1; Don't attempt it, 2; don't attempt it, 3; if you really must, use two spinners, one to wind off and one to wind on. 4; don't attempt it. You can buy smaller coils you know.....
So every so often I’ll have a 4000 foot roll of wire. I might be halfway through the roll and all the sudden the loops get tangled amongst each other almost like the bottom coils are trying to pull through the other coils while you are unrolling the role can you explain that? Also, it looks like your fence wire is rolled differently than ours from the top down to the bottom or vice versa whereas our roles seem to be rolled, started on the inside to the outside.
I’ve had that problem before when I’ve had a coil in the Ute for a long time. Usually a good spinner can cope though. That’s when the pro units with a spooling guide pay for themselves. They can cope with discombobulated coils. Interesting about your coiling. Maybe your guys do it on a drum? Our guys do it on a form so that even if you put pressure on the coil it’s top down as it comes off.
Hey Tim, Hows it going? Just a quick question re farm gates. If I was to purchase a 10 foot or 3 metre gate, how much extra do I need to allow between the pine posts for the hinges etc? Regards Shayne, Loch Sport
@@FarmLearningTim ok so putting new paddocks in today, re watched this video and still ended up with the wire not pulling straight, did everything you said with the knots on the top etc and the starter bit got tangled! I give up 🤬🤬🤬
Why did this show up in my feed? Tomorrow I’m actually installing my first fence using one of these wire spinners. Not only is big tech monitoring our activities, they’re reading our minds. LOL
Tim I'm in the USA and you have taught me so much about fencing and I have been a beef farmer for most of my 42 years, thanks.
Thanks mate. Appreciate it.
I’ll second that comment
@Steve Shrader Hi neighbor, I live in south east Ohio.
Your an excellent teacher. Love your videos! thanks
Thanks for the tip of using cable ties to hold rolls of wire together and so know which way is up. Great idea!
Starting a fence job and I think you just saved me some big head aches!!! thanks Nashville Tn USA
As always great info
great tips mate nothing worse than a jammed spinner or a spinner flying off the back of the ute at speed stay safe mate
Good day Tim, thank you for the video. Do you have any advice on how to divide a coil into 2 coils (besides don’t attempt it! 😀)
1; Don't attempt it, 2; don't attempt it, 3; if you really must, use two spinners, one to wind off and one to wind on. 4; don't attempt it. You can buy smaller coils you know.....
So every so often I’ll have a 4000 foot roll of wire. I might be halfway through the roll and all the sudden the loops get tangled amongst each other almost like the bottom coils are trying to pull through the other coils while you are unrolling the role can you explain that? Also, it looks like your fence wire is rolled differently than ours from the top down to the bottom or vice versa whereas our roles seem to be rolled, started on the inside to the outside.
I’ve had that problem before when I’ve had a coil in the Ute for a long time. Usually a good spinner can cope though. That’s when the pro units with a spooling guide pay for themselves. They can cope with discombobulated coils. Interesting about your coiling. Maybe your guys do it on a drum? Our guys do it on a form so that even if you put pressure on the coil it’s top down as it comes off.
What brand spinner is this. I like how it is built.
Fenceline Solutions mate. They're about to release a new upgraded model.
Hey Tim, Hows it going? Just a quick question re farm gates. If I was to purchase a 10 foot or 3 metre gate, how much extra do I need to allow between the pine posts for the hinges etc? Regards Shayne, Loch Sport
Hey mate. Shooting a couple of videos on gates in the coming weeks. Look out for that. I’ll try to include your question!
G'day Tim , just want to know what is the name of that wire spinner with guide?
It’s a fenceline spinner. Check out timthompson.ag for a full review and links to the product
@@FarmLearningTim Will do, thanks mate
Safety googles have kept my eyes in their sockets on many an unexpected occasion.
Wish I had found this video a month ago when I ended up throwing the wire out after 2 hours of trying to untangle it
😂
@@FarmLearningTim ok so putting new paddocks in today, re watched this video and still ended up with the wire not pulling straight, did everything you said with the knots on the top etc and the starter bit got tangled! I give up 🤬🤬🤬
@@hollyberry4749 new roll or previously tangled???
@@FarmLearningTim new roll, knots facing one way, label facing the other 😫 got 8500 metres of paddocks still to do and fed up! ☹️
@@hollyberry4749 Wire spinner??
Why did this show up in my feed? Tomorrow I’m actually installing my first fence using one of these wire spinners. Not only is big tech monitoring our activities, they’re reading our minds. LOL