How to Apply Tile Adhesive and Set Tiles Properly [Make Your Tiles More Durable]
HTML-код
- Опубликовано: 26 май 2021
- How to install tiles the right way?
In this video, you will learn the NTCA-approved troweling techniques to apply tile adhesive and set tiles. This technique creates a stronger bond between the tile and the substrate. Prevent crack transmission, lippage, tile breakage, bulging or tenting, and other costly tile installation repairs.
Tiles are very durable materials that can last a lifetime - when the right tile adhesive and methodology was used. When tiles break, it is usually due to low-quality tile adhesive and faulty installation method.
The way you trowel mortar for setting tile makes a big difference. Tiles can withstand extra heavy service conditions. It takes a lot of impact or load to cause bond loss when installed correctly over a sound substrate.
On the other hand, unsupported spaces under the tiles create weak spots. Tiles with voids or air pockets underneath are easily damaged by heavy impacts, heavy loads, and other causes.
Spot bonding with mortar is also not recommended. It may be easier to set tiles this way, but it’s only a matter of time before the slightest force causes failure.
Today, many people are still using the wrong method in tile adhesive application and setting of tiles. They may get the job done more quickly, but they can’t get the proper mortar coverage and air gets trapped underneath the tiles, which ultimately leads to tile debonding.
Swirling the mortar causes voids where the tile is not bonded to the substrate. These voids can result in cracked tile and bond failure under normal use but especially under point load or impact.
Aside from impact and heavy loads, tiles with voids and poor mortar coverage are more likely to debond over a short period of time. According to the American National Standards Institute and the TCNA Handbook, a minimum of 80% mortar coverage is required for interior applications, and 95% for exteriors and wet environments.
The straight troweling method is the ANSI recommended technique in applying tile adhesive. In the latest episode of Magtanong Para Sigurado vlog, you will learn why it's the right way of applying tile adhesive.
If you have more questions, please leave a comment or message us through official Facebook page ( BuildritePhils)
You may also visit our website to learn more about our products and services (www.magnaprime.com.ph/)
Correction: 3:33 Notched Trowel Size recommendations have been updated. For 60x60 Tiles (12mm notched trowel). For 30x30 Tiles (6mm notched trowel).
#MagtanongParaSigurado #TileAdhesive #Tilesetting #TilesettersPhilippines #Tileinstallation #Tileadhesiveproduct #Tiles #Tilingsolutions #TilesPhilippines #Ceramictiles #Granitetiles #Tilingproject #Largetiles 
Хобби
UPDATE: 3:33 Notched Trowel Size recommendations have been updated. For 60x60 Tiles (12mm notched trowel). For 30x30 Tiles (6mm notched trowel).
Need pa po ba ng bonding agents or redflix bago gamitin to?
Hi, thank you for your inquiry. For bare concrete applications, you just have to add water for Smartbond Flex. For tile over tile applications, we recommend to add cement grip. You can see this post for your reference: facebook.com/BuildritePhils/photos/a.256515081150962/2275577692578014/
How about 40x40 tiles?
How bout naman pag 40×40 yung tiles sir. Ilan ho ang thickness dapat?
For tile over tile installation - Aside from the thin mortar, do we need to do back buttering for 60x60 tiles? Yung thin mortar, using the notched trowel 12 mm spaces, back buttering flat lang?
This is ABSOLUTELY legit information! Thank you very much! You are a big help specially sa mga first timer na kagaya ko! Mabuhay!
Thank you. Your comment is highly appreciated.
Maraming Salamat sir. SA napaka-informative video method para SA tamang pag lagay Ng tiles.
We appreciate your comment. Thank you for supporting Buildrite!
thank you for the info
Youre welcome po sir.
Thank you for this. I will install tiles in our home soon. And I'll keep on watching your videos (i have subscribed too)
We appreciate your comment. Thank you for supporting Buildrite!
Very informative video
Hi, thank you so much for your support and your great feedback. Your kind words are greatly appreciated, and we hope you won't hesitate to let us know if we can serve you in the future.
Napaka informative talaga sir
Hi Sir Jan ,thank you
Base sa matalagal konang experience sa paggamit ng tile adhesive, ito ay isang malaking TAMA.
We appreciate your comment. Thank you for supporting Buildrite!
Nice 👍
We appreciate your comment! Thank you for supporting Buildrite!
Salamat sir sa kaalaman
You're welcome.
💯thank you very much!
You're welcome!
Nice
Thank you for sharing your review with us. We are grateful for your kind words.
Yan din gamit namin ditu sa japan
thanks for sharing. may video b kyo patungkol paginstall ng tile using dry pack?
Hi, thank you for your inquiry. We do not recommend using a dry-pack method on tile installation.
Do you conduct classes like tile setting, plastering, or how to apply floor epoxy for DIYers?
Thank you :)
Hi! You can message us through our official Facebook page facebook.com/BuildritePhils for us to assist you further regarding your query. Thank you
sir gud day,sana po my vlog kau sa tile over tile at anong dapat gawen at gagamitin
We're currently making a video for this..Stay tuned in our page for the latest updates.
Mostly i heard that ABC tile adhesive is commonly used can you recommend also sir that brand thanks
Good day! We do not have any idea which standard they used on their tile adhesive. We suggest to seek advice on its rightful manufacturer/distributor.
