Stay tuned for more R32 videos, be sure you subscribe and done miss anything! I have filmed ~ Tie rod end replacement and testing, brake replacement, seat belt warning disable, over head console replacement, tag light replacement, and thermostat and housing. Later this week will be springs and shock absorbers :)
Hi there. I've been watching the videos for awhile now, especially more so since i bought my 20th AE gti, but im running into bit of an issue. Since i bought the car, initially inspecting it the problem wasnt there because he drove the car to meet me, and it was warm and up to temp when i looked at it. Drove it 4.5 hours home, no real issues other than a CEL for the o2 sensors because of the aftermarket exhaust stuff. BUT back to the temps. Warming the car up is a pain. it will idle okay but then itll start going from -20hg to -10hg on the boost gauge and the whole car will be super jerky. just sitting there at idle. I know you're not supposed to drive it til its warmed up, but i tried moving it in the driveway last night and when i put it in reverse, and tried to back up, the whole car bogged down and didnt really wanna move.. i have a video of the -20 to -10 thing too if you maybe wanted to see that? My best guess is there is a vacuum leak SOMEWHERE. but that doesnt make sense at the same time because it only happens when the car is cold?? anyways.. I love the videos, You are great at what you do! Any help is appreciated though haha.
HumbleMechanic hey hope all is well I’m having this issue where reverse will go in without pressing down making first gear really hard to find. I’m a ford tech owning a VW Jetta tdi manual trans. Any idea of what it can be?? I replaced the friction slider since that was worn out but still having the issue. Pls let me know what you think it may be. Thanks in advance
I'm just typing this comment to attest that, impossible as it seems, the difficult bushing can be installed without drilling the metal case. The Humble mechanic said in one comment that he was able to do it with a screwdriver, unfortunately that's all he said as far as I know. I don't know how he did it exactly, but gave me the confidence to try it myself. I did it in the following way (excuse my poor English): I installed the bushing in the shifter applying some vaseline, then inserted the shifter end inside the loop of the cable (with more vaseline). Now comes the step where I departed from the official dieselgeek procedure: I opened the snap ring with snap ring pliers, I put a little nut to lock the snap ring in an opened position (you can use whatever you want, I just happened to have a small nut near me), I glued a piece of sturdy wire to the nut and bent the wire in the shape I needed to insert it from above, along the shifter. Then it's just a surgery game, you'll need patience here. You need to insert the snap ring on the bushing, almost blindly, (I put a flashlight on the other opening of the shifter metal case, where you access the side-to-side bushing). Make sure the cable is completely pulled in the bushing or the crease where the snap ring must sit won't be accessible. I had to insert the snap ring with its opening facing down, because there is no room otherwise. Once you think the snap ring is in place, you give the wire a firm push downwards to remove the nut and lock the snap ring in the bushing. Insert your finger through any of the openings and make sure the snap ring is well positioned and won't fall off. It should spin on the crease of the bushing. If it doesn't, try to push the ring inside with your fingers or a screwdriver, it could be only partially inside the crease. It's a good idea to practice a few times outside the car, with the wire and the shifter with the bushing installed. If you're not able to insert the snap ring in the bushing using the wire-nut thing, don't even try to do it inside the shifter case. Good luck!
I am so grateful that you're creating content for those of us who drive MK4's! While there may be copious videos on youtube of them, the majority pale in comparison to the caliber of yours :)
This is so helpful for someone who wants a conceptual understanding of how the linkage works. I have a GT3 that's started to have a lot of slop, and this has helped so much understanding what was wrong.
tuned in and ready for mo.:Re. If I watch enough of these R32 series vids, I'll be able to keep enjoying my' 04 GTI for many years to come; however, that sucks cuz I really want a good excuse to buy a '18 GSW. No need in getting rid of a perfectly good, capable car w/the only thing going against it is iits age (14yo) and it still has all of its original bushings. Other than that, there is nothing wrong w/the car to warrant a replacement and endure another car payment.
This mkiv project of yours is costing me a lot of money! Every time I watch an R32 vid I find something else I want to rehab on my mkiv. Already have the Sigma 5 installed and just bought the DG First Gear Getter to clean up the S2S movement (the other bushing are still good) that will be installed when I replace the brake cables if it ever stops snowing here. Gonna pick up a set of those Tyrolsport bracket bushing to finish the job as well.
Gonna have to try this. Picking up a yellow 20th Anniversary GTI this Friday. The shifter feels decent but I feel like there's some room for improvement. Cars in impeccable shape. No dents, only a couple chips in it. Couldn't find rust on it anywhere. Only downside is no OEM seats. There's no backseat and front seats are Corbeau's. Also has an R Spec front bumper that's vinyl wrapped. It's gonna bit a little work but gonna move it back to OEM and preserve it. I only got to test drive it for a little bit but fell in love with it.
