Just helped me set it up and program a scene; thanks! :-) I haven't tried the 3D viewer yet since I had my lights hooked up but that looks cool. Is it easy to flip a moving head so it appears to be sitting on a totem for programming purposes?
Mike, I'm exploring DMX software. I'm using a Magic 260 board currently. The main advancement or feature I'm looking for is the ability to activate multiple shows at the same time. So for example, I want 4 Martin SCX500 to run a sequence of scenes in a show. Then I want to program some Par can chases into their own show. That way I can decide to launch a SCX show solo or in combination with other fixtures running their own show. Currently, I'm limited to running a single show. So If I want a par can chase sequence and SCX500 at the same time then those scenes need to be programmed at the same time. So every possible variation needs to be programmed into various shows. What I need is a bank of like fixtures to be able to run various fixture specific shows independent of other fixture banks running their own shows. Essentially, a lighting board for each bank of fixtures but linkable. So we could have a scene that specifies SCX bank on show 2, Pars on show 5 and Wizards on Show 2. Then next scene changes to a new set of sequences. Does that make sense? Does this software do this?
hey, I have an Electro 86 LED light and a velleman USB-DMX interface. I'm having troubles controlling the light with freestyler. theres no profile for the E-86 in freestyler, so I added the closest fixture I could, yet when I adjust sliders for color and such, my E-86 doesnt respond at all.
Hey MM,, Thanks a lot for the stuff you keep sharing with us.. very generous of you did exactly what you have advised me to do in this video bu just cant get to see the output on 3D magic once i have patched everything on freestyler 3.2.2 & 3d magic.. there is a Control by freestyler icon on the bottom right hand corner of 3D magic which is not on.. could that be the reason if yes how do i activate it? or is it because i am not using any USBtoDMX attachment Thanks Man
@Furin1 try to redownload it it happend to me in the past I THINK THERE WAS A CHECK BOX when you do the download to install the 3d viewer...I dont use the program anymore but you might want to ask in the fouroums page if that dosent help MM
Good evening friends, I have two movings Head Boomer 575 sixteen channels and use a USB / DMX and would like to configure them in FreeStyler ... I would like to know if you guys could help me configure the sixteen channels to work? Thanks
Thanks for the video but I have question how I can add lights that are not on the system, for exemplo I have some Chauvet Circus, please how I can add to the list to programm Thank for your help
you said the Light you were using did not work properly so try the profile I sent you you might have had a bad light profile Just click on the attachment and it should install automatically Dj Mikey Mike
@bbp546 Sounds like you have a bad load or you didnt check the box for the visulizer I dont use freestyler anymore so Im not to sure go to the fouroums to ask the questions if you try to redownload it also make sure your computer is up to date with all windows updates and drivers mm
Go to Sunlite or nicolaudie com and download the Magic 3D Easy View program and try it. It should have installed when you installed Freestyler. I am not sure why.... Mikey Mike
CMon Mike, you go to the trouble of creating a tutorial then ruin the whole thing by drowning your voice out with pointless inane music. Extremely distracting and makes me want to turn it off. Its like watching a good tutorial while your flatmate has the TV up too loud, I can tell him to turn it off but I cant tell you, so I tell you here. LOSE THE BACKGROUND MUSIC. I cant listen to you constantly competing with the background.
Hey MM,, Thanks a lot for the stuff you keep sharing with us.. very generous of you did exactly what you have advised me to do in this video bu just cant get to see the output on 3D magic once i have patched everything on freestyler 3.2.2 & 3d magic.. there is a Control by freestyler icon on the bottom right hand corner of 3D magic which is not on.. could that be the reason if yes how do i activate it? or is it because i am not using any USBtoDMX attachment Thanks Man
Just helped me set it up and program a scene; thanks! :-) I haven't tried the 3D viewer yet since I had my lights hooked up but that looks cool. Is it easy to flip a moving head so it appears to be sitting on a totem for programming purposes?
Mike, I'm exploring DMX software. I'm using a Magic 260 board currently. The main advancement or feature I'm looking for is the ability to activate multiple shows at the same time. So for example, I want 4 Martin SCX500 to run a sequence of scenes in a show. Then I want to program some Par can chases into their own show. That way I can decide to launch a SCX show solo or in combination with other fixtures running their own show. Currently, I'm limited to running a single show. So If I want a par can chase sequence and SCX500 at the same time then those scenes need to be programmed at the same time. So every possible variation needs to be programmed into various shows. What I need is a bank of like fixtures to be able to run various fixture specific shows independent of other fixture banks running their own shows. Essentially, a lighting board for each bank of fixtures but linkable. So we could have a scene that specifies SCX bank on show 2, Pars on show 5 and Wizards on Show 2. Then next scene changes to a new set of sequences. Does that make sense?
Does this software do this?
Yes do you have a DMX Dongle? Or are you just trying to make a computer light show
i had no idea how to work freestyler until i watched this thanks alot.
www.nicolaudie.com/downloads/files/Magic.exe
What do you do if your lights are unbranded? what do you put in?
the button to view the visualizer is greyed out, and therefore i cannot click it :S
What do i need to download, any ideas?