Hi
Are you speaking one or two languages in this video?
I hear English mixed with something I don't understand.
Btw, great tips
Hi! You can message us through our official Facebook page facebook.com/BuildritePhils for us to assist you further regarding your query. Thank you
salamat sir.. very informative. one question.. ano po pinaka recommended niyong tile spacing.
Hi. Thank you for your inquiry. The ideal tile spacing is 3mm to 5mm.
👍👍
Sir vlog po kau ng 2 kind of mixing smartbond
Hi, thank you for your suggestion! We will surely consider this.
Ano dapat thickness ng adhesive sa concrete and sa tile? Ano dapat total thickness ng adhesive/mortar for interior tiles?
Thank you for the informative vid
Hi, thank you for your inquiry. The thin-bed method in tiling installation can be achieved using the right size of notched trowel. You acn see this post for your reference: facebook.com/BuildritePhils/photos/a.256515081150962/2245973822205068/
Boss pde po bang gamitin yang pang plastering sa crack cement na slab
Hi, thank you for your inquiry. Hindi po, sir. pa-send po ng actual photo ng area sa official facebook page namin na facebook.com/BuildritePhils
Hello, first time to see your video. Ganyan din po ba process pag marble ang flooring? Available na ba ang ganyang process nung 1996. Our house was constructed 1996 pa then years pass may mga nag crack na.
Salamat innadvanced for your reply Sir!
Hi, thanks for sharing. For marble-type tiles, we recommend SmartBond Flex Gold for 60x60 cm and below, SmartBond Flex Diamond for 60x60 cm and large format tiles. Tile problems such as hollow sounds, popping, and cracks can be avoided by choosing the right tile adhesive and a proper tile application method. To help you more with your problem, please let us know your details through our Facebook messenger for us to set up an on-site visit in your area. We are more than glad to help you assess the actual condition of your tile problems so we can accurately recommend products and procedures for you.
facebook.com/BuildritePhils
Can directly tiles in cement flooring with only adhesive?
Hi, thank you for your inquiry. Yes, pwede po. as long as walang existing sealer yung floor nyo.
Hi. Thank you for your inquiry. Yes sir. Make sure lang malinis yung area.
Area coverage/bag? Tnx!
Hi, thank you for your inquiry. Smartbond flex tile adhesive can approximately covers 5m² at 3mm thickness.
Hi. What can you say about the dry pack method of installing tiles? Ito kasi ang majority na method na ginagawa hanggang ngayon. Ano po ang advantage at mga disadvantages nito? TIA sa sagot.
Hi, Thank you for your inquiry. In this video you will know the full details regarding your question, kindly watch this video for your reference: ruclips.net/video/Gg_ciZ1F_G4/видео.html
Hi. Pag 60x60cm homogeneous tiles po, same lang po ba ng pag install gaya sa porcelain tiles? Thanks
Hi. Thank you for your inquiry. Yes, same as you seen on this video.
Any recommendation for an indoor porcelain tile adhesive to be used on concrete slab with that has a tendency to bounce?
Hi, thank you for your inquiry. What do you mean to "has a tendency to bounce"? Anong size din po ng tiles. Please message us on Facebook so we can discuss your inquiry: facebook.com/BuildritePhils
@BUILDRITECONSTRUCTIONCHEMICALS the location has a post tension slab, if for example you jumb on it the whole slab vibrates and shake!
You can use Smartbond Flex Diamond C2TS2. It has an improved adhesion and flexibility.
You can use Smartbond Flex Diamond C2TS2. It has an improved adhesion and flexibility.
sir, may video po ba kayo ng agkabit ng tiles sa makinis na sahig? sabi daw kase ng naggagawa samen di na daw pwede lagyan ng tiles ang makinis na sahig.
Hi. Thank you for your inquiry. We do not have video for that yet. However, you can still install tiles on a smooth finish flooring using the same method on this video. We recommend Buildrite's Smartbond C2S1 as your tile adhesive. You can watch this video for your reference: ruclips.net/video/Gg_ciZ1F_G4/видео.html
Sir thank you sa reply mo tanong uli sir ang adhesive ba hahaluan parin ng buhangin
Hi, thank you for your inquiry. Katulad ng sagot sa una ninyong katanungan, Hindi, dahil makakabawas sa performance ng adhesion promoters nito per volume of mortar na nilalagay sa tiles. Just add water lang po.
Sa dry pack method po sir, need pa po ba gamitan ng trowel ang adhessive tulad po dyan sa demo nio? Thanks.
Hi. Thank you for your inquiry. Thick bed method is a traditional way of installing tiles, which is already outdated. It's the process of applying drypack or tile adhesive with a thickness of 15mm to 25mm to install the tiles.
This method has many disadvantages:
- It is time-consuming because of the preparation
- It cannot meet the required mortar coverage under the tiles
- It is costly because it requires more material consumption
- It requires very skilled workers to avoid installation failure
We recommend applying a topping first using Cement grip and Hardcrete 310 prior to installing tiles to correct the floor level, then use the same technique as seen on this video. Here is the link for Cement grip and Hardcrete 310: ruclips.net/video/2NdXHfTcNPc/видео.html
Hi, do you recommended using tile levelers with this method po?