This week I finally got the kit from Dieselgeek and yesterday I changed it. I can confirm what Charles said. IT IS POSSIBLE to do that from the inside of the car without removing box or driling hole. I don't have my own DIY, but if you have some technical knowlige, and you can make some things on your car, you can do it by yourself. Of course you need tools, like snap ring pliers, screwdrivers and other. The worst part was to get off front to back cable from the shifter stick and put the cable on the stick again with new bushings from dieselgeek on it. It is realy tight and it was the hardest part. I put snap ring on that bushing in one take. Other was okey. so IT CAN BE DONE FROM THE CABIN.
Its so great you now have a MK4 now to do DIY on. I have a MK4 TDI and allot of what you do here is transferable, the shifter is one mod and update I have wanted to do. Thanks much for this series !!!!!!! :-)
While driving my GTI 337 iin the street my shifter got stuck on 5 and 6 gear. It just wouldn't move out of that side. I pulled over, popped the hood open, and I managed to move the links out of 5 gear so I went back in and drove it without usimg 5 or 6 gear. It saved me a tow. I'm hoping the issue has to do with these bushings and not the transmission. Thanks for this video.
Just installed a new shifter in my mk4 TDI. I cut a square hole with a Dremel and a bur bit in the passenger side of the shifter box. It was a easy install
@@HumbleMechanic it's ok, it doesn't seem as smooth but I think I need to give it time to break in. And the reverse will take some getting use to. I'm ready to see you get into the TDI world man. Join us on the Facebook TDI group.
I think this is my issue with that mk4 GLI vr6 6 speed I asked you about. I'll be doing this soon. Thanks for the info. The diesel geek videos are really helpful too if anyone hasn't seen them yet.. nice video Charles
Yup - thing is I know how to drive a manual or stick transmission. I've done it on the lower deck of I-93 in Boston. Your left leg gets a workout in that. In fact highways around here are masses of stupidity. Not the roadway themselves but the people on them. Like where I live - I'm near what is called the Viaduct. It's a section of I-95 that connects to RI-146, RI-10 and RI-6. Plus Providence Place Mall on ramps and off ramps. All in a space that's a bit less than a half mile. And people don't know how to merge. Me I throw the signal on and push my way in.
kd1s I used to live in Chelsea and work in Brookline, I feel you on the traffic, especially providence place haha. People out there don’t like to be kind when they’re behind the wheel, you kind of HAVE to be aggressive
Hmm i think i have the answer why my octavia mk1 1.8T is hard to shift in some gears somtime. My shifter is much more sloppier than yours. But my car has been on the roads for 370 000km now. So maby not so strange 😂 one more thing on the To do list! Thanks for the great vids! Greetings form Viktor in Sweden 😊
Getting ready to attempt this repair. Do you have a video of how you were able to get that front to back cable end bushing snap ring on without cutting the hole on the side of the housing? Even with the shifter bearing shell out, there doesn't look like there's enough space to get the 90 degree snap ring tool down under the shift lever?
@@chrisharris7819 Not yet. I tried it, but the opening is really small. I ended up changing the bushing on the other side of the cable and that seemed to help. Here's the video of what I did: ruclips.net/video/GFnce1QljBE/видео.html
I wish that too. But there was no way to get the camera in to see what I Was looking at. Plus most of it was working blind. HAHA. Now that I have an 02J shifter for the GTI, I might take it apart and try to explain it.
@@HumbleMechanic It's right time to explain it how to change these bushings without drilling hole or remove it from the car. I'll do that, when I get the bushing. It would be nice, if you could explain it. Thank you
@@ponteral7023 I assume you completed this job on your VW by now. Can you please talk in detail about how you were able to replace the cable bushings under the shifter housing without drilling through the housing? I understand the basic idea, but do not understand how there's enough space between the stick shifter and the housing to allow installation of the new hardware.
@@RedondoBeach2 I tried for about 2 hours, wasn't working with the snap ring pliers I have. Just drill the hole and save yourself the trouble. I 3d printed a cap to cover the hole
@@TheDemoncaller Thank you. The job seems impossible without drilling a hole in the housing or going underneath and dropping the exhaust and heat shield. Follow up question: what do you like and dislike about the Diesel Geek shifter bushing kit? Also, did you install the Diesel Geek kit on the transmission side of the cables too, and if so, what do you like and dislike about that part of the kit?
what is the name or link to the specific bushing at 2:15 i cant seem to find it on diesel geek or other and also the spring itself it seems difficult to replace can i please get some help ?
