[Stock ROM Dump] Stock ROM backup of Android Car Stereo | Memory Dump Procedure via flashtool
HTML-код
- Опубликовано: 19 окт 2024
- Memory Dump Procedure via flashtool
Hi Friends,
In this video i am going to demonstrate how i was able to take backup of the Stock ROM of my Android Car Stereo.
Note: if your device is not bricked, Make a full backup before trying another firmware.
This information is very basic need for all those who would like to have backup of the stock ROM so that in case of any problem they can reflash the stock ROM or for someone who wants to venture in to the world of Custom ROMs or custom recovery. In case of any soft brick you can always be rest assured that you have back up of your own working Stock ROM.
Also many times we get update to our system and the ugprade may fail for many reasons. In case of such failures the unit may get bricked. Having a ROM backup protects you against such failures.
In this video i will show how i have taken a ROM Dump and how i have converted the ROM DUMP into usable files so that i can also flash only specific region like recovery if i want to flash custom recovery or just restore stock recovery in future etc.
For More details:
1. XDA Link
forum.xda-deve...
2. 4PDA.RU
4pda.ru/forum/...
Others:
4pda.ru/pages/...
4pda.ru/pages/...
Memory Dump Procedure via flashtool:
• Магнитола на Андроид (...
• Магнитола на Андроид (...
(Memory dump is only needed if you need full recovery from a backup. Otherwise you may only need to do the next part.)
Download and install MTK drivers. (Link)
Load scatter file and preloader (Link) in spflashtool. Press Ctrl Alt V , then go to Window and select "write memory". In file path select "user", in begin address put 0x0, In Region select the partition named "EMMC_USER". Hit Write memory. After that plug in the usb cable (connected to usb1 port). If the device is not detected, you need to power it on. If still not detected then you might need to short the two test points (see picture) (without power this time) and then plug in the usb cable. Remove the short when write process starts. Check if the issue is fixed. If its not fixed, then do the same to write boot2 and boot1 partitions as well. You may need to download Boot_1 specific to your original firmware from the link above.
Make a Full Backup/Memory Dump:
Open SPFlashtool, Select Memory Test Tab, Select only RAM Test (uncheck the rest), push start, and connect the unit. Save the information appeared, in a text file for later. (Read above "Memory dump procedure" for the usb connection setup).
Now go to ReadBack Tab, Double click on empty space next to tick mark, Select a folder where you want to store the dump file, and Type a name for the dump file you are going to creat, (ie. Boot_1, Boot_2, USER). Click Save. In next window "Readback block start address", select the region you want to make backup of (ie. EMMC_BOOT_1, EMMC_BOOT_2, EMMC_USER).
Start address is 0x0000000000000000
Length copy and paste from the text file you created earlier.
typically for Boot_1 and 2 the length is 0x0000000000400000
and for USER (16GB models) the length is 0x00000003a8000000
and for USER (32GB models) the length is shown in the video already
Click OK.
Now click on Readback and then connect the unit via usb cable. and Read process will start.
Do the same to make backup of all three partions. USER will take long time because its the largest partition.
Please how do I flesh my car android, it doesn't want to start, it keeps on restarting each time i on my car
Same with mines how do I correct this problem
my android head unit is stuck logo android. however, when plug usb 4pin ( connect laptop - android head unit ), then PC not dectect port (COM). how to fix. thank you. model: YT9213AHJ
VERY HELP FULL VIDEO,,,,THANX SIR ,,,,
I have the same unit and I made the scatter file, during the ram test I got this error "s_dl_get_dram_setting_fail (5054)" Please help..
i upgraded 8227l use pc usb ,but now android player can't turn on black screen,and the usb connection ther pc does not respond , can help how to do ?
I’ve Arm Cortex A7 CPU what type of empty- scatter i’ve to create? Thanks in advice
Fellow do you jknow where is the AC8257 testpoint located ?, I need to reflash my board as it stucks in the boot animation, no more !
I reflashed the radio with the files sent by the supplier and it no longer gives image. I have an AC8257, were you able to solve your problem?
i went through some kind of firmware upgrade to my 1GB/16GB but got it bricked, i still can connect it to the laptop but it's not booting up,,,, any solution please ?
I hope you had taken backup of your original ROM before proceeding. You can just reload that ROM again. Else you will have to find another ROM which is compatible with your head unit.
I won't be able to tell which particular ROM unless I know details of your head unit.
How about Allwinner chipset? If this way can work?
Waiting for such kind of video for alwinner t3 chipset
There is a wealth of information in this video which could have been useful with good English sound.
