Thank You so much brother...I'm having an rtr 200 (2017) that does not having a slipper clutch. Now I feel this is the time to change my regular clutch to a slipper clutch as I'm feeling more confident after watching your video. ❤❤❤
@@ManAndMachines. yes gear shifts are lot smoother with lighter clutch pull and my bike gives 45+ with normal riding conditions.. For better results use motul 7100 10w50..
You would have to check the size of the clutch plate housing. If it is same in size you can surely fit. But I think rtr 160 has a smaller clutch housing.
Hi, As already mentioned by @Nobody's Angel, I doubt the dimension of clutch shaft is same on both the engines. Last time I enquired with TVS service they said the clutch shaft is different.
I have seen our local tvs install the slipper clutch from 200 4v in the new 160 4v and old apache 180. They also said it could be installed in the old 160. It was a direct replacement and it works just as well, if not better. The slipper clutch costs rs.2050, you have to pay for the service charges and also new engine oil as it has to be drained.
acording to parts catalogs of rtr180 and rtr200 4v, they share the same gearbox and input / output shafts part numbers, so its possible the clutch fitment on the 180.
Hi Rakesh, I really try hard to bring these videos. Believe me the interest and appreciation from riders like you fuels up the motivation to make more videos 😊
@@thesportztourer bro I'm also a regular viewer so please tell me can i put the slipper clutch to my apache 160 4v ..? Please reply me I'm waiting for this so long
Hi @The Sportztourer ! Have enjoyed all your videos and it has really inspired me to finally be able to take care of my bike with all the informative videos on your channel. I have a RTR 200 BSVI model and wanted to ask if the clutch lever pulls in towards the grip slightly when accelerating and goes back when you’re off the throttle? I found a few answers online which hinted that it’s a characteristic of slipper clutch systems, just want to confirm if you’ve faced something similar on your RTR or any other bike with slipper clutch. Thanks once again for all the great work, keep it up 👍🏽
and sorry bro i got to mention one more thing can you make a video on swing arm how we can inspect it or change it by our self because i met with an accident got my swingarm pushed towards left side the problem is when i take right corner my mufler got touched to road every time
Hi Akshay, To be honest I am yet to face that. Apart from the adjustment during the first service the cone set was not touched. Have noted your point, will try to make a detailed video in the future 😊
Thanks for the video. One doubt though...Will the slipper clutch will have more wear and tear compared to the regular one considering riding aggressively in same manner in both bikes...What I mean is If i manually matches the rpm in the old fashion, will it makes less/more wear and tear conpared to the SA clutch...thanks
Hi, Point noted, just slipping should not cause excess wear unless we always test the clutch for fun (which applies for regular clutch as well). I will keep a check on this and update accordingly 😊
Hello bro, I own RTR 200 race edition 2.0 which has slipper clutch. I feel my gear shifts are hard and makes noise while shifting. From past 5 days after adjusting my clutch engine is making loud noise once I cross 70. As company claims RTR 200 is best for City rides but mine requires frequent gear changes as compared to ns200. If it is issue relating clutch setting please make a video showing adjusting clutch. I have watched your previous video of clutch setting but not able to do same. Please help.
Bro I too own Apache race edition I just clocked 4500 kms till now and bike is pretty smooth and surely better than NS 200 I too had a confusion before buying Apache but no regrets now Apache is far better compared to other bikes in this segment ..and coming to your issue I too faced this pblm but after first service everything became smooth and character of the bike came out after 1000 kms ..gear shifts are hard because of lack of lubricant and proper clutch adjustment .. service guys ll make it out ..don't worry Bro after oil change u can feel your refined engine. Ride safe !!
@@elishabattiri9048 bro I have already completed 6500kms and done 3 oil changes till now. I lubricate chain every 300 once, even though gear shifts makes noise and bike doesn't rev smoothly.
@@pkrishna1167 bro have you reported this issue in the service centre,if so..what they said? My suggestion is...Ask the service guys to change your clutch cable and should be adjusted with minimum required clutch play...and for your bike performance proper tuning of carburator is required so that you can smoothly rev your bike.. carburator tuning shouldn't be too lean or too rich,it should be optimal..just give this conditions to the service centre I'm sure this tips ll sort out your issues..