Hey Humble, whats your view on DPF, I am looking at a Vauxhall Mokka 1.7CDti and am wondering should I avoid it because of DPF, looking to take it on long drives.
Reason why my vws always broken bloody plastic shifter parts. I got an alfa romeo in for shifter repairs. The cables bushing is shot, the shifter mounting plate in the car is junk. Going to cost £225 for all new oem parts. Customer doesnt feel like he got a bargain anymore
hey man i need your help i hawe a vw golf mk 2 and i get no heating so i thought it was a heater core so i flushed it and checked it with a mechanick friend he says it could be some kind of door filters and i didint get a thing what he said can u help me
Did you repair it with the Diesel Geek bushings and shifter kit? If you did, I'm interested in better understanding how it's possible to replace the shifter cable bushings underneath the stick shift housing without removing the housing and without drilling a hole in the housing. This video briefly talks about it being a difficult job but not much more. Any additional insight from you, Charles or others with experience would be helpful.
I tried to adjust my linkage and after that I can't get 5th and 6th gear anymore. My bushings are shot, do you think because of the degraded bushings my link adjustments are not working out properly causing this issue?
My 2006 VW TDI beetle manual transmission is stuck in gear. The engine runs, but I cannot bring the shifter in neutral position. I was in the fifth gear when it got stuck. I need your help.
As always, keep up with the great content. Curious as to what you think about double stacking short shifters. I have a MKIV R as well and already have the EIP short throw and side to side on top the tranny ( had it on there since I bought it years ago) and it works, I had a little extra $$ a while back when I ordered my adjustable rear control arms and bought a B&M style short throw on a whim since it wasn't terribly expensive. I'm just so used to it now and sometimes forget how long the throw is on a stock VW. I bought the car brand new back in 04 with 17 miles on it and now have 175k+. Now only if I can stop toying with it and get going on my 88 Jetta coupe 2.5 transplant.
HumbleMechanic i have an 03 Audi A6 C5, and over time the dash swollen, just like you have in the R32, near the vent, and near the A pillars. It’s a pain to remove the dashboard, and in my case, all the dashes are like this, and it sucks. And i want to see a way to fix it. Thank you for the reply
Will this work for an 05 nissan altima with a stick shift? Mine is really loose and couldn't find any videos for it. I didn't know if this would be the same or would I have to keep looking.
@@aquillelange4128 For my E39, I had to pull the trans and replace the "shift pin detents", and the "shifter carrier bushings." Check out this excellent DIY: webspace.ringling.edu/~dplassma/bmw_diy/shift_pins/shift_pins.html
My mk5 gti has been having issues shifting into 3rd every one in a while and the shifting is also very sloppy, could this be something to do with the bushings?
Do they fit on a Golf 7 shifter? is there any difference? i mean it looks similar but are they?(Golf 7 2.0 TDI). Cant find any bushing-set for a Golf 7.
Any ideas why my shifter feels loose going in-between neutral and drive ? It's almost like it skips over neutral and goes straight to drive if I don't push the shifter to the side a little, thanks for any help
Does anyone know if these bushings are compatible with the older mk4 style(99.5) shifter? I was on there website but only saw this kit you used here???
Hi, I have Audi A3 8l , 1.6 benzine 2002 model and when I drive half an hour and warm up manual shifter get hard and sometimes doesn’t engage, 1st gear and reverse? Your suggestion really helpful for me.
Hey Charles, quick question for you. Why did you post a link to the bearing shell from FCP euro when it also is included in the Uro tuning link? Are they the same part? Getting ready to do this rebuild on my R32 as well. Cheers
My mk4 doesn't go into 5th..I adjusted the linkages..still no 5th..when I shift in 5th its 3rd gear again..I have a wobbly shifter..do you this this can be the problem?
I recently installed a forge short shift kit. And since I cant seem to shift into 2nd or 3rd without grinding. This is after a stage 2 clutch kit install as well. Bled the clutch. Adjusted the linkage many times. Referring back to the diesel geek video. And still no solution. Would the bushings make a difference in this? That's my next hope at least. If I double clutch I can usually get into 2nd and 3rd without grinding but even then sometimes it's not perfect. I do feel alot of play in side to side motion while the shifter is in any gear. 2013 gti.
