I love watching craftsman make cool useful tools. That came out really nice when it was all done much better than anything you could buy. Plus the satisfaction of creating feels good.
Very nice mate, I have had a big bronze nut of a propellor shaft knocking around the shop for years, now you have given a use for it, thanks for a nice vid,, from Australia
I can watch your videos all day long. I've made a couple of projects inspired by you. The ferro rods went down very well with my nephews, they thank you.
Amazing project - just leave out the decorative "stress raisers" on the handle: they transform a modern, elegant design into what looks like a re-purposed chair leg ... I would know, as I am a chair maker by trade and this is how we made our mallets back in the day!
I appreciate every step you made to produce this cute hammer. I saved a rather huge not from a Curby hanger project, she'll be on way to become a shiny mallet
Cool and useful, I might have to try to make something similar some day. Though I don't think the sides of the nut needed the buffing wheel. It might be the year 2020, but not everything _needs_ to be shiny and chrome.
Не не молоток,здесь лучше деревянная кияночка-просто человеку нравится поработать на токарном станке по дереву,у него много творческих фантазий и свободного времени...
What do they say about great minds? I did this on my channel a few years ago with a broken pool stick and some tennis racquet handle heat shrink to make a light mace about 18" long. Your polished head and laithed handle look so much better though. You make me want to buy a laith. Looks great
Thanks! I use the same lights and camera as in my previous 3 videos, Panasonic G80/G85. Only difference is that this time it was full manual mode, while in previous videos it was aperture priority and the camera decided the lighting. Even though I used +3 steps exposure compensation it still was too dark... This time I like the way the video looks, but I overexposed a few shots. I need a bit more experience.
Omule tu ai cam multe talente. La imparteala probabil ai bagat mana si la altii in sac. Tine-o tot asa si daca ai reusi sa postezi mai des eu unul as fi incantat 👌👌👌
Это маразм полный - натфелем края гайки пилить, потом пескоструить , а потом шлифовать болгаркой. Или автор просто хотел показать что у него есть натфиль, пескоструй , болгарка и точило 😒
@@Папингараж.знакомствасинструме ХА ХА ХА !!! Красава . Наличие ЧЮ свидетельствует о высоком АйКью. У обоих Бушей, как пишут, он был ниже 100 ))) , у каждого. Что однако не помешало 12 лет рулить США, в сумме. Камрад, у тебя он как минимум 120 ))), без обиды ))). Кто знает, может и выше 150 ))) УДАЧИ. Береги себя.
Вообще,металлическими предметами нельзя бить по рукояткам стамесок.У меня для этого круглая колотушка.Лёгкая,в руке удобная,нет граней,которые слетают или разбивают рукоять стамески.Дизлайк!!!!
@@ИгорьБалхудер Деньги??? Знаешь, - Идёт съезд похуистов. В кулуарах на перерыве к делегату подходит репортёр: - Скажите Вы похуист? И вам всё реально похую?? - Да. - А вот интересно, а как у вас с водкой? - Ну есть водка - пьём! Нет - похую! - А с женщинами?? - Да также, есть женщины - трахаем! Нет - похую! - А вот с деньгами, с деньгами также?? - А вот с деньгами тут всё подругому! - Ну как же? Неувязочка получается!.. - Да мне похую ваша неувязочка!! ))) -
I can’t tell if this is a Russian or American channel, it looks American but then you got like 50% of the people commenting in Russian, so imma guess both
I love watching craftsman make cool useful tools. That came out really nice when it was all done much better than anything you could buy. Plus the satisfaction of creating feels good.
Me too
Such a simple, but extremely effective design. Very impressive! I might have a try myself.
How did it go?
@@fjaps i ended up getting a bone fracture in my risk and a severe cut from my leg to eyeballs
Yea
What a gorgeous, darling little tool. I giggled with joy watching this!
simply marvelous indeed good sir
You must be smoking some really strong cannabis.... 🤔🤔🤣🤣
That’s creepy
Lay off the soy
That mallet is actually beautiful! That is what I consider to be art! It has both purpose and beauty, for me there is nothing better!
There's something so extremely satisfying, and relaxing, about watching your videos....😁
Yes - his video on how to make a spoon carving knife from an old spanner is _mesmerizing_ ! I must have watched it a dozen times!
Very nice mate, I have had a big bronze nut of a propellor shaft knocking around the shop for years, now you have given a use for it, thanks for a nice vid,, from Australia
he can draw and build , he’s so good like actually amazing
Well, that was enjoyable! I would have never thought about using a big nut like this as a mallet head. Thanks for sharing!
Bruce A. Ulrich can it be any nut? ( ͡° ͜ʖ ͡°)
@@coolspacemonkeywithcigar tf😂
@@coolspacemonkeywithcigar no only my big nut
Excellent job polishing the knob
Nice mallet, it's amazing how well that nut polished up, it looks like chrome.