Yes you can use tile leveler to make your tile leveled.
is 80% coverage of mortar same as wall tiles for interiors, samples on the video area on floor?
Hi, Thank you for your inquiry! Yes, as long as same thickness.
Good morning Sir. Pwd po ba mag lagay ng floor tiles ng Cement lang ? Walang adhesive cement
Hi, we recommend using Buildrite Smartbond in tile installation. You can watch this video for your reference: ruclips.net/video/hObBAM5KfHk/видео.html
good day sir, ask ko lang po na need po ba na sinsilin ang makinis na floor bago itiles? pwede po ba haluan ng fined sand ang adhesive kahit na ang taas ay 3.5 cm. po ang lalagyan? salamat po sa inyong video it helps a lot.
Hi. Thank you for your inquiry. There is no need to chip the surface prior to the installation of tiles. You can use Buildrite's Cement grip as tile adhesive enhancer. You can see this post for your reference: facebook.com/BuildritePhils/photos/a.256515081150962/2366935676775548/
We also do not advice mixing sand and cement on tile adhesive because it will affect the quality of the adhesive. You can use Buildrite's Cement grip and Hardcrete 310 as concrete topping then use the thin bed method on installling your tiles. You can watch this video for your reference: ruclips.net/video/2NdXHfTcNPc/видео.html
Sir napansin ko na hindi dumidikit ang ashesive sa synthetic granite tiles pero sa ceramics dumidikit ng ayus may ibang product adhesive ba for synthetiic and porcelain tiles.? Tanx
Hi. Thank you for your inquiry. For synthetic granite tiles, we recommend to use Buildrite Granite Polymer C2 for flooring and Buildrite Smartbond Lightweight tile adhesive C2S1 for walls.
For Porcelain tiles, you can use Buildrite Smartbond Lightweight tile adhesive C2 for flooring and Buildrite Smartbond Lightweight tile adhesive C2S1 for walls.
You can watch this video for your reference on how to choose the correct tile adhesive: ruclips.net/video/E4X2a5-uInU/видео.html
Hello poh sir ,Oki lang poh bah patungan ng granite tiles ang lumang pangkaraniwang tiles ja naka install dati pa?thanks poh
Hi. Thank you for your inquiry. Yes, you can install new tiles on existing tiles. You just have to use Buildrite's Cement grip as your tile adhesive enhancer. You can see this post for your reference: facebook.com/BuildritePhils/photos/a.256515081150962/2275577692578014/
nice sir. ask lang po? pwede ba na tile adjesive lang ang gamitin? para sa tiles at sa flor? 1,5mm lang kasi ang allowance ng door namin sa flor. salamat po. from dumaguete po.
Hi. Thank you for your inquiry. Yes, tile adhesive is applied directly on your substrate when installing tiles.
good day! question po. 4 po nag popup na tiles namin sa first floor. since buo p naman po, pede po bang idikit n lang ulit ung dating tiles (60x60)?
Hi.Thank you for your inquiry.Kapag ganyan po sir kapak na po yan.Remove and replace na po ng tiles.
Hello po. Pano po direction ng troweling pag 40x40 or square tiles po?
Hi Maam /Sir regarding your query, straight application po
Pwde ko ba direct gamitin tile adhesive sa newly painted roofdeck/floor cementious waterproof painted, applying tile adhesive on floor then back of the tiles ano po ba needed maliban sa tile adhesive....
Mas like ko gawin tile adhesive compared sa dry pack na old tradition
Any advice for cementious painted floor paano mag tile setting
Hi, thank you for your inquiry. Please message us on our Facebook page so we can discuss your inquiry: facebook.com/BuildritePhils
Hi Sir Derrick, paano ung 95percent mortar coverage?
Thank you very much.
Hi, thank you for your inquiry. Sundin nyo po yung process sa video using notched trowel pang apply ng tile adhesive using thin bed method.
Hi po. If gagamit po ng sand and cement mixture sa tiles ng hagdan po ano po ba ang correct mixture?
If you're still using the dry pack method, we recommend at least using a high-strength tile adhesive additive/adhesion promoter to improve the adhesion strength of your mortar mix.
Here's how you can do it:
1. Mix 1 bag Portland cement and 90kg of sieved sand.
2. Add 250 grams of Buildrite TILE GRIP to the mixture before adding water. Mix it with a mechanical until a homogenous and lump-free paste is obtained.
3. Allow the mixture to sit for 5 minutes before stirring again. The mixture will yield 5.2 (25kg) bags of high-strength tile adhesive.
TILE GRIP is a powder tile adhesive additive specially formulated to be mixed with cement and sieved sand to produce a high-strength tile adhesive for ceramic tiles.