@N. Chauhan yup it's a good bike though..but I chose Apache because of engine refinement, reliability,features,mileage,ride quality and practicality ..All these things comes under lesser price compared to fz25😉!! We can tour happily on Apache 200 by crusing btn 80-90 with an average of about 42-45 kmpl!!
Hi, i am using a 10 year old Apache 160 and it is getting hotter after around 50 to 60 km, can you help to cool it? I am regularly changing engine oil.
@@thesportztourer Hi Buddy, Well i follow a lot of ur videos. Great content. I need your help. Problem: I had met with an accident postwhich i have changed the complete fork assembly including telescopic forks , T Stem rod and also Cone set. But even now the Handle Bar feels as tough it is tilted towards right side a little. Could you please help me some info. Quite frustrated with this problem which is not gettint tixed inspite of changing all the parts. RTR 200
Yes, it is a direct swap for both the bikes. Tvs servicing can do it if they want to. Its like replacing the clutch housing and friction plates, but with an upgraded version.
acording to parts catalogs of rtr180 and rtr200 4v, they share the same gearbox and input / output shafts part numbers, so its possible the clutch fitment on the 180.
Nice video. I own TVS Apache 200 4v which doesn't has slipper clutch as of now. My bike is 4 years old ( bought in 2016 June ). Just wanted to know if I can replace my clutch plate with normal ones or slipper clutch.. if I fit slipper clutch then will I face any problems?
Hi, I like your video on the slipper clutch and I am intrigued to have it installed in my discover 125t which is due for a clutch set change. Is it possible to install a slipper clutch in it? It's only an upgrade so that I can preserve the bike better as I have moved on to other vehicles....pls suggest.
Hi Rahul, As a long as the brake pads are from OEM brands we can experiment with them (assuming they are direct fit). In worse case a harder material will eat on your disc plate or a different material can compromise upon braking which should be a matter of concern and changed immediately.
Brother thanks for the long time review Can you assist me with this idea Is that possible to fix the slipper clutch from yamaha R15 V3 to Yamaha fz Version 2.0 Or can i use TVS RTR 4V slipper clutch to Yamaha fz Version 2.0
Hi illan, The FZ V2 uses a different clutch housing and shaft so this won't fit. R15 V3's slipper clutch can be installed on V2 but yet to find if it's a direct fit on FZ V2.
Hi, some of our local mechanics have installed the slipper clutch from R15v3 to the FZ25 and FZ16 series bikes. However, they need a little bit of machining and tinkering to get it placed properly. Feedbacks from guys who have installed the slipper clutch in FZ25 has said- clutch and gear shift is much, much smoother, pickup from 1st gear seems a bit down but not so much that it makes a difference, but improves considerably from 2nd gear onwards. ruclips.net/video/Mlhc8KKtwlQ/видео.html
bro i have apache 200 2017 model without abs in chandigarh...at that time abs model was not available..but the dealer told me that abs can be fitted later also as tvs has provided space for it...but now they are saying that abs can't be fitted? so can it be done in other tvs agenies in bigger cities like delhi?
bro i just wana know after installing slipper clutch on rtr 200 while while doing engine breaking does rear tyre get locked or not i think you have not mentioned in video or i haven't seen video properly 😁
yes...i have watched your video...but when i visited the tvs service centre in Mumbai they told me it requires some alternation to fit the slipper clutch. that's why I asked about it.
The Sportztourer Sir I have successfully installed the slipper clutch in my 160 4v with the help of your video. I am not facing any problem if you want I can provide you images
i would like to install this on my pulsar rs 200... do you think will it fit on pulsar? i need some feedback sir... pulsar rs200 also have 6 plates on the stock clutch assembly... hope this will fit... where can i buy this ? by the way im from the philippines
It can't because of the way of the engine setup in pulsar, pulsar is a commuter so the bajaj mechanics has cut of any room for installing any other clutch plate
Hey Buddy, I wanted to say this a long back but couldn't. Can you do a video on gear ratios in motorcycles. How changing the sprocket setup changes the power delivery and other stuffs like impact on bottom end torque, acceleration, mid range, top end power, fuel efficiency. If possible, you can try changing sprocket front may be in apache rtr 200 to check the performance in the above-mentioned aspects. I think this will be a good topic from engg. point of view also. What say...
i have installed slipper clutch in my rtr 200 4v after that my bike mileage goes down and pickup also decreased so please suggest what to do? thank you.....
