Askm wrwb, Good job , but v waited to get your end comment after using it. Vdo ended in haste. Any way much awaited solution. Cost also not mentioned , Jzakumllah.
Dear I saw the seat alteration video, very interesting video. While watching it raised few questions in my mind, I thought to ask you and hear your feedback on the subject. 1. CG125 seat is hard, why it's seat foam was used instead of any other bike's seat which has softer seat. The thin additional foam is understood. 2. Why only front seat was modified and not the rear, I thought people alter the entire seat as at times you may have a pillion on long rides. 3. How much difference you felt in riding position at you sit higher on altered seat. Handle position and foot pegs are felt lower, plus you face more wind on cruising speeds. 4. In some videos, they cut the original seat foam in half and then fix additional foam and layer, not sure which method is more effective. 5. Last and most important question, would you recommend seat alteration for comfort against some amount of compromise on riding position 😀
Thank you for the questions. Much appreciated. Here are the answers: 1 - I used CG 125's seat. But you can use Moltifoam or any other of your choice. I have tried this and the seat is quite comfortable. 2 - I recommend and do solo rides so I didn't modify the rear seat. Plus, it's comfortable. I have sat on the same bike as a pillion rider for a short ride and it's fine. 3 - The difference is amazing and you feel really good. Plus, I've installed a windshield on the bike also so no direct wind hit on the chest :) (video coming soon for the modifications on whole bike) 4 - Everyone has their own way of doing stuff. For some, this method works. 5 - Yes definitely. Sorry to say this, but the stock seat is shit. You keep sliding towards the tank.
@@mudassirshahzadkk Salam brother. You said you have installed a windshield on your bike, can you please tell me about it what kind of windshield have you installed. Because we find only one kind that comes with the ring and that is just a decoration piece and it doesn't divert wind while riding. JazakAllah
I have used it multiple times now. Once on a relatively longer trip Jheeka gali and back. The seat is really comfortable now. Will try to share my review after a few months also 👍
The motorcycle seat designer keeps more than 7 - 8 points in his mind, and seat stiffness is necessary, for safety and driving control. The local Street designer considered himself, smarter than highly educated, and who used tonnes of hours on R & D.....
I don't agree. Even if Suzuki does some "R & D", the seat has been one of the mostly mentioned problems which is why people go to these street vendors who actually make the seat better and you personally feel the difference.
behtreen bhaai zabardast hogaya
Assalamoalykom
Mashaallah ache information di ha apna taky Jo bhe yi bick lain unko easy hojy
Thank you brother
Jeo Badshaho 💐👌🏻
I suggest to get install new foam of good brand in same way. For better softness and life
Yes that's what I am thinking. I'm thinking to get a small molti foam and install it.
Final modified seat not shown before mesh cover install.
Very good
Oooyy hooyyy.....zabrdst
Askm wrwb,
Good job , but v waited to get your end comment after using it. Vdo ended in haste. Any way much awaited solution. Cost also not mentioned , Jzakumllah.
It's very good. You should use a new foam from moltifoam or any other and it will be more comfortable. Prices mentioned in description.
Dear I saw the seat alteration video, very interesting video. While watching it raised few questions in my mind, I thought to ask you and hear your feedback on the subject.
1. CG125 seat is hard, why it's seat foam was used instead of any other bike's seat which has softer seat. The thin additional foam is understood.
2. Why only front seat was modified and not the rear, I thought people alter the entire seat as at times you may have a pillion on long rides.
3. How much difference you felt in riding position at you sit higher on altered seat. Handle position and foot pegs are felt lower, plus you face more wind on cruising speeds.
4. In some videos, they cut the original seat foam in half and then fix additional foam and layer, not sure which method is more effective.
5. Last and most important question, would you recommend seat alteration for comfort against some amount of compromise on riding position 😀
Thank you for the questions. Much appreciated. Here are the answers:
1 - I used CG 125's seat. But you can use Moltifoam or any other of your choice. I have tried this and the seat is quite comfortable.
2 - I recommend and do solo rides so I didn't modify the rear seat. Plus, it's comfortable. I have sat on the same bike as a pillion rider for a short ride and it's fine.
3 - The difference is amazing and you feel really good. Plus, I've installed a windshield on the bike also so no direct wind hit on the chest :) (video coming soon for the modifications on whole bike)
4 - Everyone has their own way of doing stuff. For some, this method works.
5 - Yes definitely. Sorry to say this, but the stock seat is shit. You keep sliding towards the tank.
@@mudassirshahzadkk thanks a lot for detailed explanation 👍
Point 3 & 5 are considerable...and we should think....:)
@@mudassirshahzadkk Salam brother. You said you have installed a windshield on your bike, can you please tell me about it what kind of windshield have you installed. Because we find only one kind that comes with the ring and that is just a decoration piece and it doesn't divert wind while riding. JazakAllah
Pichley murgard k sath kia lagvaya he??
Aik extra mudguard lagwaya jo ziada safety deta hai pani waghera se
@@mudassirshahzadkk mil jata he asani se market mn kia bol k lea jaye
@@harisnoor7672 yes asaani se mil jata hai. Just bike lejao kisi bhi decoration wale k pas. Main ne rawalpindi se lagwaya hai chandni chowk se.
@@mudassirshahzadkk ok
Seat ki height bht bhr jaty ha. Or aapko aisa lgta ha k truck pay bath k bike chla rhay hn.
Aisa kuch ni hai. Seat is very comfortable.
Behtreen. 👍 👌 👌 👌 👌
Nicely done
Thanks for sharing this video.
Seat Or Fuel Tank Ky Bech mein GAP bohat zyada hai
Wo aap apni marzi se adjust karsakte ho
Abi tk seat theek ha??
Bilkul fit hai.
Do add your feedback in terms of seat comfort after you have used it a bit.
I have used it multiple times now. Once on a relatively longer trip Jheeka gali and back. The seat is really comfortable now. Will try to share my review after a few months also 👍
Lahore ma ha yar ase koi shop?
Kafi hain. Mcload road pe dekh aaen aik Baar.
Your bike model?
2021
Ye shop kha ha Karachi me?
Bhai ye shop Rawalpindi main hai laikin ye sara samaan karachi se he aata hai through samandar
Would u like to share the price of bike??
I got it for 213k pkr.
@@mudassirshahzadkk thank you👍👍👍👍
@@farooqfarrukh4841 you're welcome brother
How much cost it to you
I've mentioned the prices in the description 🙂
seat ki look ka bera-ghark ker dia .
cost ni batai ap ny
Description main mentioned hai bhai
Shop address
The motorcycle seat designer keeps more than 7 - 8 points in his mind, and seat stiffness is necessary, for safety and driving control.
The local Street designer considered himself, smarter than highly educated, and who used tonnes of hours on R & D.....
I don't agree. Even if Suzuki does some "R & D", the seat has been one of the mostly mentioned problems which is why people go to these street vendors who actually make the seat better and you personally feel the difference.
Capatalist mindset no doubt it is right theoretically but the owners knows the pain from thror arses
Brro installment py liya
Main gya installment k liay tha but got it on cash. Installments k liay 20, 25 days ka wait tha.
Installment py video bnaen detail sey bhai
@@shabinashukarallah424 ok will try InshaAllah
530 subscribers 😂😁
Aap bhi karlo to aik barh jaega :-)
Look of the bike totally destroyed
Not totally. It still looks good. Plus, the tank is now secure from any outer scratches.