Click on the link below to see details.
web.facebook.com/BuildritePhils/photos/a.256515081150962/2417525031716612/?__cft__[0]=AZWZ2eCFmoELeHCErg92lM5f400O8rYAAtlHQZH0L-eTnI0Im9sKZnQir_0GJQ0JZ0gJNA_TFliDIDn36ZLUn6_PAGRZMLPrq32tCZQGFiR15NDSJ3ngeN3cRT3FpVgVpv0&__tn__=EH-R
Sir pede po ba na pang finishing din ang adhesive sa pader kase sayang po ung natira na adhesive,slmat po sa sasagot
Hi, thank you for your inquiry. No, tile adhesive requires a thinner application while plasters requires a minimum of 10mm thickness. We recommend Plasterlite for plastering. You can see this post for your reference: facebook.com/BuildritePhils/photos/pb.100076193444241.-2207520000./2537411649727949/?type=3
Good pm po sir..pwede po ba magtiles na purong adhessive lng na walang sand and cement na halo..thank u po
For using Smartbond Lightweight Tile Adhesive, we only recommend to mix it with water no need to add sand and cement.
good afternoon sir,kailangan oo ba ibabad sa tubig ang ceramic tile bago ikabit?slmt po.
Hi, thank you for your inquiry. Choose a tile adhesive that has excellent water-retention capability to hold its water content during the curing process. With this, you can eliminate the need to soak tiles in water, which saves time and prevents tile debonding. The pores on tiles can absorb the water from the tile adhesive, resulting in early dehydration and poor adhesion. You can see this post for your reference: facebook.com/BuildritePhils/photos/a.256515081150962/2249120405223743/
Matapos pong malagyan ng hinalong cement at sand ang flooring, Ang tile adhesive po ba ay iniaaply/ipinapahid ng puro sa tiles at yon ang lialagay sa mixed cement & sands sa flooring o imimix din sa cement, sands?? Tanx po
Hi.Thank you for your inquiry.Yes po sir mas maganda puro po yung tile adhesive na i apply sa tiles at flooring.You can watch this video for your reference.
ruclips.net/video/_WIFAsR04iM/видео.html
Sir pire tilde adhesive lang po ba gamitin wla na cement na ihahalo
Hi.Thank you for your inquiry. Yes sir pure adhesive po.Not advisable haluan ng cement.Just add 7 liters of water.
ok din ba gumamit ng electric tile vibration tool. Sa wall tile same technique din ba? legit din ba yung buildright product sa shopee
Hi, thank you for your inquiry. Yes, you can do the same technique using that method. Here is our official Shopee shop link: shopee.ph/buildrite_official
sir pwede po ba ang pure cement sa pag nag tiles sa walling,60 X 60 po ang tiles
Hi. Thank you for your inquiry. It's better to use pure Smartbond Lightweight Tile Adhesive in installing tiles because it has a high bonding strength than sand and cement mix for tile installation.
thank you po sa tips. ask ko lang po if I have an existing tiles same lang po ba ang technique if we choose na ipapatong nalang po yung bagong tiles or granite?? what type of adhesive ang ma-recommend nyo sa gamitin namin if papatong lang po sa existing tiles?? thanks po!!
Hi, thank you for your inquiry. Proper assessment and surface preparation are needed for this method. You can use Buildrite Cement grip as a tile adhesive enhancer for tile over tile applications. You can see this post for your reference: facebook.com/BuildritePhils/photos/a.256515081150962/2275577692578014/
@@BUILDRITECONSTRUCTIONCHEMICALS thank you po sa reply and for the instructions. more power to your brand po!!
Youre welcome po.
May ibat ibang klase kasi na tile's
good day po my tanong po ako pag adesive c1s1 po ggmitin sa tiles no need na po ba cemento . pwde na po ba i directa yung adesive sa tile at i install?
No need to mix with cement. Mix only with 6.5-7L of water per bag. Mixing with additional cement may affect the performance of Smartbond Lightweight Tile Adhesive.
Sir tanong ko LNG po kung ilang semento any mggamit s 30 PCs n 60x60 ntiles s dry pack method slam at po
Hi. Thank you for your inquiry. We do not recommend using dry pack when installing tiles.We recommend to apply a concrete topping first prior to the installation of tiles to avoid using the thick bed method For 60x60 porcelain tiles, we recommend Buildrite's Smartbond C2S1. You can watch this video for your reference: ruclips.net/video/mm5o-ZR1754/видео.html
Sir ask ko lng po kng San pwedengag inquir about sa tile adhesive at buy ndin ako
Good day! You can order online via our Magna Prime Shop (bit.ly/3D8vqLx) or our Lazada and Shopee shop or buy from our partner depots near you (bit.ly/3mo43WZ)
Hello Sir. Thank you sir. Very informative. Ask ko lang rin po.. Nagpapagawa kami ng bathroom using 60x120cm porcelain tiles (wall to wall), kaso sa application ng foreman namin, may halo po na tile adhesive and cement ang ginawa niya and wala po siyang gamit na trowel tool nor may ridges sa tile adhesive application niya, as in he lays the adhesive flat on the wall then tska po ilalagay ang malaking tiles. Acceptable application po ba iyon? Hindi po ba malalaglag ang tiles over the years? Thank you.
Hi. Thank you for your inquiry. In this case, 1) we do not recommend mixing tile adhesive and cement, 2) the right trowel should be used when installing tiles, 3) the right tile adhesive rating should be used.
@@BUILDRITECONSTRUCTIONCHEMICALS Thanks for the advise sir. I’ll rely this to our foreman. More power to your channel and business. Thank you.🤩
Thank you.
