THE BEST Silhouette Cut Settings | Quick Tip Tuesday
HTML-код
- Опубликовано: 25 авг 2024
- Settings I use for Vinyl, Oramask, and Contact Paper on the Silhouette Cameo 3
*****************************************
* F O L L O W * M E *
F A C E B O O K: / thedailydiyer
I N S T A G R A M: / thedailydiyer
B L O G: dailydiyer.blo...
E T S Y: www.etsy.com/s...
T W I T T E R: / thedailydiyer
*************************
Popular DIY's:
*Creating Contact Paper Stencils: • DIY Creating Contact P...
*Desk Build | IKEA Hack: • DIY Desk Build | IKEA...
*Upholstered Headboard: • DIY Upholstered Headboard
*Farmhouse Coffee Table: • DIY Farmhouse Style Co...
*************************
I N Q U I R I E S:
TheDailyDIYer@gmail.com
*************************
Disclaimer:
All of the footage, photos, and designs are my own and may only be used with my permission. I am not sponsored by any of the products or tools shown in these videos unless otherwise mentioned.
*****************************
Songs By: Nicolai Heidlas
I would love for you to do a series on Silhouette tutorials and quick tips! You are a great teacher and your instructions are clear and easy to follow. Thanks for sharing!
All I needed to hear was the autoblade gives you trouble and it fixed my problem. THANK YOU!!!
Cut settings are the code, the treasure! THANK YOU!
I watched this video yesterday and came back today to tell you, thank you so much for the tips!! OMG I’ve never had such perfect cuts before!!
OH I LOVE TO HEAR THAT!!!! YAYYYY!!!!
The Daily DIYer I totally vote for another tutorial!
Thank you for not talking a mile a minute I would love to learn more of the settings, on silhouette I just got mine so am struggling
THANK YOU!!! I couldn't find "cut settings" anywhere on a previous tutorial. I now found out, thanks to you, I was watching it on a Silhoutte (3) tutorial!! UGGGG!
yes, please post some Silhouette tutorials!!! trying to make word stencils and getting frustrated
Shannon:
I know this after the release by a long shot. However, you are so clear in your instructions. I am subscribed to your DIY CHANNEL AND HAVE BEEN FOR QUITE A WHILE. I RECENTLY PURCHASED A CAMEO 4 AND AM HAVING SOME TROUBLE using the auto blade. It was good to hear that you have had problems, too. I would love more videos on the Silhouette and will look through your video list!
I would love a Silhouette series!
YES PLEASE! I would Love a full series on Silhouette Studio! I’m am new to it all still and with so many tools and settings I am confused on the designing with the studio. I can do the basics (the very basics lol) but I would like to learn all about it.😊❤️
i guess it is kinda randomly asking but does anyone know a good site to stream new series online ?
@Maddox Russell I watch on Flixzone. Just google for it =)
@Colin Ellis Yup, have been using Flixzone for months myself :D
@Colin Ellis Thanks, I went there and it seems like they got a lot of movies there :D Appreciate it!!
@Maddox Russell Glad I could help :)
You are so stinkin AWESOME!! You sold me on the Silhouette!! THANK YOU!! Keep'em coming!! I'm taking notes!! lol
I'm a SIL fan through and through. Glad I could help!
Thank you for taking the time to make this info public.
You are a good teacher. You were very helpful in solving my vinyl problem.
This came at the perfect time. My hubs surprised me with a silhouette, Saturday. I still haven’t figured out how to load the blades. Let alone uses it, lol. Plez plez plez do a silhouette series! That would b amazing! 😃
I was in your boat about 6 yrs ago when I got my cameo. There was definately a learning curve. I was 75 then and finally learned how to use from watching what seemed like hundreds of RUclips videos. There is also Silhouette School which has many tuts. Took me several months to learn, but then again, I'm old woman$\
Happy Monday, thanks for sharing.
Thank you that was my first lesson!
