🔔Help Electro Academy grow! 🔔 Your support can make a big difference! 😍 If you appreciate the efforts behind these educational videos, please subscribe - it’s free and just a click away.!🙏🏽 Additionally, if you can contribute, you can become a patron and support our mission of sharing knowledge with students and professionals around the world: patreon.com/ElectroAcademy 🙌 I am deeply grateful to our first sponsor! Your kind gestures motivate us to continue creating quality content. Let’s build this community together.!🏆 THANKS .! - Sudarshan, Creator of Electro Academy
You should show the schematic diagram so that the people can understand. Nobody can predict if the wiring you show will work without schematic i can not understand this but anyway thanks for your effort.
Please, just give me a brief write up on how to used the stop and start button. Is it that if the generator turns on automatically and you don't need it at the time, you'll just push the stop button to turn off the generator?. Then, when you need to start the generator later again, you just push the start button and the generator turns on.. I'm i correct?
Hi...please hurry up with the new sketch that includes the start - stop push button and the emergency button and a selection key with 3 position H-0-M (1-0-2)...It will be a complete sketch if you also include a switch key with 3-position (H-0-M) and also useful and also useful for manual operation.
can you please explain how and what to add to the circuit to protect components like the contactors coils from main power issues like surges or brownouts etc. ? many thanks for the great video
You should have an Surge Protection Device and other protection devices such as Over Current Protection Device. Please get help from a good electrician on this.
Please, I have a question to ask and i need response sir . The Timer relay and DPDT relay you used for the start and stop of the generator, are they DC or AC
@ElectroAcademyEA wow! So if im designing this ATS im gonna get 12V DC timer and same 12V DC relay timer since they'll be powered by the generator's 12V battery. Also, it's obvious the timer, relay and contactors you used for the grid and generator supply are all AC components only the components powers by the generator battery are 12V DC
@@ElectroAcademyEA Please, just give me a brief write up on how to used the stop and start button. Is it that if the generator turns on automatically and you don't need it at the time, you'll just push the stop button to turn off the generator?. Then, when you need to start the generator later again, you just push the start button and the generator turns on.. I'm i correct? Please, respond to this Thanks
Can this turn on a diesel generator automatically when the grid goes off. Also, for a diesel generator, is there any other component connected in side the generator to support the automatic changeover?
@@ElectroAcademyEA ok. I thought there should be a signal wire that should send signal to the diesel generator. For instance, in a small generator without battery and key starter, a signal wire is connected to the of and on button of the small generator and this helps to switch off the generator when the grid is restored. So for the diesel generator, is there no signal wire. However, I'll be glad if this connection turns on the generator automatically when the grid goes off. Thanks
@@ElectroAcademyEA please, is there and other connection done at the generator side to support the automatic changeover?. Because in the course of your explanation, you mentioned solenoid starter, so do i need to install a solenoid started in the generator so the ATS can work. Please, educate me Can you kindly explain the termination at the generator side. You can also drop your WhatsApp number too for effective questions on this ATS. Thanks
Very good explanation...but I want to introduce a selection key with 3 position H-0-M (1-0-2)...how should I introduced it in electrical conexion? Please make a sketch with it.
Switch for automatic and manual position selection, and the emergency stop button connections are not shown here because the video is going to be too long. I'll make a short video soon, including all those connections.
@@ElectroAcademyEAthanks for this detailed explanation. The switch for Automatic/Manual with the emergency button would be amazing... can't wait.. keep up the great work.
I know, it is some what complex and difficult to follow, because every thing has been included in a 15 minuet video.👀 Some areas, you need to pause the video or rewind it, to absorb the full explanation correctly. This video is done after uploading a simple video previously on the same topic. If you have not seen that video, you can go to the following link to watch it. ruclips.net/video/WKh5D4jTwKQ/видео.html Thank you 🙂
The use of two contact open and do ATS, is not safe, when the current is large contact head temperature is high, so that the contacts fuse and can not be separated, the other switch on, the circuit will be made to safety hidden advantage. I encountered a situation is the motor from the Y connection to the delta hair, the above sexual condition, the result is the explosion of the switch.