Just got the last bushings out of the car, the ones at the transmission mount. Fuck those are such a PAIN. Now two orange bushings left and all can go back in the car tomorrow. :D
Love the video, been watching alot lately and learning! I have a 1999 mk4 GTI but I cant seem to find any brackets or bushings that will fit, because apparently the split is in the year 2000. any ideas? :D
GT's Garage and Tech used Harbor Freight 90s and 45s and had no luck and ended up drilling so it seems the pliers do matter (or he just wasn't patient enough).
my mk iv vr6 has trouble going into 1st gear sometimes but if i drop it in 2nd and put it back into 1st its smooth as butter, could this be a synchro issue or can replacing the bushings solve it? Love these R32 vids btw!
Stay tuned for more R32 videos, be sure you subscribe and done miss anything!
I have filmed ~ Tie rod end replacement and testing, brake replacement, seat belt warning disable, over head console replacement, tag light replacement, and thermostat and housing. Later this week will be springs and shock absorbers :)
Hi there. I've been watching the videos for awhile now, especially more so since i bought my 20th AE gti, but im running into bit of an issue. Since i bought the car, initially inspecting it the problem wasnt there because he drove the car to meet me, and it was warm and up to temp when i looked at it. Drove it 4.5 hours home, no real issues other than a CEL for the o2 sensors because of the aftermarket exhaust stuff. BUT back to the temps. Warming the car up is a pain. it will idle okay but then itll start going from -20hg to -10hg on the boost gauge and the whole car will be super jerky. just sitting there at idle. I know you're not supposed to drive it til its warmed up, but i tried moving it in the driveway last night and when i put it in reverse, and tried to back up, the whole car bogged down and didnt really wanna move.. i have a video of the -20 to -10 thing too if you maybe wanted to see that? My best guess is there is a vacuum leak SOMEWHERE. but that doesnt make sense at the same time because it only happens when the car is cold?? anyways.. I love the videos, You are great at what you do! Any help is appreciated though haha.
HumbleMechanic hey hope all is well I’m having this issue where reverse will go in without pressing down making first gear really hard to find. I’m a ford tech owning a VW Jetta tdi manual trans. Any idea of what it can be?? I replaced the friction slider since that was worn out but still having the issue. Pls let me know what you think it may be. Thanks in advance
Hi,,, do the sloppy gear stick coz the gears not going into gears,,,,, thanks
As top
I'm just typing this comment to attest that, impossible as it seems, the difficult bushing can be installed without drilling the metal case. The Humble mechanic said in one comment that he was able to do it with a screwdriver, unfortunately that's all he said as far as I know. I don't know how he did it exactly, but gave me the confidence to try it myself. I did it in the following way (excuse my poor English): I installed the bushing in the shifter applying some vaseline, then inserted the shifter end inside the loop of the cable (with more vaseline). Now comes the step where I departed from the official dieselgeek procedure: I opened the snap ring with snap ring pliers, I put a little nut to lock the snap ring in an opened position (you can use whatever you want, I just happened to have a small nut near me), I glued a piece of sturdy wire to the nut and bent the wire in the shape I needed to insert it from above, along the shifter. Then it's just a surgery game, you'll need patience here. You need to insert the snap ring on the bushing, almost blindly, (I put a flashlight on the other opening of the shifter metal case, where you access the side-to-side bushing). Make sure the cable is completely pulled in the bushing or the crease where the snap ring must sit won't be accessible. I had to insert the snap ring with its opening facing down, because there is no room otherwise. Once you think the snap ring is in place, you give the wire a firm push downwards to remove the nut and lock the snap ring in the bushing. Insert your finger through any of the openings and make sure the snap ring is well positioned and won't fall off. It should spin on the crease of the bushing. If it doesn't, try to push the ring inside with your fingers or a screwdriver, it could be only partially inside the crease. It's a good idea to practice a few times outside the car, with the wire and the shifter with the bushing installed. If you're not able to insert the snap ring in the bushing using the wire-nut thing, don't even try to do it inside the shifter case. Good luck!
I am so grateful that you're creating content for those of us who drive MK4's! While there may be copious videos on youtube of them, the majority pale in comparison to the caliber of yours :)
With the exception of this channel and a couple of others, i usually stay away from RUclips for mk4 advice haha
Exactly! Its hard to find videos for what you truly need for mk4s.
I'm happy I saw this video. I was able to do all the bushings today without drilling into the side of the shift box. Thanks Charles!!!!
This is so helpful for someone who wants a conceptual understanding of how the linkage works. I have a GT3 that's started to have a lot of slop, and this has helped so much understanding what was wrong.
Diesel Geek is good stuff. Jim Royston is a great guy, and boon to the VW scene.
That was a very well edited video. Lots of information and links to support everything you talked about. Nicely done.
