@@danielr1965 their drill got stuck, mine wouldn’t have. It’s definitely not a Milwaukee or Dewault by long shot but it has more power than is shown. And thanks for correcting, I had a brain dead moment before bed and put torx instead of torque.
@@HARTToolsyou people are so lucky If this would be a hindu festival people will start staying --you are wasting pomkins, Earth will end soon just because you
@@boobye6305 it's called torque setting, haven't you used a battery drill before? .... Sheesh I don't own any HART power tools, but I'm sure they're just fine for the regular homeowner and price point. I do own a HART shop vacuum, and it works great at half the cost of of other "name brand" vacs. All of it's made in the same place anymore anyway, even the big names.
One of my ex's and I would print out jack o'lantern designs, tape them to the pumpkin, trace the picture with a toothpick. Then trace the holes with a knife. Many of you have probably done this. Easy and effective.
@@BallMcLongSchlong 😂🤣😂🤣 , it's kinda like an electric turkey carving saw but for construction , it goes back and forth real quick , but great answer, shit made me laugh ,
@@BallMcLongSchlong wow 😲 I've never even noticed or payed any attention to the spelling , been lyin to myself my whole life , I'm unworthy of it's uses or ever step foot on to another job site 🤦
You gotta carve your top out at an angle so it sits right when you put it back on. I learned that the hard way this year! Also apparently carving them out from the bottom and keeping the stem attached to the top keeps it from rotting for a bit longer.
This looks funny because at the end you have crafted a pumpkin in order to look like a funny face. Incredible idea because the pumpkin is round and faces are also round
When carving a pumpkin you should cut the top at an angle so that the lid doesn't fall in, or an alternative is to carve the bottom so it doesn't sag plus it's easier to insert the candle.
I only buy quality cordless tools. Festool, milwaukie and dewalt. Hart is a great brand for folks who have simple DIY projects that don't require commercial applications. I watched a young man install 84 three O doors in a motel in 12 hours with a hart drill. After those doors, the drill seized up. Little drill works great for simple tasks, so to each their own.
@@HARTTools No THANK YOU! Gettin to work on a couple pumpkins after dinner with my 2 young daughters! Being a single father I appreciate all things that give us new adventures, experiences and memories together! So again thank you!
Meanwhile you laugh that hart tool bound up on a pumpkin
my thoughts exactly
Hell yeah I was laughing
That's some bull. I have the same drill and he has it on the wrong torx setting.. I just used it to drill a 3" hole in a metal barrel..
@@danielr1965 all grammar and spelling police on RUclips are weirdos that’s for sure lol
@@danielr1965 their drill got stuck, mine wouldn’t have. It’s definitely not a Milwaukee or Dewault by long shot but it has more power than is shown. And thanks for correcting, I had a brain dead moment before bed and put torx instead of torque.
Daawww, that's the sweetest friendliest looking jack o lantern ever. So cute.
We like how it turned out too!
@@@(88 να
@@HARTTools so u have pumpkin carving then cuz that won't work on wood
@@HARTToolsyou people are so lucky
If this would be a hindu festival people will start staying --you are wasting pomkins, Earth will end soon just because you
Goofy ah pumpkin 😊
Me: *watching video*
Video randomly: hesomnunamninmonHÆHÆHÆHÆ
Sounded like Sims
I died when the random
"Bahhaaaheha" just came up 💀💔
😂
My daughter on a Thursday night when she tells me she has a book report due in the morning and she didn't read the book.
?
Huh where did this come from
😂😂 120 likes lmao
Bro wyd
Huh
This is fly. I will give you that but I still prefer Hickok45's holloween pumpkin carving a lil better. Lol
Life is good
This is a total dad move right here using power tools to carve a pumpkin lol
That Dad has some colorful nails
I’ve done it for years lol. Drills, saws and dremils
(slaps forehead) woman using power tools like cookie cutter.😂
@@mellow9762its 2023. You can't assume that's not a dad based off the nails or feminine hands.
@@joemann7971stop trynna b edgy kid no Dad with yard tools has rainbow nails lol
You just took my Halloween carvings to the next level.
Lol!
Now imagine doing it with a tool that works…
No can do.
Hart is made by milwaukee
@@TrumpTrain911no its not, they are both owned by a company, does not mean one makes the other you doof
Both Hart and Milwaukee are made by Techtronic Industries as well as Ryobi
Did i really just see a drill bind up running a 2 inch hole saw through pumpkin?
I thought the same thing.
Hart tools has left the chat.
lmaooo
😂😂
What an ad
This pumpkin is really cool, especially those who are dying of hunger will appreciate it.