@@BUILDRITECONSTRUCTIONCHEMICALS Hi! May I know po kung bakit di pwede paghaluin ang tile adhesive and cement? Yun kasi ang ina-advise ng isang tile setter ko. Anong cons po nun? Thank you in advance.
Good day! Ang paghalo ng semento sa tile adhesive ay makakabawas sa performance ng adhesion promoters nito per volume of mortar na nilalagay sa tiles. Kapag nangyari ito, hihina ang kapit ng tile adhesive na magreresulta sa tile debonding o KAPAK.
Pwede po magpatong ng new tiles sa old existing tiles ano po pwede gamitin at procedure using buildrite product sa open deck terrace po lalagyan,salmt sa pagreply
Hi, thank you for your inquiry. Yes, it can be done. However, you have to consider checking if the existing tiles are still intact. You can use Smartbond flex tile adhesive depending on the types and size of your tiles and Buildrite Cement grip. You can see this post for your reference: facebook.com/photo/?fbid=413010887915356&set=a.184760590740388
Direct ko pong iaapply Ang cement grip sa old tiles Bago patungan ng buildrite tiles adhesive
Iyong side po wall n lalagyan ng tiles ano pwede ilagy n water proofing
In order to fully answer your question. Please message us on our Facebook page so we can discuss your inquiry: facebook.com/BuildritePhils
Sir pure tile adhesive lang po ba gagamitin pag istall ng tiles oh hahaluan pa ng cement
Hi.Thank you for your inquiry. Yes sir pure adhesive po.Not advisable haluan ng cement.Just add 7 liters of water.
Kailangan bang haluan ng portland cement ang adhesive
Hi, thank you for your inquiry. HINDI. Ang paghalo ng semento sa tile adhesive ay makakabawas sa performance ng adhesion promoters nito per volume of mortar na nilalagay sa tiles. Kapag nangyari ito, hihina ang kapit ng tile adhesive na magreresulta sa tile debonding o KAPAK.
Watch this video to learn more: ruclips.net/video/Gg_ciZ1F_G4/видео.html
Hello po, ok lang po ba ang tile adhesive na 2 inches thick ang pagkalatag para hindi na gagamit ng dry pack mortar?
To get the right elevation of your floor for tile installation you can use Hardcrete 310. Hardcrete 310 has a compressive strength of 3000psi @ 10mm Thickness.
Please click on the link below to see video. Thank you.
facebook.com/BuildritePhils/videos/104616120924
Ano po maganda gamitin ceramic tile na adhesive nagakaroon kc ng kapak ung mga tiles ko sa sala, tinanggal ko na, para di ko na tiktikin ung cemento o kaya grind kc maalikabok ung magandang pandikit na lng sana ung madalian lng.
Hi. Thank you for inquiry. Kapag ganyang case na po mas maganda po remove and replace na. Kasi unti unti narin po yan mag aangatan lalo pa't kapak na po.Thank you.
pwede po ba pure adhesive n lang ang gamitin,,hindi na gamitan ng buhangin at cement ang flooring
We recommend not to add sand and cement for Smartbond Tile Adhesive. It may affect the adhesion and flexibility of your tile adhesive and may result to delamination.
Thank you very informative, tanong lang po sana ako mas standard po ba gamitin ang pure adhesive kesa sa tinatawag nilang dry pack?thank you po yan kasi sabi ng sitter sa akin magpa tiles po kase ako
For tile installation it is recommended to use pure tile adhesive. Once you add any additional cement it may affect the adhesion of your tile adhesive.
Please click on the link below to see video.
studio.ruclips.net/user/videoGg_ciZ1F_G4/edit?c=UCOW4xyTyGGxrMfbPgrpzfhg
sir pano if 2 to 3 inches ung dapat kapal Ng lalagyan Ng tiles? at costly pra sa pure adhesive, ano ma rerecomentd nyo?
@@BUILDRITECONSTRUCTIONCHEMICALS sir pano if 2 to 3 inches ung lalagyan Ng tiles and costly naman pra sa pure adhesive. ano recommend nyo?
@@amboymanzano6964 buhosan niyo muna ng mortar tapos ibara niyo dapat leveled tapos hintayin niyo 1week or more then layout tiles using pure adhesive with correct size notch trowel.
Ask ko lang sir d na ba yan hahaluan pa ng cement yang adhsive? O purong adhsive kahit sa wall
Hi.Thank you for your inqury.Yes po sir clean water lang po ihahalo.
Sir almost 1 yr na yung flooring nagayun ko lagyan ng tiles. Kailangan ko paba mag lagay ng wiremesh para pampatibay or hindi na kailangan?
Hi, thank you for your inquiry. No need to use wiremesh for concrete flooring tile installation. We recommend using na correct tile adhesive depends on the size of your tiles and use the same method of application as seen on this video.
You can watch this video to now more on how to choose the correct tile adhesive: ruclips.net/video/hObBAM5KfHk/видео.html
Sir. Tanong kolang kung anong magandang gamitin na materyales sa pag repair ng floor tiles umaangat na po kc. Pero hindi pa naman totaly na nabakbak. Nag aangatn
Hi, thank you for your inquiry. You can use Handy fix. However, you have to remove the tiles then reapply using Handy fix. You can see this post for your reference: facebook.com/photo/?fbid=371708838712228&set=a.184760584073722
Anu size ng notched trowel sa 30/60 na tiles po..slamt
Hi. Thank you for your inquiry. 10 mm po sir.
ask ko lng poh pede poh bang haluan ng semento ang adhesive?