Thank you!!!
tuned in and ready for mo.:Re. If I watch enough of these R32 series vids, I'll be able to keep enjoying my' 04 GTI for many years to come; however, that sucks cuz I really want a good excuse to buy a '18 GSW. No need in getting rid of a perfectly good, capable car w/the only thing going against it is iits age (14yo) and it still has all of its original bushings. Other than that, there is nothing wrong w/the car to warrant a replacement and endure another car payment.
Keep it goin with the R32 DIY. Awesomeness! 👍
This mkiv project of yours is costing me a lot of money! Every time I watch an R32 vid I find something else I want to rehab on my mkiv. Already have the Sigma 5 installed and just bought the DG First Gear Getter to clean up the S2S movement (the other bushing are still good) that will be installed when I replace the brake cables if it ever stops snowing here. Gonna pick up a set of those Tyrolsport bracket bushing to finish the job as well.
You and me both brother. AHAHHAHA
Gonna have to try this. Picking up a yellow 20th Anniversary GTI this Friday. The shifter feels decent but I feel like there's some room for improvement. Cars in impeccable shape. No dents, only a couple chips in it. Couldn't find rust on it anywhere. Only downside is no OEM seats. There's no backseat and front seats are Corbeau's. Also has an R Spec front bumper that's vinyl wrapped. It's gonna bit a little work but gonna move it back to OEM and preserve it. I only got to test drive it for a little bit but fell in love with it.
That’s awesome. The Imola 20th is amazing
This week I finally got the kit from Dieselgeek and yesterday I changed it. I can confirm what Charles said. IT IS POSSIBLE to do that from the inside of the car without removing box or driling hole. I don't have my own DIY, but if you have some technical knowlige, and you can make some things on your car, you can do it by yourself. Of course you need tools, like snap ring pliers, screwdrivers and other. The worst part was to get off front to back cable from the shifter stick and put the cable on the stick again with new bushings from dieselgeek on it. It is realy tight and it was the hardest part. I put snap ring on that bushing in one take. Other was okey. so IT CAN BE DONE FROM THE CABIN.
I am currently working on doing this to my MK5. Could you recommend a pair of snap ring plyers or any other tips you have?
Its so great you now have a MK4 now to do DIY on. I have a MK4 TDI and allot of what you do here is transferable, the shifter is one mod and update I have wanted to do. Thanks much for this series !!!!!!! :-)
While driving my GTI 337 iin the street my shifter got stuck on 5 and 6 gear. It just wouldn't move out of that side. I pulled over, popped the hood open, and I managed to move the links out of 5 gear so I went back in and drove it without usimg 5 or 6 gear. It saved me a tow. I'm hoping the issue has to do with these bushings and not the transmission. Thanks for this video.
I couldn't get the shifter into 1st anymore in my 1.8T swapped Rabbit until I came across this DG kit.
Literally paused the video and bought the shifter rod bushings. I've been trying to figure that slop in my MK6 GTI for ever!
After you install it, let me know what you think.
Will do!
@@MrRALPHs1989 Taking you a long time brotha
Sir thanks to your help I have 2002 Kia pride badly in shifting
Just installed a new shifter in my mk4 TDI. I cut a square hole with a Dremel and a bur bit in the passenger side of the shifter box. It was a easy install
NICE How do you like it?
@@HumbleMechanic it's ok, it doesn't seem as smooth but I think I need to give it time to break in. And the reverse will take some getting use to. I'm ready to see you get into the TDI world man. Join us on the Facebook TDI group.
@matthewlee2686 can you tell me exactly where you cut. Like did you cut it where every one else is cutting a hole at.?
@@JM-jq2sj kind of center of the box on the passenger side
I think this is my issue with that mk4 GLI vr6 6 speed I asked you about. I'll be doing this soon. Thanks for the info. The diesel geek videos are really helpful too if anyone hasn't seen them yet.. nice video Charles
Thanks. And yes their videos are great.
As a whole manual transmissions are simpler. But the amount of bushings is astounding.
yep! All added to give a softer feel AHAH
Yup - thing is I know how to drive a manual or stick transmission. I've done it on the lower deck of I-93 in Boston. Your left leg gets a workout in that. In fact highways around here are masses of stupidity. Not the roadway themselves but the people on them.
Like where I live - I'm near what is called the Viaduct. It's a section of I-95 that connects to RI-146, RI-10 and RI-6. Plus Providence Place Mall on ramps and off ramps. All in a space that's a bit less than a half mile. And people don't know how to merge. Me I throw the signal on and push my way in.
kd1s I used to live in Chelsea and work in Brookline, I feel you on the traffic, especially providence place haha. People out there don’t like to be kind when they’re behind the wheel, you kind of HAVE to be aggressive
Yeah - my friends know me as an aggressive driver. Or as I joke, they tell you drive defensively - I prefer to drive offensively. :)
kd1s can’t say I feel any different haha
Great video!