Do u want me to make the video in English also...
@@amargaikwad I am afraid it is too much to ask (if you do try to make the sound clearer). Maybe it would be possible to add English subtitles ? Or English step by step procedure ?
Well personally I think reading subtitles and watching video is distracting... I would accept your suggestion and happily try to re do same video with English. Thanks for constructive suggestion.
@@amargaikwad That would be nice. I am new in this area and trying not only to learn how to backup / restore / flash new firmware but also understand what I am doing.
@@amargaikwadYes sir.. please make video in English
Amar Bhai jab bhi mai ye mediatek sp driver install kar raha hu ye likh raha hai
The INF file you selected does not support this method of installation error aa raha hai ,kya kare ???
Try to disable driver signature verification in windows and then install from device manager
can you please tell me or send link of procedure of flashing B927B0016 2/32 based on mtk8227L
Procedure is same as explained in the video
Sir agr androi car stereo hang hojae logo pr hand rhe to uska software hota hai o bh flash tool k through hota hai uska poora treeka btadain ap software krne ka aur wo software ka link bh dedain plz takai ham bh easily wo software krsken
Software load Karen ka tareeka aur software different Android stereo ka different hota hai.
Sir mery pas yt 9216BJ KA ANDROID board hai sir uspr logo hang horha tha uspr mainai software kya ma software nh karparha mainai kya tha par kuch errors ary hain uspr phr jab dubra test krny k lye hmny lcd par board lgya to blkl blank hogyi screen logo bhyi hat gya sir esa kya kya hai mainai jissy ye hua qk mjhsy ese 2/3 board hochukai hain kindly help me sir
Wrong rom flash kiya to esa hota hai
Sir aap isi model ka file download link aur kese flash kare ye bta dijiye please sir@@amargaikwad
Sir please tell me this stereo bluetooth version my version is very old
Bro will u please tell me last mai when u use rom _2 uss k baad download kaise karna hai
I didn't understand your question.... Aapne just convert karna hai sp flash tool compatible and use karna hai
Maaf, ada file android YT9260?
bhai mera usb detect nahin ker raha system main ..what to do ? mera cruze ka full screen android system ahi
Go to engineering mode and change USB mode between host and device. Kisi ek main detect hoga nai to fir PCB pe shorting karna padega
@@amargaikwad Thanks dear to manage your time to revert me .Till now I am not sure how to enter in engineering mode and change the setting however I tried and searched for development option .
android unit 9218DL 2gb/16 gb durind upadte by pendrive go blackout screen, plz how to install full flash file?make video or give some suggetion?
You might have flashed a wrong rom. You might have to get it done on PCB level now using compatible rom
Bhai sahi hua aapka ya nahi ???
is this allwinner quad-core t3 p1?
No
es work ke liye laptop konsa use kere sir
Koi bhi....
Yt3560 2-32gb
You can help me install it???
How can I help? I have not tried it before.
any way to flash ts7 head units?
Where there's a will there is a way.... Actually i don't have any unit so never tried it. But sure it can be.
@@amargaikwad yes you are right…but i do not find any test points or dnt know which tool i have to use
@@rajuradios right now same with me. If i get it i will try to find
@@amargaikwad can you share your contact no. sir?
i got the pc tool for ts7 flashing
Are bhai file link kaha hai 9270b ki
Will this work on a Caixi Car Android Radio?
I am not sure.
Lets say I have an mtk 8227 head unit and I want to back it up. I see that I need a scatter file for it. Where do I get it from ?
Please watch my video till last.
you can generate a dummy scatter file and then regenerate your own scatter file from the ROM already present in your head unit. I have demonstrated that complete procedure...
@@amargaikwad
Thank you. I thought so. Hard for me to follow.
Give me suggestion how can I make it simple to follow
@@amargaikwad For me English subtitles would help.
Thanks for suggesting. I will upload this video in English Audio soon.
18:50 instructions uncleared where you clicked.
Sir can i contact you?
sir Bangladesh
Salam bhai
Contact nambar apna
Salam
Bhai kase ho
Kham sa ho ap
Khan
Your video is song problem
Hey i have ts10 brick logo Android i need re install with flashtools How i do i need ROM my IS this
TS10.1.2_20220514.130539_TW1-V2.
hi bro i
, you can help me how to do ?
Yup
@@amargaikwad so how to can do ?
Restore the original ROM from OEM
@@amargaikwad now player can't connect usb pc how to do can connect ?
@@amargaikwad bro you have use whatsapp i can whatsapp you 😊