Another AWESOME tip THANK YOU for SHARING LOVE LOVE LOVE your explanation of the different types of settings to use
dont mean to post on an old vid but your vid had great tips thanks, i will look into that ratchet style blade currently having lifting problems with auto blade with oramask 813
Would love a full series!
I would like for you to do a series of Silhouette videos. I recently used my Cameo 3 for the first time and would love to learn all I can about.
I love your videos! You inspired me to try the contact paper for stenciling. Thanks!
just got a cameo and would love a Silhouette series thanks
awesome tip, would love silhouette tutorials
on the auto blade i leave it at 1 for depth force at 8 works fine for me
Thank you for sharing this video. It's very helpful. However, I struggle with weeding. Kindly help with helpful tips that can guide me on this. Thank you.
Archive settings for cutting so I can pick the setting worked for selected material
Hi I like your tips
Can I know what are the sittings of balsa wood plz
Thank you
I'm new at making custom shirts. I have the cameo 4, inkjet printer, heat press ect. I'm all set to go, but I'm trying to figure out how to use the cameo to cut out the design from the heat transfer paper. But I'm stock....lol...any advice on how i do that?
This was very helpful thanks! I would love some silhouette tutorials!
What is the correct setting for glossy vinyl using the auto blade
you never changed the material you were cutting in the setting does that not make a difference it stayed on card stock
Good tips!
I'm a pastry chef and I just got my first Silhouette Cameo (3). I'd like to make some stencils that will be use primarily in chocolate work. I need to cut material that is 1 to 2 millimeter thick (.03 to .07 in). It needs to be plastic, silicone or rubber type material. Could you please recommend a material and cut settings that would fit this purpose? Thank you! I'm loving your videos!
What about heat transfer vinyl what setting is normally used
I've used V3 of Cameo for about 6 years and am familiar with it. Now my sight is extremely bad and have been afraid to get V4 because I might not be able to learn where the new setting are. I would like to see a tutorial on the new version. Maybe I can see if I can follow it well enough to change. You are the best. By the way, I'm 80 yrs old and should probably stop trying to use the cameo at all...but I just can't bring myself to give it up.
I need coaching on using my silhouette...Especially on making stencils bigger than the mat or wider than 12 inches. Also on how to make a phrase curve. I'm a dinosaur, and would appreciate any tips at all. 😇. Also tips on moving all the designs to cloud storage if that is possible. Thanks for all your help.
Have you used siser brick 600 if so what settings? I am very new and have the auto-blade which is never consistent, I'm thinking of buying the ratchet blade instead.
Thanks Shannon, love your channel!! I would love to have other Silhouette tips. Got mine recently & tho there are a lot of tutorials out there I love the way you break things down. :)
I'm new to all this is the auto blade a normal blade as long as I don't set it to auto or do I need to buy another blade. My 4 only came with an auto blade I believe.
I really don’t know what is wrong . I just purchased a racket blade and just installed it but I can’t see the racket blade on my silhouette setting tool to selected
Do you know good settings for self laminated vinyl, i laminated some vinyl but when i cut it. it wasn’t cut all the way threw☹️
I would love to see videos on the button settings on the side of the studio a I am new.
Great video! Can you show us how to cut with various papers such as cardstock, or printing paper? Thank you!
This is perfect! What do you recommend for glitter vinyl or cardstock?
Hi what settings u use for cardstock 110 lb thank u
I cannot figure out how to get the knife to cut the vinyl. The knife blade nowhere comes near to the vinyl - I have figured out other areas - thanks to the wonderful RUclips sessions. Any help or direction would be nice
Thank for this video .it very nice explain .I have problems in during the cutting design.I have cameo 4 buy recently.my machine not cutting on design edge line .it cutting out side of edge line.what can do about it can you tell me any suggestions.thank you.
its ok to rachet blade in
stock blade?
Can you possible link me how to cut shapes on material?
Hi what are your cut setting for Htv Vinyl and Glitter
What setting do you use for Neenah 80 lb cardstock and 100 lb.
But what settings do I use if using the auto blade?