😏
@@sammythestrawberry1372 I love you💀
I saw a video recently about turning a brass hex nut unto two rinks - they looked lovely!
I like how your videos are all under 10 minutes.
Its so satisfying, seeing you work
Quite inventive idea
Im sure that I have no reason to use this now or in the future, but i want it so badly
You’re well on your way to being a dentist with that in your hand.
I can watch your videos all day long. I've made a couple of projects inspired by you. The ferro rods went down very well with my nephews, they thank you.
That is awesome! Thank you!
@@TheSmallWorkshop Cool Bro.
Amazing project - just leave out the decorative "stress raisers" on the handle: they transform a modern, elegant design into what looks like a re-purposed chair leg ... I would know, as I am a chair maker by trade and this is how we made our mallets back in the day!
F. D. Damn this guy is working
Nice project!
Wood be like:
“I live in Spain but without the a”
Good one gamer
Rather: “i live in Spain without the s”
Or I live in Spain without the I
Without the k. Hahaha
Spin wee
Very impressive!
**Found a old rusty knife in the middle of nowhere*
*
This guy: Stonks
Look
LOL
Very good video's!!!!
Нет, ну Вы видели, что позволяет себе этот токарь?!
Perfect job!
Nice job 👍🏼
Really nice idea. Never thought of that
Looks great.
Great idea. That wedge would look nice with the contrasting wood...
SO COOL!!!!🎉👍🍻
Does anyone finds that the handle part is so satisfying
It is double purpose !!!
Double use !!!
Yes
I want that machine
@@allenmartin7193 😂😂
I appreciate every step you made to produce this cute hammer. I saved a rather huge not from a Curby hanger project, she'll be on way to become a shiny mallet
Cool and useful, I might have to try to make something similar some day. Though I don't think the sides of the nut needed the buffing wheel. It might be the year 2020, but not everything _needs_ to be shiny and chrome.
Looks great
A brilliant idea, my wife is also very taken with it 😉
😜🥳
I like it! Good job...
I would like you to start a real world survival series where you bring all(or some) of your created tools to survive!
Well you got 40 subscribers so good luck with that
funny ideas but you display excellent techniques! great work
Perfect
Perfect spammer😂
Interesting idea for a mallet--it came out really nice!
Two videos in a week.... our cups runneth over.
LOL! I'm lazy... I know...
The Small Workshop- You provide solid content. Take as much time as you need.
Great job man👍
Thanks! 👍
@@TheSmallWorkshop I wish you where my neighbour.👍
What size is that nut? I want to get in to carving and would love to make one like this before I do.
So awesome!
Ну спасибо тебе дружочек тихо мирно лежал на диванчике теперь пойду искать гайку
На ж-д много подходящих, но осторожнее, а то получится, как у Чехова.
Best thing in the world 🌎❤💕
Вы не слышали о таком инструменте Молоток?...
Наверняка он знает о молотке 😆
Просто при некоторых работах такая колотушка предпочтительнее ну и плюс контент 😉
Не не молоток,здесь лучше деревянная кияночка-просто человеку нравится поработать на токарном станке по дереву,у него много творческих фантазий и свободного времени...
Полная хрень.
Это державка для гайки
Uhhhh
Well done
1 вопрос а что молоток уже не модно ?
wow , really enjoyed watching ......you now have a new subscriber
-Has all these tools-
“What should I do?”
Make some more!
Wow he's a good artist
What do they say about great minds? I did this on my channel a few years ago with a broken pool stick and some tennis racquet handle heat shrink to make a light mace about 18" long. Your polished head and laithed handle look so much better though. You make me want to buy a laith. Looks great
Cool
Si este hombre fuera un barbero oh! santas manos que tuviera 🙌
What diámeter is the nut?
Thanks
a very usefull idea you shared
I have absolutely no need for one. I don't even have a lathe or sanding buffer, but I now want to make one.....
Larry 👍
Nice job.
I chuckled when he used the mallet to push in the nut
Lol
I get that you’re trying to make a joke but that doesn’t make any sense
@@wet0wl because hes using the mallet to make the mallet
"I used the mallet to make a mallet."
Very cool.. nice work...
Absolutely fantastic. Really nice job. I'm going to to do the same though probably not to your standard but will try. Love it!
That is the best almond joy thing I have seen yet.
Steve, great video! What video camera model do you use?
Panasonic G80/G85
@@TheSmallWorkshop Sir, do you shoot in 1080p 60fps or 4K?
1080/60fps
@@TheSmallWorkshop Thank you for responding👋
What model JET lathe are you using?
Doing Great on lathe
If you made the handle about two feet long, it would be a great replica for a World War One Trench Mace. Nice job.
great work
Brilliant, I loved it. Now where can I find a humungous nut?
sand blaster is insane inovation, insane tool to own very impresive stuff
It could have been avoided
That's a genius solution, beautiful tool, well done.
Во время косметических процедур, гайка почувствовала себя настоящей женщиной.
During cosmetic procedures, nut felt like a real woman.