When using magnetic contactors, you can introduce a safety relay to identify contact welding situations in it. Video on Below link explains how to fix a safety relay to a circuit. ruclips.net/video/emp0T_kTsc4/видео.html
But I have a question... if one of the contactors get stuck, wouldn't the auxiliary contacts also get stuck? Or not necessarily? I'm asking this because if the interlocking is done between both contactors through the auxiliary contacts... wouldn't this be considered a safety layer or is a safety relay still needed?
First you click "CC" tab on video screen. Then go to settings and click "Auto-translate". You will find lot of languages are there. Click "Urdu" and you will get subtitles in Urdu language.
🔔Help Electro Academy grow! 🔔
Your support can make a big difference! 😍
If you appreciate the efforts behind these educational videos, please subscribe - it’s free and just a click away.!🙏🏽
Additionally, if you can contribute, you can become a patron and support our mission of sharing knowledge with students and professionals around the world: patreon.com/ElectroAcademy 🙌
I am deeply grateful to our first sponsor! Your kind gestures motivate us to continue creating quality content. Let’s build this community together.!🏆
THANKS .!
- Sudarshan, Creator of Electro Academy
I am watching from Liberia, I am also excited about your explainaton
Thank you
Well irrustrated but schematic drawing will be very vital thanks
Sorry, I don't have the PDF drawings with me.
You should show the schematic diagram so that the people can understand. Nobody can predict if the wiring you show will work without schematic i can not understand this but anyway thanks for your effort.
Thank you
Please, just give me a brief write up on how to used the stop and start button.
Is it that if the generator turns on automatically and you don't need it at the time, you'll just push the stop button to turn off the generator?. Then, when you need to start the generator later again, you just push the start button and the generator turns on..
I'm i correct?
Hi...please hurry up with the new sketch that includes the start - stop push button and the emergency button and a selection key with 3 position H-0-M (1-0-2)...It will be a complete sketch if you also include a switch key with 3-position (H-0-M) and also useful and also useful for manual operation.
Will do a video on this when time permits.
Nice information
Thank you
can you please explain how and what to add to the circuit to protect components like the contactors coils from main power issues like surges or brownouts etc. ? many thanks for the great video
You should have an Surge Protection Device and other protection devices such as Over Current Protection Device.
Please get help from a good electrician on this.
Please, I have a question to ask and i need response sir .
The Timer relay and DPDT relay you used for the start and stop of the generator, are they DC or AC
Those are 12 volts DC powered units, since these work using generator Battery power.
@ElectroAcademyEA wow!
So if im designing this ATS im gonna get 12V DC timer and same 12V DC relay timer since they'll be powered by the generator's 12V battery.
Also, it's obvious the timer, relay and contactors you used for the grid and generator supply are all AC components only the components powers by the generator battery are 12V DC
Yes
@@ElectroAcademyEA Please, just give me a brief write up on how to used the stop and start button.
Is it that if the generator turns on automatically and you don't need it at the time, you'll just push the stop button to turn off the generator?. Then, when you need to start the generator later again, you just push the start button and the generator turns on..
I'm i correct?
Please, respond to this
Thanks
Can this turn on a diesel generator automatically when the grid goes off.
Also, for a diesel generator, is there any other component connected in side the generator to support the automatic changeover?
This system can start a diesel generator automatically and load it, when grid power goes off.
@@ElectroAcademyEA ok.
I thought there should be a signal wire that should send signal to the diesel generator.
For instance, in a small generator without battery and key starter, a signal wire is connected to the of and on button of the small generator and this helps to switch off the generator when the grid is restored.
So for the diesel generator, is there no signal wire.
However, I'll be glad if this connection turns on the generator automatically when the grid goes off.
Thanks
@@ElectroAcademyEA i took my time to watch closely and examined the illustration and it's perfect.
Thanks
@@ElectroAcademyEA please, is there and other connection done at the generator side to support the automatic changeover?. Because in the course of your explanation, you mentioned solenoid starter, so do i need to install a solenoid started in the generator so the ATS can work.