Hi.Thank you for your inquiry. No need to add cement. You just need to add water on tile adhesive.
Hello po. We have ceramic tiles na 30x 30 at 40x 40. Kindly advise what best smartbond or tile adhesive type to use please. Thank you po.
Hi.Thank you for your inquiry.For 30X30 tiles pwede po kayo gumamit ng Smartbond Flex Silver.
@@BUILDRITECONSTRUCTIONCHEMICALS Maraming salamat po!
You're welcome po.
Pede po ba ang pure adhesive
Kay sa mix ng dry pack?
It's better to use pure Smartbond Lightweight Tile Adhesive in installing tiles because it has a high bonding strength than sand and cement mix for tile installation.
Tanong ko lang sir, kapag ceramic tiles kailangan po bang ibabad sa tubig ng ilang hrs? Or pahiran nlng ng basahan bago ikabet?
No need to soak your tiles since it has a Good Water Retention properties. It gives you more time to set your tiles properly.
Sir ano po masasabi nyo about Sa dry packing method Ng tiles
Hi, thank you for your inquiry. We recommend to use screed to level your flooring first before using the thin bed method application of tile adhesive. We do not recommend using the dry pack method.
Ask ko lang can i use only tile adhesive sa pag lagay ng pieces ng broken terrracota sa cemented wall?of not what's the mixture? THANKS
For wall decorative stones you can use Smartbond C2S1. It is suitable for wall applications because it has an improved adhesion and flexibility.
Please click on the link below for details. Thank you.
studio.ruclips.net/user/videoGg_ciZ1F_G4/edit?c=UCOW4xyTyGGxrMfbPgrpzfhg
@@BUILDRITECONSTRUCTIONCHEMICALS nagpagawa ako ng mga plant boxes around sa fruit bearing trees sa back yard namin today.Planning to make use of our broken paso (clay pots )at yung mga retaso ng mga ceramic outdoor tiles sa terrace.Ipapalagay ko sana sa palibot ng plant boxes scattered hindi dikit dikit ang pagdikit ng mga ito.Can I use the Smartbond C2S1 na sinasabi mo.Do I have to use it purely or with cement mixture?(Refer to manufacturers guide?) Had watched the link you shared t but wants still to be sure.Many thanks .God bless.
Yes, for outdoor applications we recommend Smartbond C2S1. We do not recommend mixing it with cement.
@@BUILDRITECONSTRUCTIONCHEMICALS Sa Handyman /Ace Hardware lang ba nakakabili ng Smartbond C2S1?Tried sa nearby hardwares here in our place pero not available?Any idea how it looks like per gallon ba ito o powder in consistency?Is this expensive any idea of the price?Thank you again
Good day! You can order online via our Magna Prime Shop (bit.ly/3D8vqLx) or our Lazada and Shopee shop or buy from our partner depots near you (bit.ly/3mo43WZ)
Need ba basain ang porcelain tiles, salamat sa sasagot
Good day! Hindi na po kailangang basa-basain ang tiles, sir.
@@BUILDRITECONSTRUCTIONCHEMICALS hi thanks for the response sir, kht ceramic tiles? Ksi mas porous?
Traditionally, tiles are soaked in water to prevent it from absorbing water from the tile adhesive. The pores on tiles can absorb the water from the tile adhesive, resulting in early dehydration and poor adhesion.
Therefore, you have to choose a tile adhesive that has excellent water-retention capability to hold its water content during the curing process. With this, you can eliminate the need to soak tiles on water, which saves time and prevents tile debonding.
For this, we recommend SmartBond Tile Adhesive, a ready-to-use, cement-based tile adhesive created to properly bond most types of tiles for indoor and outdoor installation. It has excellent water retention to prevent the absorption of water into the dry tiles or substrate.
facebook.com/BuildritePhils/photos/a.256515081150962/2249120405223743/
pwede kya paghaluin ang purong cement at adhessive
Hi. Thank you for your inquiry. No sir because its better to use pure adhesive to use for good adhesion
Sir paano ho if ang flooring para latagan ng tiles ay smooth finished cya? Ay ano ang tamang method sa pag tiling?
Hi. Thank you for your inquiry.
7 TIPS ON HOW TO USE THE TILE ADHESIVE PROPERLY.
1. DO NOT USE EXCESSIVE AMOUNT OF WATER IN MIXING THE TILE ADHESIVE. Excessive amount of water when mixing the tile adhesive is one of the cause of tile debonding. The level of water added onto tile adhesive will significantly affect its adhesion strength. Tile installer must be carefully read the mixing ratio and methodology to prevent tile debonding.
2. CLEAN THE SURFACE BEFORE INSTALLATION OF TILES TO PREVENT TILE DEBONDING. Unprepared and improper cleaning of the surface before tile installation will not let the tile adhesive bond to the substrate, and it will cause tile debonding in the future. Surface must be clean from any dirt and dust before the installation of tiles to prevent tile debonding.
