Bar clamps | glue wood without expensive tools | homemade tools
HTML-код
- Опубликовано: 5 май 2023
- 🪚🪚🪚 Homemade bar clamps for woodworking. The easiest way to glue boards. Cheap and quickly made. 🟪🟥🟧🟨🟩🟦 Glue clamps are just expensive, without it does not work and therefore I have made myself some. I have already tried several variants, these work very well and reliably and the little bit of material that you need, everyone has lying around at home.
Развлечения
Eddy Woodworks channel in Brazil suggested your channel. The simple clamps are ingenious!
I came through Eddy's channel. Very good clamp, thanks for sharing
it’s great to watch such passionate work come out of a small workshop❤
Thank you!
I like how you used the f-clamp to lock the wedges. Pretty clever. I made some similar clamps. I made the wedges such that one had a hole in it and the bolt passed through it so it wouldn't slide. Then I could just tap the other wedge home with a mallet or small hammer. Your use of the f-clamp pretty much removes the reason I made the more complicated wedges. Good stuff. Looking forward to your other videos.
Thank you Very mich Sir.🎉
Wonderful clamps.
ЛАЙК!!! З протилежної від клинів сторони, під болти треба підкладати рейку, щоб не було слідів від болтів. УСПІХІВ.
Дякуємо за підказку!
Молодец!Спокойно, уверенно и красиво.Толковое приспособление, надо обязательно повторить!Творческих успехов!😊
Но для изготовления этих приспособ, она использовала дорогие инструменты.
Дешевле купить трубные струбцины.
Schaue mir deine Videos schon länger an , einfach und genial , mach weiter so.
Gotta make make m a few!!! Solves all kinds of issues over pipe clamps! Great job!😅
Very clever. I am impress
Ottimo| Il migliore in assoluto nelle tre dimensioni spaziali ottenendo una ottima e potente presa, il tutto ad un costo modesto unito alla notevole lunghezza degli attrezzi
. Complimenti all'intelligenza!
lindo projeto.
obrigado pelo compartilhamento.
cheguei ao seu canal (e me inscrevi) por indicação de Edy, do Brasil.
Abraços
Excellent idea! 👍I'm going to make some. Thank you! (By the way, it seems your workshop is equipped and organized in an intelligent, original, and skillful way!) 💜
great idea!
dang it! looks like i need 2 make a bench top planer, a drill press, man i'm gonna be a while
Who is this drill ninja? She is quietly killing the greedy clamp industry.
😁
Very nice 👍
You shouldn't have a gap behind the router bit on your table. Move the fence up so you can slide the workpiece along it. As for the clamps, use thicker tapered stock for greater clamping force. Looks good though.
She is using a ball bearing bit so it does not matter that she had a gap between the fence and workpiece. She probably did not want to waste time by take the fence completely off or more likely she wanted to use the vacuum which was attached to the fence.
Very logical
Bravooo
Une vieille méthode de menuisier mais trop mal connue des bricoleurs. Je me suis fait le même système il y a de nombreuses années. Merci à toi pour nous partager cette astuce.
Merci beaucoup pour ton gentil commentaire !
Mit was behandelst du die Klemmen damit sie nicht mit ankleben wenn der leim beim zusammenpressen austritt.
Ich hab Möbelwachs und Öl (nichts Spezielles) - funktioniert mit beidem.
Нравится когда женщины делают что то хорошо
Szuper
What kind of wood did you use for these impressive clamps? Very nice work.
Tanks! I used spruce, softwood. For me the cheapest solution.
Bello e funzionale. Una curiosità: perché quando hai usato lo svasatore sul trapano c'erano 2 mandrini?
Grazie! Per poter cambiare più rapidamente. Basta che lo infili.
Ciao sono un nuovo iscritto, mi piace perché i video spiegano dettagliatamente tutto quello che fai....BRAVA!
Farai un video per costruire una morsa da banco? Grazie buona giornata....
Ciao, grazie mille! C'è un video chiamato "morsa di legno" (spero sia tradotto correttamente).
Very clever! Could you come with a jig to replace the drill press? Thank you.
Thank you very much! You don't need a drill press for the bar clamps. A cordless screwdriver is sufficient.
Super kleines Video weiter so. Wie zufrieden bist du den mit den Scheppach Hobel 😂😂😂. GLG Mike aus Salzburg
Danke! Hallo Mike, der Hobel ist ok. Wenn ich geahnt hätte, dass ich so viel hobeln werde, hätte ich mir aber einen anderen zugelegt. Denn er hat schon seine Eigenheiten, die einem für 100 € mehr womöglich erspart bleiben. Was denkst du denn über den Hobel, weil du 'lachst'?
Hello. Naja ich hab ich ihm mir schon paar mal angeschaut kann mich aber nicht entscheiden ob ich ihm zulegen soll. Welchen würdest du empfehlen. GLG Mike
Hello. Naja ich hab ich ihm mir schon paar mal angeschaut kann mich aber nicht entscheiden ob ich ihm zulegen soll. Welchen würdest du empfehlen. GLG Mike
Hello. Naja ich hab ich ihm mir schon paar mal angeschaut kann mich aber nicht entscheiden ob ich ihm zulegen soll. Welchen würdest du empfehlen. GLG Mike
Hello. Naja ich hab ich ihm mir schon paar mal angeschaut kann mich aber nicht entscheiden ob ich ihm zulegen soll. Welchen würdest du empfehlen. GLG Mike
Show
Чудово, просто, геніально. Дякую. Привіт з України, де дияволи чинять геноцид Української Нації на очах у всього жорстокого світу.
🗜️😲
The first thing you did is use an expensive tool 🤔
Thanks for the tip. Sanding by hand with sandpaper is perfectly adequate.
Sorry 🔨
Допоможи собі сам.
c'est d'un ridicule de cacher la marque de ta dégau..!!