Thanks
Hi Mike! Thanks for the video, BUT, I HAVE A QUESTION: When i turn on the lights (at 4:15 on the video), my lights start with strobo effect.. Why??
yes but what light are you using in the software?
hey, I have an Electro 86 LED light and a velleman USB-DMX interface. I'm having troubles controlling the light with freestyler. theres no profile for the E-86 in freestyler, so I added the closest fixture I could, yet when I adjust sliders for color and such, my E-86 doesnt respond at all.
hello, my name is andres, I wanted to check because I am practicing with the software and when I turn on the light does not illuminate
Hey MikeyMike, what is your favorite DMX software/dongle combo? Love all the videos you do! Thanks!
Hey MM,, Thanks a lot for the stuff you keep sharing with us.. very generous of you
did exactly what you have advised me to do in this video bu just cant get to see the output on 3D magic once i have patched everything on freestyler 3.2.2 & 3d magic.. there is a Control by freestyler icon on the bottom right hand corner of 3D magic which is not on.. could that be the reason if yes how do i activate it? or is it because i am not using any USBtoDMX attachment
Thanks Man
@Furin1 try to redownload it it happend to me in the past I THINK THERE WAS A CHECK BOX when you do the download to install the 3d viewer...I dont use the program anymore but you might want to ask in the fouroums page if that dosent help
MM
sound where did you get the soft ware
I am not sure Please ask your question in the Freestler Fourom at there web site thanks Mikey Mike
Good evening friends, I have two movings Head Boomer 575 sixteen channels and use a USB / DMX and would like to configure them in FreeStyler ... I would like to know if you guys could help me configure the sixteen channels to work? Thanks
When I press on the light button there appears NOTHING? I dont have a dongle, im going to rent it next week but i want to make my light show already
Thanks for the video but I have question how I can add lights that are not on the system, for exemplo I have some Chauvet Circus, please how I can add to the list to programm
Thank for your help
what kind of light? DJ Mikey Mike
can i get the fixture for mini moving head 7*12w
dj mikey mike is there a way to mirror the fixtures if so
how
Would this work on a 4 channel dimmer pack, can they be patched?
you said the Light you were using did not work properly so try the profile I sent you you might have had a bad light profile Just click on the attachment and it should install automatically Dj Mikey Mike
hi does the vellman dmx deck works on freestyle ?do you have to uninstall the original software?
im not sure
hey what's up Dj mikey mike I haven't taken about 5 hours literally trying to install freestyler to my windows 7 64bit computer do you know how to
not sure what the issue is i havent used the software for 6 or 7 years now
I had the same problem just go to the FreeStyler Support Forum I will put the link in the info area.
Thanks DJ Mikey Mike
thanks it is good need to know how to get the 3d to work my dos not tor on
Velleman and a sunlite thanks MIkey Mike
Bit late but if you have no box connected select Virtual Interface!! to use the 3D visualiser
not sure
@kaney16 PC based control is the way to go!
MM
@bbp546 Sounds like you have a bad load or you didnt check the box for the visulizer
I dont use freestyler anymore so Im not to sure go to the fouroums to ask the questions if you try to redownload it also make sure your computer is up to date with all windows updates and drivers
mm
@mojolama I use showxpress now its great! freestyler is good but I like showXpress a bit better
thanks
DJ Mikey Mike
I hear only backgroundmusic ! No speech or voice over ? Strange
he said it was in wire frame mode try that
@SONIDOPIKACHU try to redownload it ...uninstall and try to reinstall it as it should have loaded on instlation
MM
just a little bit but thanks ! ;)
Im not sure as I havent used this software for years sorry MM
Oh I only know how to get to work on the lights themselves sorry
MIke
same thing happened to me djmatt
You forgot to add the scene to the cue list that's why your tutorial did not work as you had planned ...
Rainier Pinero ser what website can download this application
Just go to the FreeStyler Support Forum for a Manuel thet can help Thanks Mikey Mike
To be clear, he is a DJ....
Go to Sunlite or nicolaudie com and download the Magic 3D Easy View program and try it. It should have installed when you installed Freestyler. I am not sure why.... Mikey Mike
Send me your emaill adderss and I will send you my profile of a Martinscx 500 to try thanks DJ Mikey Mike
Time for some 16:9 screens there..... 4:3 screens are sooooooo 2004
send me a privit email with your email address and I will sent you my profil for a Martin scx 500 to try
Turn the music off. I can't understand you.
CMon Mike, you go to the trouble of creating a tutorial then ruin the whole thing by drowning your voice out with pointless inane music. Extremely distracting and makes me want to turn it off. Its like watching a good tutorial while your flatmate has the TV up too loud, I can tell him to turn it off but I cant tell you, so I tell you here. LOSE THE BACKGROUND MUSIC. I cant listen to you constantly competing with the background.
proebly not lol
Could have picked gayer music?
I can't watch anymore well actually I can't listen to the crap music that is way to load anymore
Hey MM,, Thanks a lot for the stuff you keep sharing with us.. very generous of you
did exactly what you have advised me to do in this video bu just cant get to see the output on 3D magic once i have patched everything on freestyler 3.2.2 & 3d magic.. there is a Control by freestyler icon on the bottom right hand corner of 3D magic which is not on.. could that be the reason if yes how do i activate it? or is it because i am not using any USBtoDMX attachment
Thanks Man