Thank You so much brother...I'm having an rtr 200 (2017) that does not having a slipper clutch. Now I feel this is the time to change my regular clutch to a slipper clutch as I'm feeling more confident after watching your video. ❤❤❤
Awesome video as always. Being a mechanical engineer & an automotive enthusiast, it's always satisfying to watch your videos.
Thanks a lot Chinmay, means a lot to me 😊
@@thesportztourer , I can watch your videos again & again, but I will never get bored 😊😊
@@thesportztourer can you do a video regarding hand guards for RTR 200?
I have installed slipper clutch on my 2012 r15 v2 it works great..😊
Any issues after installation??
I'm planning to install on my Fzv2
@@ManAndMachines. no issues sir.
@@rajathari3536 any changes in gear shifting or mileage?
@@ManAndMachines. yes gear shifts are lot smoother with lighter clutch pull and my bike gives 45+ with normal riding conditions.. For better results use motul 7100 10w50..
@@rajathari3536 how much mileage before installing slipper clutch?
Dear,your work is great.i want to know can I install slipper clutch to rtr 160
Which engine oil would be best for 200 4v? Grade please
Bro go for Motul 10w 40 7100 or 300v
Better to go motul 7100 or motul 300v grade 10w40 for excellent performance
@@KandukuriTeja bro I've ridden 4500 kms till now ..so can I go for this ( motul 7100 10w 40 ) oil BTW I own Apache race edition
Yes you can feel the change
in service center they putting oil called synthetic oil, is that is good or not ??
after watching your video I have installed slipper clutch in my 160 4v
tafheem salahuddin, did you install?? How it been?
That's great!
How is your experience?
Really ???
The Sportztourer
for first few kms I was facing shifting issues.Past 100 kms clutch was butter smooth.
@@tafheemsalahuddin4438 is it suits 1604v?
Thanks for clearing air around Engine Breaking. My CB350 rocks in-built Slipper clutch. Learnt something through the video ✌️
Brother , can i fit this tvs 200 4v slipper clutch into tvs rtr 1604v bs6 model?
Hi bro can we install this in pulsar 220, 2016 model
Please let me know
Can i install it on my apache 1604v. And how much does it cost?
Cost is around 2500/-
@@EOW919 but can i install it in my 1604v?
@@DarkForestAllinone have you installed or not
I also got this upgrade but now it feels difficult to put the bike in neutral. Any one else facing something similar?
Does We install this slipper clutch in Apache 160 4V
You would have to check the size of the clutch plate housing. If it is same in size you can surely fit. But I think rtr 160 has a smaller clutch housing.
Hi,
As already mentioned by @Nobody's Angel, I doubt the dimension of clutch shaft is same on both the engines. Last time I enquired with TVS service they said the clutch shaft is different.
I have seen our local tvs install the slipper clutch from 200 4v in the new 160 4v and old apache 180. They also said it could be installed in the old 160. It was a direct replacement and it works just as well, if not better. The slipper clutch costs rs.2050, you have to pay for the service charges and also new engine oil as it has to be drained.
acording to parts catalogs of rtr180 and rtr200 4v, they share the same gearbox and input / output shafts part numbers, so its possible the clutch fitment on the 180.
How did u change the Slipper Clutch without changing the Housing... The housing was diifferent in Slipper Clutch
Is there any options for avenger 220 street 2016 ??
Please help me out. I want this mod to be done on my bike.
Can I install on my cbz Xtreme 2008 model plz reply
😍 They must hire you bro!