Please, educate me
Can you kindly explain the termination at the generator side.
You can also drop your WhatsApp number too for effective questions on this ATS.
Thanks
Je vous donne courage
Thank you
Hi sir we have a 400V 3 phase generator with ATS, the time delay when a power supply is off is 30-35 secs. Is that okay?
A 30-35 second time delay for an ATS to activate after a power supply failure is generally considered acceptable.
Can you provide this in the schematic diagram, please? That would be awesome and I am desperate about it.
Sorry, I don't have PDF drawings of them.
Nice one, but please for my single Phase generator what do i do to the choke?
Thank you.
For single phase generator, please go to this link video, ruclips.net/video/dTCX9dIZIUk/видео.html&feature=share9
Very good explanation...but I want to introduce a selection key with 3 position H-0-M (1-0-2)...how should I introduced it in electrical conexion? Please make a sketch with it.
Switch for automatic and manual position selection, and the emergency stop button connections are not shown here because the video is going to be too long.
I'll make a short video soon, including all those connections.
@@ElectroAcademyEA Thank you very much...I will wait for it as soon as possible...
@@ElectroAcademyEAthanks for this detailed explanation. The switch for Automatic/Manual with the emergency button would be amazing... can't wait.. keep up the great work.
This video is good but must of the wiring is not visible because of the written explanation.
If you can manage without subtitles, you can remove it by clicking "cc" tab on the screen.
Good information but you need to do this practically.
Basic setup is this.
Mainly I did this for the ones who are desperate to learn how generator is automatically starts using the ATS.
Please drop your WhatsApp number or mail.
So i can message you@@ElectroAcademyEA
Would you please share the single line diagram sir? thankyou
Sorry, I don't have PDF drawings of them.
is it possible to do it more complex, in this way is to simple! :)
I know, it is some what complex and difficult to follow, because every thing has been included in a 15 minuet video.👀
Some areas, you need to pause the video or rewind it, to absorb the full explanation correctly.
This video is done after uploading a simple video previously on the same topic.
If you have not seen that video, you can go to the following link to watch it.
ruclips.net/video/WKh5D4jTwKQ/видео.html
Thank you 🙂
💖💖💖✌️👌
Thank you
for generator i think we need under voltage over voltage and phase failure relay
Generator itself has an AVR (Automatic voltage regulator) fitted on it.
I will love to no more concerning ats
Thank you
Can you provide schematic diagram please
Sorry, I don't have PDF drawings on these.
The use of two contact open and do ATS, is not safe, when the current is large contact head temperature is high, so that the contacts fuse and can not be separated, the other switch on, the circuit will be made to safety hidden advantage.
I encountered a situation is the motor from the Y connection to the delta hair, the above sexual condition, the result is the explosion of the switch.
When using magnetic contactors, you can introduce a safety relay to identify contact welding situations in it.
Video on Below link explains how to fix a safety relay to a circuit.
ruclips.net/video/emp0T_kTsc4/видео.html
But I have a question... if one of the contactors get stuck, wouldn't the auxiliary contacts also get stuck? Or not necessarily? I'm asking this because if the interlocking is done between both contactors through the auxiliary contacts... wouldn't this be considered a safety layer or is a safety relay still needed?
This video change in udru language plz
First you click "CC" tab on video screen.
Then go to settings and click "Auto-translate".
You will find lot of languages are there.
Click "Urdu" and you will get subtitles in Urdu language.
But I could not see the ellustration bc of the writings
You can remove these writings by simply clicking or touching the "CC" tab on the screen.
I need circuit b00k
Sorry, I don't have PDF drawings of them
the bad way to explain ! in electricity we use schematic diagram for wiring devices . relay ; contactor etc are not the same in all marc
Sir pls can stop showing this front write up
You can stop these subtitles appearing by clicking the "cc" tab on the screen.
I learn today thanks
Pls can’t u explain it in twi
Sorry, I will not be able to do it at present.