3. USE SUITABLE EQUIPMENT AND MATERIALS IN APPLYING TILE ADHESIVE TO ACHIEVE BEST RESULTS. Unskilled tile setter, unsuitable equipment and materials, and lack of project management are just a few things that can lead to poor workmanship. Quality work begins with the conscious efforts of tile setter to execute the specifications of the contract, he is responsible for meeting standards of quality, care, and expertise.
4. NO NEED TO SOAK TILES ON WATER. Tiles have pores will absorb the water out of the mortar without allowing it to set properly, leaving weak bonds between mortar and tile. But using a tile adhesive that conforms to European standard like Buildrite Smartbond tile adhesive, there is no need to soak the tiles on water because of its water retention capability, it also prevents hollowing, shedding, or even cracks on your tile adhesive.
5. USE THE RIGHT SIZE OF NOTCHED TROWEL. No matter how much mortar piled onto the trowel, the notches apply it in nice, even lines of identical thickness. It creates spaces between the lines of mortar. These allow air to escape when the tile is pressed into the mortar. Without the spaces, you could get air pockets that prevent the tile from lying flat or adhering properly and will lead to tile debonding.
Three commonly used trowel sizes are:
3mm x 3mm Square notch trowel for 30cm x 30cm and below size of tiles.
6mm x 6mm Square notch trowel for 60cm x 60cm and below size of tiles.
10mm x 10mm Square notch trowel for 60cm x 60cm and above size of tiles.
For large format tiles, back buttering is recommended to apply enough supporting adhesive under them.
6. DON'T RUSH THE CURING TIME. Even though all the tiles are down on the floor and set, don't start putting the grout down. Allow the thin-set the proper amount of time to dry, otherwise you will damage the tiling job.Once tiling is complete, do not disturb for at least 4 hours. Wait 24 hours after grouting before opening the area to dry service and 7 days for wet service.
7. KNOW THE RIGHT TILE ADHESIVE TO USE. On the Philippine market today, there is no standard on what tile adhesive to use on a specific tile application resulting to tiling failure.According to the European standard BS EN 12004; C1 and C2 ratings are the requirements for cementitious tile adhesive while S1 and S2 ratings are the requirements for deformable tile adhesive. This classification will determine the correct and suitable tile adhesive for each type of tiles and application. The size and type of tiles will decide what level of C rated tile adhesive to use while the floor elevation, indoor and outdoor area of application and floor and wall application decides the level of S rated tile adhesive to use on the tiling.
Sir ano po bang adhesive pwd sa tyles at plywood.
Hi .Thank you for your inquiry .We recommend handy fix to tiles and plywood . Apply to one surface and press together the substrates. Hold until it sets before releasing.
Sir pwede bang tile adhesive lng wala ng dry pack ? Naka rough po yung flooring.
No need for dry pack if you already have a leveled floor. To get the right elevation of your floor you can use Hardcrete 310.
Please click on the link below on how to apply Hardcrete 310.
ruclips.net/video/-6g5TNpcxUs/видео.html
👏🏾👏🏾👏🏾💯💯💯👆🏽👆🏽👆🏽
paano po kapag mag iinstall ng tiles sa roofdeck after ko i waterproof ng flexicrete ohk lang ba na tile adhesive lang ang toppings kahit need pa ng slope to drain? oh need parin ang drypack para sa thickness ng toppings?
Hi. Thank you for your inquiry. We do not recommend using drypack on installing tiles. We recommend to use Buildrite's Cement grip and Hardcrete 310 to achieve a slope to drain flooring prior to the installation of tiles. You can watch this video for your reference: ruclips.net/video/2NdXHfTcNPc/видео.html
Hello po. Sabi ng workers ko, magastos daw ang pag gamit ng smartbond. They started suggesting things that are not part of your recommendations.
Kindly direct me to the thin bed method of tile adhesive application. Thank you po.
Hi, thank you for your inquiry. We need more information about this, please message us directly through our official facebook page: facebook.com/BuildritePhils
Hi. Paano ba tamang pag keep ng used tile adhesive? Madalas kask nasasayang lang, namumuo gaya ng sa semento.
Hi.Thank you for your inquiry.I sealed lang po mabuti sir.
panu naman po sa repairing ng mga umangat/na basag na tiles?my video den po ba?pwede bang adhesive na lang?
Hi. Thank you for your inquiry. For repairing debonded tiles, you can use Max Bond All Purpose Epoxy or Non-Sag Epoxy. You can see this post for your reference: facebook.com/maxbondadhesivesolutions/posts/2894288690606721
@@BUILDRITECONSTRUCTIONCHEMICALS morethan 10 tiles po yung umangat eh..okay lang po ba yan?
Good pm po San po kyo may branch dto sa cabanatuan
Good day! You can order online via our Magna Prime Shop (bit.ly/3D8vqLx) or our Lazada and Shopee shop or buy from our partner depots near you (bit.ly/3mo43WZ)
Hello po, ask ko lng po sa pagtitiles po ba isisisi pag may tumatgas na tubig, lalo na pag sinilsil?