Ha ha ha.. this is a big compliment for me 😊
Hi this Mahesh from Chennai,
In my RTR 200 can I install slipper clutch
Bro plss vlog regularly, we are waiting for your videos
Hi Rakesh,
I really try hard to bring these videos. Believe me the interest and appreciation from riders like you fuels up the motivation to make more videos 😊
@@thesportztourer can we install slipper clutch on RTR 160 fi 4v
@@thesportztourer bro I'm also a regular viewer so please tell me can i put the slipper clutch to my apache 160 4v ..? Please reply me I'm waiting for this so long
@@thesportztourer can we install slipper clutch in bs4 pulsar 220f
Best information about Slipper Cluch.....
Wow!! Thank you for the vid 👍...can i install it on my xpulse4v???
Hi @The Sportztourer ! Have enjoyed all your videos and it has really inspired me to finally be able to take care of my bike with all the informative videos on your channel.
I have a RTR 200 BSVI model and wanted to ask if the clutch lever pulls in towards the grip slightly when accelerating and goes back when you’re off the throttle? I found a few answers online which hinted that it’s a characteristic of slipper clutch systems, just want to confirm if you’ve faced something similar on your RTR or any other bike with slipper clutch.
Thanks once again for all the great work, keep it up 👍🏽
and sorry bro i got to mention one more thing can you make a video on swing arm how we can inspect it or change it by our self because i met with an accident got my swingarm pushed towards left side the problem is when i take right corner my mufler got touched to road every time
I bought an N160 6 months back and if i have to do same mod which sleeper clutch assambly should i get?
Is it possible to install on honda sp125 bs6. I dont want to decrease my uelefficiency milage instead want a smooth gear shifting.
Make video on cone set problem and solution.....for apache 200
ball bearing issue in my apache
Hi Akshay,
To be honest I am yet to face that. Apart from the adjustment during the first service the cone set was not touched. Have noted your point, will try to make a detailed video in the future 😊
Hey please reply i have sf 250 can I swap slipper clutch assembly with bajaj n250
Thanks for the video. One doubt though...Will the slipper clutch will have more wear and tear compared to the regular one considering riding aggressively in same manner in both bikes...What I mean is If i manually matches the rpm in the old fashion, will it makes less/more wear and tear conpared to the SA clutch...thanks
Hi,
Point noted, just slipping should not cause excess wear unless we always test the clutch for fun (which applies for regular clutch as well). I will keep a check on this and update accordingly 😊
Can we install this in 160 4V ?
My question is same bro
Bro, your videos are too technical for us to enjoy 🤯
Ha ha ha... Now I get the reason behind the super slow growth of this channel 😅
P.S: I hope you are enjoying your 200 4V 😊
Can u tell me from where to buy it in pune coz I tried in kk TVS and The Shelar tvs but not able to find it.... please need to change it urgently
Rushabh tvs or try kalamkar tvs
i'm using suzuki gs150r 2011 model, is there any possibility of installing slipper clutch to my bike, if yes kindly suggest
Thanks buddy! You are Champ 😀
It's a joy to read that 😊
Thanks Rishabh!
Hello bro, I own RTR 200 race edition 2.0 which has slipper clutch. I feel my gear shifts are hard and makes noise while shifting. From past 5 days after adjusting my clutch engine is making loud noise once I cross 70. As company claims RTR 200 is best for City rides but mine requires frequent gear changes as compared to ns200. If it is issue relating clutch setting please make a video showing adjusting clutch. I have watched your previous video of clutch setting but not able to do same. Please help.
Bro I too own Apache race edition I just clocked 4500 kms till now and bike is pretty smooth and surely better than NS 200 I too had a confusion before buying Apache but no regrets now Apache is far better compared to other bikes in this segment ..and coming to your issue I too faced this pblm but after first service everything became smooth and character of the bike came out after 1000 kms ..gear shifts are hard because of lack of lubricant and proper clutch adjustment .. service guys ll make it out ..don't worry Bro after oil change u can feel your refined engine.
Ride safe !!
@@elishabattiri9048 bro I have already completed 6500kms and done 3 oil changes till now. I lubricate chain every 300 once, even though gear shifts makes noise and bike doesn't rev smoothly.
