The tech videos are coming along great. Nothing else like them on RUclips. It's great to see Henry Winkler hired Matt Damon to work on Internationals. 👍💪
This is excellent information! Is there any way to get a PDF or something high resolution of the wiring diagram? For some reason, even though I'm viewing at 1080p, the resolution is still blurred and hard to read the text/handwriting.
Gauges are adjustable on the back if you remove them from the pod/holder - there are adjustments for the low/high point of each gauge by moving small toothed arms that control the needle. This is helpful if your gauges work but are inaccurate. Also - glass faces look a lot better than plastic ones - any shop can cut glass for you. Go thicker than 3/32". 1/8" is good. On Etsy you can buy gauge faces with IH logo on them if that interests you.
Another note that I learned the hard way is if the three blue wires are disconnected from the voltmeter gauge. The truck won’t crank and you’ll have no lights.
How bout we do a complete rewire series, that goes off the original harness. Come on people. Do some stuff that's needed. Every forum I see is about wiring. And still no video. Help a shade tree mechanic out
Great Video, I was wondering going in why the bent plastic lense. I was going to cut the center out and put glass in, but like your idea better. I will cut the lenses in glass and refresh the needles and put new bulb holders in, you should mention them as well. One other Knit picky thing is the use of the word "Basically", it's an un needed filler word. It is way over used today. Ycats
Did i miss him( pulling out) the gas oil temp and volts gaged my wires are not were they should be and a look at one would help ..? Is there video about the gages I've stated.?
![Tee Grizzley - Robbery 8 [Official Video]](http://i.ytimg.com/vi/34_vkNV6wrU/mqdefault.jpg)
PARTS FOR YOU!
Accessory Gauge Lens - anythingscout.com/products/gauge-lens?_pos=2&_sid=c381dc275&_ss=r
Speedometer Gauge Lens - anythingscout.com/products/speedo-gauge-lens-scout-ii?_pos=3&_sid=c381dc275&_ss=r
Lucky for me, this video exists, having problems with temp, oil gauge, and right turn indicator
From the sketch are the ports labeled backwards? Almost like sitting in the driver seat perspective.
Keep the tech tutorials coming. I would like to see a tutorial for a grill swap on SII.
We'll add it to the list!
The tech videos are coming along great. Nothing else like them on RUclips. It's great to see Henry Winkler hired Matt Damon to work on Internationals. 👍💪
Lol. Spot on Ramiro.
This is excellent information! Is there any way to get a PDF or something high resolution of the wiring diagram? For some reason, even though I'm viewing at 1080p, the resolution is still blurred and hard to read the text/handwriting.
Thanks! Would also be nice to see a replacement part or tutorial on fixing the voltage regulator and a resource for getting a speedometer rebuilt.
For the needle paint... get TRAFFIC CONE nail polish at Walmart... for real.
Gauges are adjustable on the back if you remove them from the pod/holder - there are adjustments for the low/high point of each gauge by moving small toothed arms that control the needle. This is helpful if your gauges work but are inaccurate. Also - glass faces look a lot better than plastic ones - any shop can cut glass for you. Go thicker than 3/32". 1/8" is good. On Etsy you can buy gauge faces with IH logo on them if that interests you.
Awesome! Thank you guys!
Thanks for the continued support Eric! Love seeing your comments!
Another note that I learned the hard way is if the three blue wires are disconnected from the voltmeter gauge. The truck won’t crank and you’ll have no lights.
Great job...very helpful. I’m going to order my new glass tomorrow.
Thanks for the feedback Richard! We've linked the glass in the description and the pinned comment, we appreciate your support!
Love these tech tips, new scout owner over here.
Thanks Griff! Stoked to hear you got yourself a Scout. keep the dream alive!
Love these videos! Please upload more!!! :D
These Tech tips are so good. I need more.
How bout we do a complete rewire series, that goes off the original harness. Come on people. Do some stuff that's needed. Every forum I see is about wiring. And still no video. Help a shade tree mechanic out
Hey Jeremy, its on the list of to-dos!
@@anythingscout awesome. Love the channel. Y'all have helped me tons so far. Keep it up. Love from mississippi.
Nice tutorial! Digging the channel
We appreciate it Frank!! Thanks for checking us out!
Great Video, I was wondering going in why the bent plastic lense. I was going to cut the center out and put glass in, but like your idea better. I will cut the lenses in glass and refresh the needles and put new bulb holders in, you should mention them as well.
One other Knit picky thing is the use of the word "Basically", it's an un needed filler word. It is way over used today.
Ycats
Very informative. Thank you.
Great Video! Very informative thanks. What shade of orange did you use?
Where did you get your leather dash pad? I need a new one.
Did i miss him( pulling out) the gas oil temp and volts gaged my wires are not were they should be and a look at one would help ..? Is there video about the gages I've stated.?
Is there a way to fix the internal of the gauge if it won’t even move the needle when grounding the fuel sending line when the gauge has power?
Hold on, the one you were working on was an 85 MPH speedo and the one you installed was a 100 MPH Speedo, I call shenanigans.
Haha, we utilize the same magic those cooking shows use when they put a casserole in the oven and 10 seconds later pull one out fully cooked.