Yet another thing to add to the list of things to my Jetta once i get the engine reassembled!
you will no regret it!
Great content Bro.I was on the hwy at 75 mph when I noticed my shifting was gone.Luckly , I was close to home.About to hit up Diesel Geek Now.
Solid relevant content
thanks
Hmm i think i have the answer why my octavia mk1 1.8T is hard to shift in some gears somtime. My shifter is much more sloppier than yours. But my car has been on the roads for 370 000km now. So maby not so strange 😂 one more thing on the To do list!
Thanks for the great vids! Greetings form Viktor in Sweden 😊
Great vid thank you!!
you're late about a month.
Fix my problems faster, ass.
:D, seriously though nice video.
HAHAHAHAAH
I would be greatly appreciated if you film the replacement of the shifter components in the mk3 GTI VR6t. thankz
I sure will. I can't wait to get those done too. That will be nice because it's out of the car
+1 on this. Mk3 vr6 syncro would need some work to be done.
Are the mk4 vr6 24v motor the same the mk4 r32 ? Or at least close to similar ? Hard to find videos thanks .😊
Is there something like this for the golf mk3 vr6??
Brilliant! Really helpful.
what is the part number for the TyrolSport bushings for the shifter cable bracket?
The fun just never ends when you drive a mk4 !!!!!#mycarkeepsmesaneandsober!!!
Getting ready to attempt this repair. Do you have a video of how you were able to get that front to back cable end bushing snap ring on without cutting the hole on the side of the housing? Even with the shifter bearing shell out, there doesn't look like there's enough space to get the 90 degree snap ring tool down under the shift lever?
Did you figure out how to do it without drilling a hole on the side of the box?
@@chrisharris7819 Not yet. I tried it, but the opening is really small. I ended up changing the bushing on the other side of the cable and that seemed to help. Here's the video of what I did: ruclips.net/video/GFnce1QljBE/видео.html
Big improvement!
hi @humblemechanic - do you have replacement parts for the MK5 golf? That would be super cool!
Great video Charles. I wish you could have done a DIY doing your method vs drilling the shifter box.
I wish that too. But there was no way to get the camera in to see what I Was looking at. Plus most of it was working blind. HAHA.
Now that I have an 02J shifter for the GTI, I might take it apart and try to explain it.
@@HumbleMechanic It's right time to explain it how to change these bushings without drilling hole or remove it from the car. I'll do that, when I get the bushing. It would be nice, if you could explain it. Thank you
@@ponteral7023 I assume you completed this job on your VW by now. Can you please talk in detail about how you were able to replace the cable bushings under the shifter housing without drilling through the housing? I understand the basic idea, but do not understand how there's enough space between the stick shifter and the housing to allow installation of the new hardware.
@@RedondoBeach2 I tried for about 2 hours, wasn't working with the snap ring pliers I have. Just drill the hole and save yourself the trouble. I 3d printed a cap to cover the hole
@@TheDemoncaller Thank you. The job seems impossible without drilling a hole in the housing or going underneath and dropping the exhaust and heat shield. Follow up question: what do you like and dislike about the Diesel Geek shifter bushing kit? Also, did you install the Diesel Geek kit on the transmission side of the cables too, and if so, what do you like and dislike about that part of the kit?
what is the name or link to the specific bushing at 2:15 i cant seem to find it on diesel geek or other and also the spring itself it seems difficult to replace can i please get some help ?
Hey Humble, whats your view on DPF, I am looking at a Vauxhall Mokka 1.7CDti and am wondering should I avoid it because of DPF, looking to take it on long drives.
I’m trying to figure out what that black piece was by the assembly. Mine is broke. Causing me to not find 5th gear.
Reason why my vws always broken bloody plastic shifter parts. I got an alfa romeo in for shifter repairs. The cables bushing is shot, the shifter mounting plate in the car is junk. Going to cost £225 for all new oem parts. Customer doesnt feel like he got a bargain anymore
Need to do this on my mk4
YES!
hey man i need your help i hawe a vw golf mk 2 and i get no heating so i thought it was a heater core so i flushed it and checked it with a mechanick friend he says it could be some kind of door filters and i didint get a thing what he said can u help me
Hey Charles.
I lost reverse and 2nd because of bad bushings on my shifter box!
Did you repair it with the Diesel Geek bushings and shifter kit? If you did, I'm interested in better understanding how it's possible to replace the shifter cable bushings underneath the stick shift housing without removing the housing and without drilling a hole in the housing. This video briefly talks about it being a difficult job but not much more. Any additional insight from you, Charles or others with experience would be helpful.