@@pkrishna1167 bro have you reported this issue in the service centre,if so..what they said? My suggestion is...Ask the service guys to change your clutch cable and should be adjusted with minimum required clutch play...and for your bike performance proper tuning of carburator is required so that you can smoothly rev your bike.. carburator tuning shouldn't be too lean or too rich,it should be optimal..just give this conditions to the service centre I'm sure this tips ll sort out your issues..
@N. Chauhan yup it's a good bike though..but I chose Apache because of engine refinement, reliability,features,mileage,ride quality and practicality ..All these things comes under lesser price compared to fz25😉!! We can tour happily on Apache 200 by crusing btn 80-90 with an average of about 42-45 kmpl!!
@N. Chauhan yes bro fz25 has more torque and Apache too have enough tourque to ride over Ghats easily...if price doesn't matter then go for Fz25 👍
Can i modify slippers clucth on apache 1604v.?? Please tell me anyone
Does my Rtr 200 2018 model comes with Slipper clutch pre installed ?
I have rtr 200 white version 1 can i install slipper clutch and can you please tell me how much does it costs
can we install slipper clutch in rtr 160 4v
Hi Manoj,
As per the information from TVS service the clutch shaft dimensions are different on the 160 4V and 200.
Hi, i am using a 10 year old Apache 160 and it is getting hotter after around 50 to 60 km, can you help to cool it? I am regularly changing engine oil.
Hi,
Have you checked the air filter and sparkplug. Make sure the chain is adjusted for correct slack. Finally you can tune your carb accordingly 😊
Can I install slipper clutch in my hornet ?
Hi,
The clutch assembly on the Hornet is a bit different so this won't fit.
@@thesportztourer Hi Buddy, Well i follow a lot of ur videos. Great content. I need your help.
Problem: I had met with an accident postwhich i have changed the complete fork assembly including telescopic forks , T Stem rod and also Cone set. But even now the Handle Bar feels as tough it is tilted towards right side a little. Could you please help me some info. Quite frustrated with this problem which is not gettint tixed inspite of changing all the parts.
RTR 200
Sir I found some difficulty in gear shifting after installing slipper clutch to my 160 4v
It can also fit in Apache RTR 160 OR 180????
Plz reply because i am also planning to install in bike
Hi,
As per the information from TVS service the clutch shaft dimensions are different on 160/180 and 200.
Yes, it is a direct swap for both the bikes. Tvs servicing can do it if they want to. Its like replacing the clutch housing and friction plates, but with an upgraded version.
acording to parts catalogs of rtr180 and rtr200 4v, they share the same gearbox and input / output shafts part numbers, so its possible the clutch fitment on the 180.
Bro please suggest any good mechanic for Apache in Mumbai..🙏🙏
Slipper clutch does a grt job actually...its very much helpful....plz post the installation video of it....
Hi,
Here is the installation video: ruclips.net/video/Vxyz4GVt9i8/видео.html
Nice video. I own TVS Apache 200 4v which doesn't has slipper clutch as of now. My bike is 4 years old ( bought in 2016 June ). Just wanted to know if I can replace my clutch plate with normal ones or slipper clutch.. if I fit slipper clutch then will I face any problems?
Can you please post an video on abs installation on apache200 4v from abs model to non abs fi model??
Hi Ashiq,
I would suggest you to have a look at this video: ruclips.net/video/WgWusoipC0U/видео.html
Hi, I like your video on the slipper clutch and I am intrigued to have it installed in my discover 125t which is due for a clutch set change. Is it possible to install a slipper clutch in it?
It's only an upgrade so that I can preserve the bike better as I have moved on to other vehicles....pls suggest.
I want to install it to my honda xblade plz suggest which one to go for..
Hi Chayan,
As far as I know right now slipper clutch is not available for Xblade.
Hi Bro,
Can we install slipper clutch in gixxer sf 150 2016 edition?
Hi! Can you do it only for rtr200 or even for any bike?
How can I find slipper clutch online? Would you please help me.