Hi Maam /Sir Marami po possible reason,Possible na damage yung waterproofing habang nagtatiles
Sir panu yun, eh isang buwan na tpos ang pagtitiles ska sinisil, tas binaklas tas sinabing d natuyo yung simento,
Asking paano at ano ang gagamitin pag mag repair na ng tiles na hindi na kumapit at paano ang paraan
for delaminated tiles you need to remove and replace and use the proper tile adhesive. Selection of tile adhesive depends on the type of your tiles and the area of application.
Click on the link below to see details. Thank you.
studio.ruclips.net/user/videoGg_ciZ1F_G4/comments?c=UCOW4xyTyGGxrMfbPgrpzfhg
sir,im beginer for installing tiles,alin po ba ang dapat unahin na na lagyan ng tiles Walling or flooring sa ,CR po at Banyo thanks po
Hi sir, much better po if mauna ang wall tiles bago po ang floor tiles, sa ganoong paraan naiiwasan po ang pagtapon ng mga tira tirang adhesive sa floor tiles
thank you po
You're welcome.
Sir tanong ko lang po kc dalawang ulit na po natuklap o natanggal yong tiles na Granite na ginamit namin ang sukat po ay ( 60 cm X 60 cm ) samantala yun tiles na Local product gaya ng (MARIWASA)ay hindi naman natuklap o natanggal ano po ba ang tama na ADHESIVE na dapat gamitn?, maraming salamat.
Hi, thank you for your inquiry. For Porcelain, Granite, Natural Stone, and Marble with 60x60cm and below tiles size, we recommend using Smartbond Flex Gold. You can watch this video for your reference: ruclips.net/video/hObBAM5KfHk/видео.html
Review den Redifix ano yan?
Good day! Unfortunately, we do not have idea on other brands. We suggest to seek advice to the rightfull manufacturer/distributor.
Pwede Po bang haluan ng buhangin Ang adhesive Sir?
We do not recommend to add cement the tile adhesive. It may affect the adhesion of your tile adhesive.
Kailan po ginagamit ang back buttering?
Hi. Thank you for your inquiry. Back buttering usually used on bigger size of tiles to achieve good mortar coverage and good adhesion specially if there is warpage present.
Sir tanong ko kng po..totoo po ba na natutuklap ang mga 60x60 na tiles after ilang years of installation..?
Hi. Thank you for your inquiry. May tendency na matuklap ang tiles dahil sa ibat ibang factors katulad nang movement nang flooring na minsan hindi kaya nang tile adhesive, kaya nirerecommend namin sa buildrite na gumamit nang smartbond.
Ano Po ba dapat quality ng tile's sa floor,
There are tiles that are intended for floor application and wall application. Most of floor tiles is thicker than the usual and has a darker bottom part. Use the appropriate tiles depending on the manufacturers specification and chose the right tile adhesive depending on the area of application and the type of tiles.
Please click on the link below to know more. Thank you.
studio.ruclips.net/user/videoGg_ciZ1F_G4/edit?c=UCOW4xyTyGGxrMfbPgrpzfhg
Ano ang name nang powder ang adhesive gamitin para sa tile?
Hi. Thank you for your inquiry. We recommend Buildrite's Smartbond lightweight tile adhesive. You can watch this video for your reference: ruclips.net/video/Gg_ciZ1F_G4/видео.html
Boss ano ang Mas matibay Para sa 60x60 porcelain tiles, gumamit NG dry pack or pure mixture? Kung mixture naman saan mas matibay adhesive or cement?
Hi. Thank you for your inquiry. We do not receommend using dry pack when installing tiles. For 60x60 porcelain tiles, we recommend Buildrite's Smartbond C2S1. You can watch this video for your reference: ruclips.net/video/mm5o-ZR1754/видео.html
@@BUILDRITECONSTRUCTIONCHEMICALS boss walang available sa amin smart bond C2S1, at paano Malaman kung ang isang adsehive ay C2S1? Itong mariwasa at holcim premium adhesive pwede ba ito gamit in porcelain 60x60?
Sorry, but we do not have an idea on other brands. Kindly seek advice to its rightful manufacturer or distributor. Thank you.
@@BUILDRITECONSTRUCTIONCHEMICALS Salamat boss.
Ayus lang po ba na purong adhesive ang gagamitin kahit wala ng dry pack.
Yes, we recommend applying only tile adhesive using the thin bed method as seen on this video.
Back to back ba mag lagay ng adhesive sir?
Hi. Thank you for your inquiry.Yes pwede rin po sir para po mas makapit,Please message us on our Facebook page: facebook.com/BuildritePhils
tanong po, 60×60 porcelain tiles anong dahilan bakit uma angat. sakamat po
Hi, thank you for your inquiry. Marami pong factors kung bakit umaangat ang tiles. Katulad nang pag gamit ng maling tile adhesive, maling paraan ng pag iinstall, maling surface preparation, hindi paglalagay ng spacing or grouting, atbp.
Ilan adhesive Po Ang nagagamit sper sqm?
Hi, thank you for your inquiry. Buildrite Smartbond flex can cover 5m² at 3mm thickness per bag.
Ani po ba Ang ihahalo sa adhesive, tiles
Hi.Thank you for your inquiry.Water lang po sir ihahalo.