but 7th floor till completed and rest is left due to TDR not come...so can we fit lift at 7th floor with MRL ...and kya after TDR 11wen done kya me lift ko Extend kr sakta hu in case of MRL
Yes you could do that, but it will cost you a bit higher than a 11 floor lift.
In this case I'll suggest, Take a 7 floor lift and finalize the extension of other 4 floors at the same time, the reason is when you go for MOD of a existing lift the cost is more.
Hello, Is it possible to have residential lift with 3 people capacity in the size 4 feet * 3.8 feet.. Thank you
Yes Possible. But not according to norms, someone local can provide you. According to norms you've to take minimum 5 person lift.
for more info, write to aboutelevators@gmail.com
Sir saft me cabin ka size kaise calculate krte hai plzz
will make a special video for this.
Min space required for machine less lift for 4 person ?
mail us at aboutelevators@gmail.com
Very nice
Thanks
what about the overhead size for MRL elevators?
Depends on speed, but mostly 4.5 - 4.8 m
I have a space of 4 * 4.7 ft.. is it possible to install a lift in this space?
Please mail us on aboutelevators@gmail.com
Sir, please provide the how many elevators are required for high-rise buildings
mail us at aboutelevators@gmail.com
what is the wall thickness of lift shaft wall? and will it vary according to different lifts?
Keep it 220 mm on all sides, for RCC Shaft. It did not vary, you can keep it same for floors upto 30 -35
@@AboutElevators but its necessary to provide columns on side right? To support the shaft load? Instead of columns can we opt for 300mm thick wall?
Yes Columns on sides are important. Building load and not be distributed to the shaft normally. BTW this question could be well answered by a RCC Consultant, I'm good at elevators only.
Also, I request share this with your friends and family. And subscribe the channel.
Sir thanks..
Excellent..
How to calculate cabin width and depth and door opening size?
Thank you.
Cabin width and depth depends on shaft size, If you get the shaft size, you can calculate the cabin size easily. Will make a video for that in near future.
Keep supporting.
Great guru knowledge of elevator
Sir I want a detail video on how to make template design for given shaft size by customer.
We will try
Hello Brother, just now Subscribed to your Channel. Will you please tell me : For 40*60 Plot Size : G + 3 Story Building 6 persons lift- Pit Dimensions and Cost and Best Company to buy with minimum maintenance ( DIY ). Thank you. Sai Praveen Cinema. From Telugu States. India
You'll need shaft size of
1. 1550x1550 mm for a Lift with Machine Room above (Pit-1500mm, Overhead 4200mm)
2. 1600x1600 mm for Lift without machine room. (Pit-1550mm, Overhead 4000 to 4200 mm)
Cost:
Local Companies: raging from 5L to 6.5L
Brands (Like thyssenkurpp, OTIS, KONE, Schindler): 7L to 8.5L
If you go with brands, you'll not have to worry about the quality and service for lift.
For getting a good maintenance cost, negotiate the cost for next 3 years at the time of lift finalization.
PS: I can't recommend a brand specifically, but go for one of them who is giving a good price to you according to your budget.
Hope this works for you, for any more info mail me at aboutelevators@gmail.com
Hey! You can now order online from Casper Elevators using this link: mydukaan.io/casper Feel free to call us on +91-8169518932 if you need any help with ordering online. Thank you.
Sir You can connect me if you are in Gurgaon Kone Elevators
sir u have described big size lift... let me know the shaft area fir 2 passanger lift
As per IS and NBC standards, you need to have 5 passenger lift minimum. But there are some 2-3 passenger lifts which you can see on internet. I don't think that need any particular shaft. Terry Lifts and likewise.
Think you
Thanks.
The width you mentioned for shaft size is length or height ?
Width is front length including Door Opening size. Depth is deepness of lift.
@@AboutElevators thank you for the info
HAI SIR LET ME KNOW ABOUT HYDRAULIC LIFT
There is already a video about hydraulic lifts.
Here is a link for you.
ruclips.net/video/6H1-UlsatWA/видео.html
Is it possible for 5.5ft ×4.6ft for 5 person
replied on mail
my shaft size is 4'6'' by 4'6". is it good enough for lift
yes, but you need to build a machine room above your lift shaft.
what about H.P of motor and gear box size as per these standards ?
explation is done for gearless motors. and each motor have different hp & not necessary to consider in this video.
Hello! At what stage of a building construction should we consult a elevator manufacturer?
Hello,
Consult them at the time of plinth and finalize the lift at the time of RCC completion.
SO you get proper advice for shaft building and at RCC completion you need the GAD Drawings to complete the shaft.
if you need to know more, mail at aboutelevators@gmail.com
@Truth n Logic Yes this size is fair enough to accommodate 5 or 6 person lift. for any more doubts you could mail us on aboutelevators@gmail.com
What are specifications/ dimensions for 4 persons lift?
mail us at aboutelevators@gmail.com
6 foot by 6 foot space is enough for 8-10 person lift?
Yes. It is.
PLS SUGGEST DIMENSIONS FOR 4/5 PERSONS
you would need a shaft size of 1500mm (width) x 1500mm (Depth)
please share the reference book
This is from real experience not any book.
Lift for four p er rsons demostic it as cost and contact no.
share your req on aboutelevators@gmail.com
0:49 0:53 0:54
👌👌👌👌
Thanks.
Size of hospital strecher lift
Shaft Size : 1900mm x 2800 mm
Cabin Size : 1100mm x 2200 mm
@@AboutElevators thanks
I want to get more information, How l can contact to you Mr. ? Do you have email adress ? By the way l am mechanical engineer and l am in Elevator business field
Hi Arman,
aboutelevators@gmail.com is my email id. Share your doubts n this, will try to address as much as I can.
Thanks.