Welding vs Soldering vs Brazing - Basic Brazing Tutorial
HTML-код
- Опубликовано: 20 сен 2024
- James Tear, CEO of Solpro, talks us through the differences between different types of metal joining and under what circumstances you would use each as well as covering a short tutorial on how to use brazing rods correctly.
For more information or to purchase brazing rods or flux powder, visit our website solprobrazing.co.uk
I the difference between bracing and soldering was a bit unclear.
So far i found a statement telling the the only difference is the temperature (soldering < (450 deg Celius < brazing)
Yes its very similiar. But soldering isn't allowed for gas pipes because if there is a fire the soldering would just melt. I soldered whenever possible because you don't need a big oxygen bottle but just a small red one (acytelyn?) and it was easier when soldering copper pipes. But some tubes need brazing. Also heating pipes here by law.
your comment was more helpful than the video
It was way too hard for me to find an explanation on the differences between copper/bronze based brazing and silver based brazing, and you answered it in less than 3 minutes. Way too many answers describe the difference between soldering and brazing, using conventional solder and silver brazing.
Thank you.
Great information, but scary bad soldering skills.
This was a great video, thanks a lot.
The main difference between welding and brazing(soldering) is melting. In brazing(soldering), metal producers heat up the metal to be bonded but never soften them. In welding, metal producers melt the base metal.
visit our channel to see more videos about the brazing
It’s the same thing.
@@iHeartOiSkanksit's different 😅
@@fitrianhidayat more Jewish lies
Brazing is the method of choice for thin metals (
Excellent.
Nice
🔥🔥
It really annoys me that jewellers say silver soldering when they mean brazing.
That's some bad soldering skills right here , way way overheated
Wear the proper gloves!
Great video 👍🏼
I've recently crashed an MX-5
Lots of hard to reach welds needed.
And more importantly less heat the better.
It's not structural so I'd prefer brazing.
It's thin steel panels.
Please can you advise what brass rods would be best?
And what gas too?
Thanks
Are 9/10 MX-5s rusted to shit or is that just because I live in a rainy country?