I just found and LOVE your tutorials! I use a Cameo 3 for scrapbooking and wonder if I can use the Cameo 3 to label the front and spine of my Creative Memories scrapbooks. There must be a way, but I don't know where to start. Can you do a tutorial or give suggestions?
What is the settings for heat transfer vinyl ?
I have the Cameo 4 and just upgraded to the Business version and am having issues with the software locking up and the setting changing. What I used before with the basic cut HTV nicely now the setting and either not cutting the HTV or they are cutting through to the mat. The force defaults too 33 which seems a bit high for HTV
What do you cut your HTV on? I just received a machine and cannot get it to cut.
Would love to see more Cameo tip videos.
Have been following you for awhile and love all of your ideas.
do these settings apply for polyflex
Thank you for your help! What settings would you recommend for Gecko Flex Sport?
Lisa Renee I need this answer too
OKAY so I took your advice and went ahead to but the ratchet blade. I used it on the given settings. Lowered the speed, even the blade # and still not cutting through. Please help, I've already waste a whole 5ft roll.🤦🏻♂️ I need help idk what I'm doing wrong...
I just got my Silhouette Cameo 4 in 2 weeks ago
I have a cameo 2 and am trying to cut glitter removable vinyl and having a hard time. I’m very new to all of this. What settings do you suggest? Thanks so much. A series would be wonderful!
Yeah like many other people, I haven't used my either. This helped lot for a visual learning.
How did you get Spider-Man imagine, is it off from the internet? Would love to make for my son who's a Spider-Man freaks! Lol
Thanks so much for sharing with us all!
I have had good luck with these settings when using the mat but not when feeding the roll through for longer cuts. It either cuts through the backing or doesn't cut all of the way through the contract paper layer. Suggestions? Thanks for your help!
Thanks for your video it was very helpful but i do have a question. For some reason I can not get my cameo to cut my vinyl, Do you have any suggestions?
While cutting image, laser cutting away from the images , it's not cutting where I have selected the images
Hello hi
Having trouble with my cardstock
Yes.. plz..
What setting do you use for 831?
My machine was cutting right and right after i wanted to cut a new drawing it wasn,t cutting everything i don,t know whats wrong with the machine
Hi! Next to the bottom were it says ready now I have a comment that says layers and says cut lines , I don’t know where this came from!
Please do one on downloading you orders you buy for Still auto cameo machines pretty please.
I have the auto blade new cameo 4.. what blade and force would i use to cut glitter cardstocks
Hey Shannon I would love to see a series I am still a work in progress on the cameo. Lol
I do have a question do you use a mat? I have problems with the stencil material lighting off the backing whether I use a mat or not?
Thank you for the tip today I will trying this method next. ❤️❤️❤️
I rarely use a mat. Try these cut settings and no mat and see if that helps.
The Daily DIYer I will definitely try I have also been using the auto blade I do have a ratchet blade so I’ll try that one. Thank you
What is the difference between the auto blade and the ratchet blade?
I cannot find anything that explains the simple/line/fill functions. What or when do you use these? thanks!
Can you tell me the settings for shimmer vinyl? Silhouette Cameo
omg i finally found you lol i have the same software and im a first time user learning this machine n omg its was very confusing to me at first. do you have a tutorial on how to download a picture from google into your computer and to print? please say you do.
What are the settings for cardstock. I can’t seem to get a good cut. You mentioned changing your blade to a ratchet blade should I do that as well?
So I am using Cameo 4 with Autoblade and it refuses to penetrate permanent outdoor vinyl -- no matter what the settings are changed to. Is the "ratchet blade" another blade? Reason I ask is because (I'm still pretty ignorant) I do not see a "ratchet blade" for sale for Cameo 4.
I'm really not sure with the Cameo 4, I think mine is a 3. It may still work for it though? I always use depth at 3
Hi I'm having trouble cutting opal vinyl. Also can I use those setting to cut thick oracal vinyl?