The pumpkin be having butterflys
Aint gonna lie, I was waiting for the Sawzall to come into action
We'll keep that in mind for the next pumpkin.
@@boobye6305 it's called torque setting, haven't you used a battery drill before? .... Sheesh I don't own any HART power tools, but I'm sure they're just fine for the regular homeowner and price point.
I do own a HART shop vacuum, and it works great at half the cost of of other "name brand" vacs. All of it's made in the same place anymore anyway, even the big names.
@@boobye6305 maybe, it depends on the setting. You can hear the clutch slipping, so it's not like it bogged out.
This facial expression she carved out embodies my twenties!
Lol!
Haha that pumpkin had a happy ending
Awww he looks so happy 😭❤️
The best tool for pumpkins is a small rotary toll, so you can carve fancy designs.
As a Pumpkin I can confirm that this is how we smile
If you turn the chuck back 1 click it's supposed to lock that bit in so it doesn't slip!
Oh my, i got excited about the way she was cutting the top off! Skills
This video is so oddly satisfyingly fresh.
The environment looks beautiful in the background the shavings of the pumpkin looks like you could make left over pumpkin pie with them. So great! ☀️
Don't cut the top of the pumpkin. Cut the bottom out and then you can place your light source on the ground, place the pumpkin on top of the light.
Thank you for the feedback!
U my friend are genius
Happy to help!
Hearts the perfect tool for moms looking to do things around the house
Cute pumpkin vampire 😍 🦇 I love it 💗
Right!?
Awesome pumpkin carving!!🎃
Happy Halloween!! 🐈⬛🐾🕷
You too!
pumpkin with coconut milk and some onions and shreaded leftover fried fish is a wow.
I don't know what's scarie. That smile or those perfect circle eyes.
How did that hart drill even make those holes? I’m impressed!
We used a hole saw bit!
I had a “fully charged” hart drill die after trying to pull one screw out yup just one an it was more like a 1/4 of one
@@HARTTools I think he was being sarcastic honestly
Feel free to dm us on instagram or Facebook and we'd be happy to assist.
Wow!
Thats Genius!!
It's a game changer!😎
@@HARTTools Sure Is!
One of my ex's and I would print out jack o'lantern designs, tape them to the pumpkin, trace the picture with a toothpick. Then trace the holes with a knife. Many of you have probably done this. Easy and effective.
If you cut the top of your pumpkin angle in towards the stalk, ans cut a octagon, it fits back perfectly everytime.
But cool!
Thank you for the advice!
Husband is gonna be pissed with dead pumpkin all over his tools😂😂😂
He'll understand.
there Hart tools I'm sure there not even the husband's I'd hope those tools don't belong to him #QualityMatters
Id be pissed if i came home to Hart tools. Haha
@@HARTTools why did your drill get stopped on a pumpkin bahahahaha
You just put a lot of companies out of business thank you!
Mind-blowing 🤯
It saves time and it's a blast!
Please tell me this is satire these tools are trash the drill barely made it through the pumpkin 🤣🤣🤣
What companies?
@@darebear2438 it was a joke 😉✌️
It's pretty cool what's out of Brazil, but here in Brazil there's nothing much hahaha very creative your idea bro
The least scariest jack-o-lantern ever:
I see, so that is where you use those hart tools
Using power tools and bits to carve a pumpkin, just takes the fun out the entire exercise. Everything is so exact and proportional.
That is some resourceful pumpkin carving
how did the drill freeze up drilling a pumpkin?
It’s Hart.
Walmart brand
They didn’t have it set to drill mode. There is torque settings on almost every cordless drill.
Those hart tools are half decent, same as ryobi no better no worse, probably didn't have it set to drill
HAPPY HALLOWEEN 🎃 to Everyone.. stay safe
Happy Halloween to you as well!
That's pretty cool HART power tools is built by the same people that build Milwaukee.
I can’t wait for my thanksgiving pumpkin pie.
Wow, that’s a pretty weak drill, struggling with a pumpkin
It’s Walmart brand I think lol
@@guchdestroyer it’s a hart, it’s not the worst, actually you had it on low setting, peace
@guchdestroyer it's a Milwaukee brand
what a great idea, love it 🎃
They actually came out pretty good
I was waiting on them to bust out the saw saw lol
the saw saw? the fuck is that? double fisting saws?