I tried to adjust my linkage and after that I can't get 5th and 6th gear anymore. My bushings are shot, do you think because of the degraded bushings my link adjustments are not working out properly causing this issue?
For possible future reference is it the same set up as on my Audi A3 8p? Thank you
watching the play in the shifter before and after... I have this problem badly.. on to the to do list it goes
My 2006 VW TDI beetle manual transmission is stuck in gear. The engine runs, but I cannot bring the shifter in neutral position. I was in the fifth gear when it got stuck. I need your help.
Hi Charles, how did you get the snap ring on without drilling a hole in the side of the box? Where did you sneak the snap ring pliers through?
A long screwdriver and some swear words. Lol
Please, anyone knows the part number at 0:46? Can't find it in the exploded part view
The bell crank or the bushing part? Get a 1st gear getter from Dieselgeek
For the bushing part
What kind of type of grease should we use for knock/shifter, I saw there was one..
As always, keep up with the great content. Curious as to what you think about double stacking short shifters. I have a MKIV R as well and already have the EIP short throw and side to side on top the tranny ( had it on there since I bought it years ago) and it works, I had a little extra $$ a while back when I ordered my adjustable rear control arms and bought a B&M style short throw on a whim since it wasn't terribly expensive. I'm just so used to it now and sometimes forget how long the throw is on a stock VW. I bought the car brand new back in 04 with 17 miles on it and now have 175k+. Now only if I can stop toying with it and get going on my 88 Jetta coupe 2.5 transplant.
Hi, car detailer forced my reverse and now I don't have 5th and 6th, if this can fix my issue?
Damn plastic parts
Make a video about the dash please
gagu112 what are you interested in with the dash
HumbleMechanic i have an 03 Audi A6 C5, and over time the dash swollen, just like you have in the R32, near the vent, and near the A pillars.
It’s a pain to remove the dashboard, and in my case, all the dashes are like this, and it sucks.
And i want to see a way to fix it.
Thank you for the reply
what bolt goes on the shifter cover
Will this work for an 05 nissan altima with a stick shift? Mine is really loose and couldn't find any videos for it. I didn't know if this would be the same or would I have to keep looking.
That loose shifter is about 1/3rd as loose as the one in my BMW...
Damn
Just got an E30 and that thang is loose :') Just out of curiosity, how'd you resolve it?
@@aquillelange4128 For my E39, I had to pull the trans and replace the "shift pin detents", and the "shifter carrier bushings." Check out this excellent DIY: webspace.ringling.edu/~dplassma/bmw_diy/shift_pins/shift_pins.html
Definitely something I need but I don’t have the time and money
Time is the hard one. Money is usually easier to make than time is to have
My mk5 gti has been having issues shifting into 3rd every one in a while and the shifting is also very sloppy, could this be something to do with the bushings?
What is wrong with the 8 people who disliked this? What is there to dislike? It seems incredibly petty to me.
Thank you. I’m not sure. Based on a number of comments and talking with some other YT buddies a lot of people were very mean yesterday
@@HumbleMechanic H8ers gonna h8.
Do they fit on a Golf 7 shifter? is there any difference? i mean it looks similar but are they?(Golf 7 2.0 TDI). Cant find any bushing-set for a Golf 7.
do they do a kit for a vw mk2 golf 1.6
Hello, where can I find the bushing kit?
@HumbleMechanic would this kit work on a mk7 r?
Is there a link for the tyrol sport brass bushings?
Any ideas why my shifter feels loose going in-between neutral and drive ? It's almost like it skips over neutral and goes straight to drive if I don't push the shifter to the side a little, thanks for any help
Ahhhh Lovely but will have to search for an alternative here as the shipment is crazy expensive and no alternatives
Do you still have that notchiness in the shifter? That’s about the only thing I don’t like about the stock shifter in my jetta.
Yea it’s on the notchy side.
Does anyone know if these bushings are compatible with the older mk4 style(99.5) shifter? I was on there website but only saw this kit you used here???
Ok where I your shop located? I need a new vw tech to take my GTI too
Hi, I have Audi A3 8l , 1.6 benzine 2002 model and when I drive half an hour and warm up manual shifter get hard and sometimes doesn’t engage, 1st gear and reverse? Your suggestion really helpful for me.
Make sure the fluid is right
Hi HumbleMechanic ,
The fluid is okay.
Hey Charles, quick question for you. Why did you post a link to the bearing shell from FCP euro when it also is included in the Uro tuning link? Are they the same part? Getting ready to do this rebuild on my R32 as well. Cheers
In case you didn't need the whole kit. It should be the same part.