Sir can i use bosch brake pads instead of tvs brake pads...as tvs brake pads have copper ratio more n its causes squeaking sounds
Hi Rahul,
As a long as the brake pads are from OEM brands we can experiment with them (assuming they are direct fit). In worse case a harder material will eat on your disc plate or a different material can compromise upon braking which should be a matter of concern and changed immediately.
@@thesportztourer thnk u
Top speed of rtr 200 4v???
Hi Sivanesh,
The manual says 127kmph 😊
@@thesportztourer my 160 4v just gone about 130km/h
Sir i have also apache 200rtr non abs can abs install in my bike?
Hey, would like a quick a update on how the slipper clutch long term review
Brother thanks for the long time review
Can you assist me with this idea
Is that possible to fix the slipper clutch from yamaha R15 V3 to Yamaha fz Version 2.0
Or can i use TVS RTR 4V slipper clutch to Yamaha fz Version 2.0
Hi illan,
The FZ V2 uses a different clutch housing and shaft so this won't fit. R15 V3's slipper clutch can be installed on V2 but yet to find if it's a direct fit on FZ V2.
Thanks brother 😊
Hi, some of our local mechanics have installed the slipper clutch from R15v3 to the FZ25 and FZ16 series bikes. However, they need a little bit of machining and tinkering to get it placed properly. Feedbacks from guys who have installed the slipper clutch in FZ25 has said- clutch and gear shift is much, much smoother, pickup from 1st gear seems a bit down but not so much that it makes a difference, but improves considerably from 2nd gear onwards. ruclips.net/video/Mlhc8KKtwlQ/видео.html
is rtr race edition base model does have sliper clutch ?
Can we install slipper clutch into fz25??? Urgent!
Bro ......can we make the front suspension a little softer.....as it is filtering rough road to my arms
Hi Tuhin,
Unless we go for a mechanical change nothing much can be done apart from shifting to lighter fork oil (for damping).
Bro can we install abs in non abs apache 200 i have apache 200.
And i want to install abs in my non abs apache 200.
I am waiting for your reply.
sir which bike sleeper clutch you instal in your Apache..
Does the Same clutch will fit for RTR 160 4v model...
How to install slipper clutch in duke 200 bs6
can i used this in biker china cg 200cc?
Bro from past 2yrs am facing gear sensor issue in my RTR 200,they changed around 6to 7 sensors still the issue is there?
Can you just that this setup will work on rtr 160-180 engines...that would be a great help
He concluded it with mentioning that this wasn't a beneficial modification.
Hi Surojeet,
Last time I enquired TVS service said the clutch shaft dimensions are different on 160/180 and 200 so this probably won't fit.
@@thesportztourer thanks for enquiring bro. I love you videos.. informative on point.. keep making them😊😊😊
Can I use it in ns200 n which bike clutch u r using
Hey. Does it also increase chain set life for spirited riders.
Brother the clutch plate of 160 4v and 200 4v is sams
I have to put slipper clutch in 160 4v
Superb, please please review 160 4v 🙌🙌🙌
does you do high speed test before and after installing slipper clutch
Can we fixed sleeper clucth in ns 200 bs3
Can I install this one in my RTR180
i want to install slipper clutch in cb hornet160r need your suggestions..
plz guid me.
Hi Rohan,
Right now slipper clutch is not available for Hornet 160.
Hey can I do this mod in apache 1604v? Please reply....
Can i install it on honda cb300r
bro i have apache 200 2017 model without abs in chandigarh...at that time abs model was not available..but the dealer told me that abs can be fitted later also as tvs has provided space for it...but now they are saying that abs can't be fitted? so can it be done in other tvs agenies in bigger cities like delhi?
Hi Snehul,
I did make a video discussing the same 😊 here is the link: ruclips.net/video/WgWusoipC0U/видео.html
Hello bro can I install slipper clutch in my ns200 ?????
Plz reply bro 🙏
Is it available in tvs service centers...???