@@BallMcLongSchlong 😂🤣😂🤣 , it's kinda like an electric turkey carving saw but for construction , it goes back and forth real quick , but great answer, shit made me laugh ,
@@joeshmoe1436 you're welcome but that's called a Sawzall
Maybe we will next time!😏
@@BallMcLongSchlong wow 😲 I've never even noticed or payed any attention to the spelling , been lyin to myself my whole life , I'm unworthy of it's uses or ever step foot on to another job site 🤦
🥰🥰🥰I thought it was her man until I really looked at the hands ☺️☺️
Man I was really hopeful that they would cut it from the bottom! It’s really cute but that would have made it so much cuter! ❤
Thank you for the feedback! 😊
That pumpkin loos so happy te be given life
You gotta carve your top out at an angle so it sits right when you put it back on. I learned that the hard way this year! Also apparently carving them out from the bottom and keeping the stem attached to the top keeps it from rotting for a bit longer.
Good advice, thanks!
Key hole saws are actually perfect for pumpkin carving
This is like when you see somebody pour the milk before the cereal….
🤣🤣🤣🤣🤓
For real! I was like, why didn't they scrape out the guts BEFORE carving??
Girl knows her way around a 20v!
My father did this with pumpkins when I was in the second grade, the pumpkins came out amazing❤
"HONEY, WHY THE HELL ARE MY TOOLS ALL STICKY AND SCATTERED?"- Husband 7865
62, needed this!! Will have 1 more..😊
Great job!! 😉🎃
You just took all the fun of carving a pumpkin!
Dam that takes the fun right out of it
This looks funny because at the end you have crafted a pumpkin in order to look like a funny face. Incredible idea because the pumpkin is round and faces are also round
😂😂😂 Halloween pumpkins are supposed to looking menacing. This one is really cute.
I could literally smell the pumpkin through the video!!
It's good to see the hard brand good for something good idea
We are happy you enjoyed this!
I’ve had the same hart permanent marker for 2 years and it’s been in my pocket the whole time😂 great markers!
That poor pumpkin, what did he ever do to you, all he does is bring joy to you.
The pumpkin is happy. You saw it's bright smile😄
Hahahaha
Mama,...I'm missing my two teeth...oh honey..pumpkin has them😂😂😂😂
Some good hand action there !
This is literally genius 😮
Damn that hand moves like you have practiced that up and down alot 😂
This just takes the fun out of carving pumpkins
When carving a pumpkin you should cut the top at an angle so that the lid doesn't fall in, or an alternative is to carve the bottom so it doesn't sag plus it's easier to insert the candle.
Thanks for the advice.
I only buy quality cordless tools.
Festool, milwaukie and dewalt.
Hart is a great brand for folks who have simple DIY projects that don't require commercial applications. I watched a young man install 84 three O doors in a motel in 12 hours with a hart drill. After those doors, the drill seized up.
Little drill works great for simple tasks, so to each their own.
Perfection!
Thanks!
Drywall saw is actually a really good idea. Like how come I didn’t think of that?! I commend you.
- Manoo que incrível isso .. Muitoo legal Parabenss por demonstra um pouco .. da Cultura de voocês ..
We are happy you like it!😊
Super cute!!!!!! 🥺
I remember when I made my first Jack'O'Lantern. My hands looked like I stuck them in a jar of razors. Lol
👍 This pumpkin art is really very nice and wonderful. Thank you very much for sharing.
That’s how I get at Halloween also 😂😂😂 fed up
Love women that use tools 💖
Happy Halloween!
That hand grip on the keyhole saw...oh my my my my my, 😘😋😋
Its almost that time of the year again, man im always excited for haloween than Christmas
Looks like Simon
Crockford special 😂
A genius at work.
😎
Turn to be cute halloween pumpkin.😮😮
That drywall saw is actually brilliant 😅
This would be great to create a template on the pumpkin for kids so it's easier to cut out!
That would be a great idea!
Wow! Fast and great work!
Thank you!
@@HARTTools No THANK YOU! Gettin to work on a couple pumpkins after dinner with my 2 young daughters! Being a single father I appreciate all things that give us new adventures, experiences and memories together! So again thank you!
Awesome, hope you enjoy!
The drill was struggling with the hole saw. 😂😂
Was expecting the oscillating saw for the mouth 😂
I love the nails.
Love how it torked out, halfway in first hole 😂
Cute lil pumpkin 🎃
Thanks!
Hey another tip to get rid of the sheet rock hand saw you can use a battery powered oscillating multitool
That's a great idea!
Wow that hart drill is chucking out on a pumpkin🤦🏼♂️ but very clever I love the idea!! Looked great!
Pumpkin farmers : damn that's my advantage..😅
I like your nails 💅😊
There's the right tool for the right job every time
he so happy 😂 sad Halloween is over .
She really put the jack in jack-o-lantern