Do you know if the diesel geek kit will fit a 2005 VW PASSAT 2.0 TDI?
I think it's a different setup. You might have better luck looking for an Audi shift kit from like an A4/S4
@@HumbleMechanic thank you.
Wow, this is the first time a RUclipsr answered my question.
do you have the first gear getter dimensions?
My mk4 doesn't go into 5th..I adjusted the linkages..still no 5th..when I shift in 5th its 3rd gear again..I have a wobbly shifter..do you this this can be the problem?
Hello I having problem shift on first and reverse, I have 2014 Jetta tdi cjaa engine, with 6 speed manual, is this kit work on my car?
PArts of yours are different. Be sure to get the right car loaded on diesel geek
I'm about to buy my bosses 2004 jetta 1.8 turbo any suggestions??
I recently installed a forge short shift kit. And since I cant seem to shift into 2nd or 3rd without grinding. This is after a stage 2 clutch kit install as well. Bled the clutch. Adjusted the linkage many times. Referring back to the diesel geek video. And still no solution. Would the bushings make a difference in this? That's my next hope at least. If I double clutch I can usually get into 2nd and 3rd without grinding but even then sometimes it's not perfect. I do feel alot of play in side to side motion while the shifter is in any gear. 2013 gti.
Should I put white lithium grease around the ball?
I use Super Lube. It has a wider temperature range and does not break down the plastic
Will this work on Mk5eddy30
Just got the last bushings out of the car, the ones at the transmission mount. Fuck those are such a PAIN. Now two orange bushings left and all can go back in the car tomorrow. :D
I want to cry, fuck doing those orange bushings with a vise, should've bought some vicegrips damnit. :"(
Swordie100 how did you do?
Love the video, been watching alot lately and learning!
I have a 1999 mk4 GTI but I cant seem to find any brackets or bushings that will fit, because apparently the split is in the year 2000. any ideas? :D
I have a 99 mk4 with the mk3 style shift system it sucks horribly shifting especially to first and second
I just swapped out mine for the o2j! Much better
My mk5 can't move pass 2nd gear. Any suggestions
Probably just going to drill but does anyone have a brand for the 90 pliers that works with the no-drill method?
GT's Garage and Tech used Harbor Freight 90s and 45s and had no luck and ended up drilling so it seems the pliers do matter (or he just wasn't patient enough).
Does anyone know why my shifter doesn't return to center when in neutral?
New camera?
Video quality seems much better.
Thanks! Same camera, different format on the output side of the editor. I am always testing something
Curious, how many miles on the clock when you did this to your R32? TIA
140k or so
Need to do this for the W8 Passat. Any recommendations?
Actually not really. I’m sure there are some Audi parts that would be a better upgrade.
Does this kit fit in a mk5 gti?
Hey I was wondering if you could maybe point out some good site to get parts for mk2's because I see u do videos on vw' s but only on the newer ones
What type f things are you Looking for?
dylan ashmore germanautoparts.com
I see that your first gear getter cracked as well, Did it crack when you put it in reverse for the first time after the install?
Nah, just that little bit. No issues after instal.
@@HumbleMechanic Yup, I figured. Mine cracked the same way and hasn't had a problem. Just wondered if anyone else experienced this!
my mk iv vr6 has trouble going into 1st gear sometimes but if i drop it in 2nd and put it back into 1st its smooth as butter, could this be a synchro issue or can replacing the bushings solve it? Love these R32 vids btw!
try and get it adjusted first.
Was excited to do this on my mk4 and then one of the t20s on the bracket for the shifter just would not move 😂
how did you put on the circlip on ?
a little grease, and a flat screwdriver to lock it on. it's not easy to get it on with the box in the car. But its better than taking the box out
Hi Charles. Did you get the snap ring on from the side opening or did you use a 90 degree from the top? Also how did you use the grease?
the bottom of the shifter box is a panel that pops off btw....
Yep. And it lives on top of an exhaust, prop shaft, and 2 heatshields. This was was better. Lol
how fast do you run the 1/4 mile with the new shifter?
Too fast. Too furious. 😂 no plans on 1/4m runs for this car.
How the hell did you do it without cutting the side, or dropping the bottom?
It wasn’t super easy, just some carful maneuvering.
Well my golf has different shifter mechanism how do i fix mine
Tough to say with limited info. I do know DieselGeek has some videos of the other setups.
@@HumbleMechanic thank you for reaply well mine doesnt have shifter locker thing there the part number 1J0711025G
That’s an odd gear selector I don’t think I’ve seen it before
Why do they make the mk3 so difficult to replace the most important bushings
Do you have something like this for the MK3???
Not yet. But soon.
@@HumbleMechanic thanks!!