Most of your projects are very artistic and unique. I love your clips.
Shouldn't there be two nuts at the base?
Funny guy! The other one might have lost in a tragic lathe accident...
mike underbrink 🤣🤣
Wow really cool project. Thank you for sharing
Thanks for watching!
Great idea. I have a bunch of large hex nuts lying around.
The lighting in this video is really good, what do you use?
Thanks! I use the same lights and camera as in my previous 3 videos, Panasonic G80/G85. Only difference is that this time it was full manual mode, while in previous videos it was aperture priority and the camera decided the lighting. Even though I used +3 steps exposure compensation it still was too dark... This time I like the way the video looks, but I overexposed a few shots. I need a bit more experience.
This is really clever.
Cool!!!
Nice video. This is the first time that I have seen a wood lathe in action.
Так вот что значит: х..ем груши околачивать...
Huh
Could someone translate
This makes me want a sand blaster.
Tool for a wife when husband isn't home :D
Ik I saw it and was like 😬
What is that machine at 1:09 can anyone tell pls?
its called a sandblaster
Что бы не делал , лишь бы не плакал..
Excellent job
Final result looks beautiful! Along the process I was wondering myself what kind of wood did you use?
European walnut. It lost it's reddish hue and got darker in about 24 hours after I finished it.
Me: I know a person on RUclips who might be a crafting table in disguise.
My parents: Sure, now go to bed ok?
Now I just need to find a big bolt fastening device.
Omule tu ai cam multe talente. La imparteala probabil ai bagat mana si la altii in sac. Tine-o tot asa si daca ai reusi sa postezi mai des eu unul as fi incantat 👌👌👌
Multumesc mult! O sa incerc sa postez si ceva mai des, am avut mai mult timp de atelier in ultima perioada...
Это маразм полный - натфелем края гайки пилить, потом пескоструить , а потом шлифовать болгаркой. Или автор просто хотел показать что у него есть натфиль, пескоструй , болгарка и точило 😒
Полный маразм - это писать "натфиль" )
@@СергейВласенко-е5щ ну ты же его понял. А вот "мастера" я нет.
Нет, он перед пескоструем её ещё и зубной щёточкой мыл... )))
К стати, я такое вижу не первый раз, объясните- нафига мыть?
@@Ihor_Zhenchuk Чтоб ворс поднялся, как на древесине)))
@@Папингараж.знакомствасинструме ХА ХА ХА !!! Красава . Наличие ЧЮ свидетельствует о высоком АйКью. У обоих Бушей, как пишут, он был ниже 100 ))) , у каждого. Что однако не помешало 12 лет рулить США, в сумме. Камрад, у тебя он как минимум 120 ))), без обиды ))). Кто знает, может и выше 150 ))) УДАЧИ. Береги себя.
Almost too nice to use! 👍
Вообще,металлическими предметами нельзя бить по рукояткам стамесок.У меня для этого круглая колотушка.Лёгкая,в руке удобная,нет граней,которые слетают или разбивают рукоять стамески.Дизлайк!!!!
Тиски точно как у меня купил при союзе будучи ребенком за 20 р. 60 коп. Наколядовал на Новогодние праздники. Мне 52 до сих пор служат)
Да он им даже пользоваться не будет...сделал ради ролика и закине куда подальше
Great job 👍👍👍👍👍
😝😝😝Безтолковие прекрасно сделаной фигни я ещё не видел
Да и ручка на залупу похожа
what
Sorry I dont speak adidas track suit
Good jobs 👍
Извращенец!)
Beautiful
Cool!
terrific idea. thank you.
А на Фига? Что нет маленьких молоточков? Бред какой-то.
Баловство чисто для просмотров на ютубе
@@potapovus А сколько он потом негатива собирает !!!!???? ЖУТЬ !!!!
На хрен они нужны эти просмотры и деньги за них.
@@ИгорьБалхудер Деньги??? Знаешь, - Идёт съезд похуистов. В кулуарах на перерыве к делегату подходит репортёр:
- Скажите Вы похуист? И вам всё реально похую??
- Да.
- А вот интересно, а как у вас с водкой?
- Ну есть водка - пьём! Нет - похую!
- А с женщинами??
- Да также, есть женщины - трахаем! Нет - похую!
- А вот с деньгами, с деньгами также??
- А вот с деньгами тут всё подругому!
- Ну как же? Неувязочка получается!..
- Да мне похую ваша неувязочка!! )))
-
This is great, maybe this can be my first wood turning project. Thanks for the video....
I can’t tell if this is a Russian or American channel, it looks American but then you got like 50% of the people commenting in Russian, so imma guess both
Well his channel name is in English so most likely an American channel
I do think all the Russian comments are funny tho 😂
Can you do a tutorial on very rusty bolts/nuts. For example in my car the engine in perfectly capable but the sump plug is tight even with breaker bar
Me: sees the word “simple” in the title
Also me: ima make a comment about that