Can it also be installed in apache 160 4v
Slipper clutch is also compatible with karizma zmr?
bro i just wana know after installing slipper clutch on rtr 200 while while doing engine breaking does rear tyre get locked or not i think you have not mentioned in video or i haven't seen video properly 😁
Which model #slipper clutch are u used?
Is there any alterations required to replace normal clutch with slipper in RTR 200..??
Hi Vishal,
Here is the detailed video for installation: ruclips.net/video/Vxyz4GVt9i8/видео.html
yes...i have watched your video...but when i visited the tvs service centre in Mumbai they told me it requires some alternation to fit the slipper clutch. that's why I asked about it.
It's a direct fit on RTR 200, No additional alterations required apart from what shown in the video 😊
Hello brother
Can I install the slipper clutch in my 160 4v BS6?
Pls comment
can i install in my apache 1604v
can you answer please
Yes
yes I have already installed on my 4v
Hi,
Last time I enquired about the same TVS service said the clutch shaft is different on the 160 and 200.
The Sportztourer
Sir I have successfully
installed the slipper clutch in my 160 4v
with the help of your video. I am not facing any problem if you want I can provide you images
Bro can u tell me why i my rtr 200 start late if i park it for 1 or 2 hours straight????
How many km on odo?
Hi..suggest a smooth vibration free touring motorcycle..with in 300cc
Mojo or Jawa both under 300cc.
@@nobodysangel5568 Hi thanks i tried jawa...vibrates alot post 80...same mojo... Yamaha FZ250 seems smoother than both mojo nd jawa
@@MadhusudhananRamarajan Yamaha Fazer or FZ25 ABS version would be better.
Hi,
As already discussed the FZ 25 is a really good option and now with ABS it's seems to be a complete package for me.
@@thesportztourer Thanks 👍
Your videos are very informative bro
Thanks a lot Ritan,
Happy to know you found it informative 😊
@@thesportztourer keep going👍
i would like to install this on my pulsar rs 200... do you think will it fit on pulsar? i need some feedback sir... pulsar rs200 also have 6 plates on the stock clutch assembly... hope this will fit... where can i buy this ? by the way im from the philippines
Sleeper clutch can be installed in 160 Apache RTR old model....?
Hi Bikki,
I am yet to personally check that but the authorized service said the clutch shaft is of different dimension on the 200 4V and 160/180.
Wanted to know if slipper clutch can be installed in Pulsar 150 bs6 twin disc. And benefit or drawback on this mod.
It can't because of the way of the engine setup in pulsar, pulsar is a commuter so the bajaj mechanics has cut of any room for installing any other clutch plate
can i install it in duke 200 bs6
Awesome like always 😊
Thanks a lot 😊
Hey Buddy, I wanted to say this a long back but couldn't. Can you do a video on gear ratios in motorcycles. How changing the sprocket setup changes the power delivery and other stuffs like impact on bottom end torque, acceleration, mid range, top end power, fuel efficiency. If possible, you can try changing sprocket front may be in apache rtr 200 to check the performance in the above-mentioned aspects. I think this will be a good topic from engg. point of view also. What say...
May be not 1 video but a series of 2 3 videos of your experience and all if possibl3
Long back I did that on my 180 and had a mixed experience. Let's see if I can do that again.
Thanks for bringing this point up 😊
Can I install it in 160 4v
Please reply buddy?
i have installed slipper clutch in my rtr 200 4v after that my bike mileage goes down and pickup also decreased so please suggest what to do? thank you.....
Hi,
I hope the installation was done right. If everything is mechanically fine then you can get the clutch adjusted.
@@thesportztourer that was installed by senior and experienced tvs service engineer and he said everything is installed correctly....
Nice,
Did you went back to him with the problem? Are you sure it's because of the slipper clutch?
@@thesportztourer ill visit tommorow
What happened then? Did u visit ?
Cost of slipper clutch?
Can I install slipper clutch in Apache RTR 160 4v ?
Hi bro I own a Pulsar NS 200 2018, any slipper clutch that will match it.
Rev Matching = No need of Slipper Clutch.
Hi S P,
Right now slipper clutch is not available for NS 200.
Honda shain ko slipper clutch lgega sir