With haven't been able to get faux leather to cut smoothly it always seems to tear
I’ve never tried the leather before
Can someone answer me what is the purpose of the numbers around the blade? Thanks.
what do you use for HTV. After wasting 4 rolls of HTV everyday iron on my machine is not cutting completely through. I have cut with a deeper blade setting even and it doesn't cut through. What in the world am i doing wrong? I have no problems with regular oracle vinyls.
I need help with (fashion) regular vinyl cut settings !!!
Please what is the best setting to cut photo paper glossy 255g/m?
Hello, I just got my Cameo 4 and really new at this cutting stuff lol. I curious if these setting are good still today. I am not sure I am doing it right, but I dont think my vinyl is cutting and weeding right. Using the auto blade and gonna attempt to change the depth to help things along. Thanks
Any luck sir? Still can't find the right settings to cut vinyl? Idk if it's the blade #, the force or speed but I tried it all and hasn't worked for me...🤦🏻♂️ and it's with the ratchet blade that she mentioned ...
@@chrisgonzalez4309 I am using the auto blade and I use 1 depth, 20 force and 7 speed. Unfortunately it seems different for each machine and material. I have only been cutting 651 vinyl.
@@RonWaller okay I figured it out man! It was the 631 that was the issue. So I used the 651 today for a lenghty message and worked for me perfect! Perfect cut and weed!
@@RonWaller that force is way to high to cut vinyl man in the first place! My settings that worked for me is; " Auto Blade "
#3 Blade | Force 10 | Speed 5
@@chrisgonzalez4309 Glad you got it working. Its a pain figuring out the perfect settings. I use my settings and they work so which what we look for.
how muich for a video call to help me i am super lost and keep having trouble
Hello! Tool 2 how do you activate it or switch to blade 2 i have tried several things and no matter what i do blade 1 starts cutting, is blade two just a holder for a blade ?
did you manage to figure this out as I am struggling with same
Can I ask something mam? I can't use my cameo at this time, I need to troubleshoot because I can't send the file. It appears Unavailable and when I connect the cord it's syncing and nothing appears. I try to used different way to troubleshoot. Can you please help me to fix it and to appear the READY in the screen or monitor? Thank you in advance
Hey, I need your help.
I cant find the right settings for my cameo 4. it keep cutting to deep
What settings would I need to have it on for stickers please
Can you help ...I been wasting vinyl like crazy.. I watch a lot of video for setting cut, but still no progress..for new user for siser HTV and glitter setting cut? I put it on auto blade as many refer too and blade 6 ,speed 10, force 16....or I try blade 6, auto blade,speed 10 force 16 ( no effort ) . I got so frustrated that I give up and run out of vinyl...and some of the setting cut will cut my cutting mat...or cut through the vinyl...lolll....please help..thank you
hi i dont know how passes and force works if you adjust it. anyone can explain pls. im cutting an HTV and oracal on my Cameo 3.
Where can I get the ratchet blade. I’m not finding it in michaels
Amazon 👌🏻
Do you ever cut fabric for applique?
Any ideas why when cutting htv it cuts all the way through the paper PLEASE HELP
Hi, I make planner stickers but my registration marks are off, it keep cutting into my design, what I’m I doing wrong. 🤦🏾♀️
Do you have to “add “ device to your PC ?
Hi sweetie. Please can you give more video on the silhouette cameo . im new to it and everything is coming out wrong im practice in the vinyl cricut i dont know if there a different. Please help. Thank you
Check Silhouette School Blog 👌🏻
I can't seem to find my right settings. If I go 10, my vinyl tears when it cuts. But if I go around 2 or 3, it doesn't cut all the way through. I'm adjusting a bit at a time trying to find what works but running thru material like crazy
Anytime I'm trying a new thing I cut a small star over and over. A star has enough direction changes to see corners and sides but doing it small you don't waste much of it goes wrong
I have my blade set on 10 but still doesn't cut through standard card stock! do I need a new blade?
I use blade 3, depth, 25 and speed 10 on a ratchet blade now for card stock. Worth a try. If not then yes, time for a new blade
@@TheDailyDIYer Thanks! I was looking all over the place for blade settings on a Cameo 3 for cardstock and I tried these and it worked perfectly!