Which Velux shutter is this, please? As far as I have heard, you can press „reset“ on your remote control instead of pressing the button in the shutter box. The shutter goes up and down for some times as well, and you can continue as shown here. But you won’t have to climb onto your roof. 😉
This worked for me aswell. In my case it was the "gear" button. Needed a hair pin to press it. Pairing the devices this way has the advantage that you can also use the remote in addition to the Tahoma App.
I don’t think this wil work with a Tahoma because a Velux is not in the list with supported devices: service.somfy.com/downloads/be_v5/tahoma-homekitcompatibilitylist_eng.pdf
Ik heb het uitgevogeld zonder dus aan de rolluik buiten zelf aan te komen. Met een afstandsbediening duw je met een fijn pinnetje aan het TANDWIELTJE, dan zendt ie 10 min het signaal uit. Kort na het indrukken van het tandwieltje, zoek je op uw Tahoma Box naar een IO signaal zonder afstandsbediening. En voila deze staat gekoppeld! Succes iedereen
Works as described! Thank you very much for sharing this video, 10 mins and the shutter was added to Tahoma and it works!
Thank you very much!!! You gave me the information Isurched so long, but wich I didn't found at the HP of somfy or velux that easy.
Great. So I have to climb on the roof for this stuff.
Who has invented this?
Which Velux shutter is this, please?
As far as I have heard, you can press „reset“ on your remote control instead of pressing the button in the shutter box. The shutter goes up and down for some times as well, and you can continue as shown here. But you won’t have to climb onto your roof. 😉
This worked for me aswell. In my case it was the "gear" button. Needed a hair pin to press it. Pairing the devices this way has the advantage that you can also use the remote in addition to the Tahoma App.
@JottyHB and @XHeadhunter66: Thanks! This is important information.
Thank you! It did work for me too. I have a question, how is it possible to add the shullter into the apple homekit?
I don’t think this wil work with a Tahoma because a Velux is not in the list with supported devices: service.somfy.com/downloads/be_v5/tahoma-homekitcompatibilitylist_eng.pdf
Geht die normale Fernbedienung auch noch ? Wurde zuerst die kleine Fernbedienung eingelernt und dann die Tahomalösung?
Ik heb het uitgevogeld zonder dus aan de rolluik buiten zelf aan te komen. Met een afstandsbediening duw je met een fijn pinnetje aan het TANDWIELTJE, dan zendt ie 10 min het signaal uit. Kort na het indrukken van het tandwieltje, zoek je op uw Tahoma Box naar een IO signaal zonder afstandsbediening. En voila deze staat gekoppeld! Succes iedereen
Beste Robin, welk tandwieltje bedoel je ?
@@geertdeley1867 Het tandwiel wat afgebeeld staat op de zijkant van uw Velux remote.
5 à 10 seconden op de reset toets drukken tot het rolluik op en neer gaat. Dan kan Tahoma hem vinden. Bedankt voor de tip 👍
@@nvanlaeken afstandsbediening kan nadien ook nog gebruikt worden of dan enkel maar via Tahoma te bedienen?
@@CreatorG met beide