Hi can you help with 4 wire tx & rx on a 360 vision predator camera with the wiring of 360 Visions Predator CCTV System? I have wired it through the Matrix Control Unit16/2 -and the joystick VKXM-0845-EU controller with RS485 cables, all that is coming out of the camera is a bunch of wires that have been chopped off. I have managed to identify all of them, but am unsure as how to wire the 4 wire twisted pairs, i.e., Red & Orange TX/ and Purple & Blue RX From the camera do they go to the matrix or the controller, and which pins on a RJ11 6 wire plug? any help would be very much appreciated as 360 vision diagrams only cater for the special power supply connector board, there seems to be no circuit diagrams available, I can supply pictures...
Default there is no password on a smartwares DVR. If you forget your password, you can remove the battery in some smartwares models and reboot. But .... sometimes removing the battery resets only the clock and not the password on smartwares.
that is the best video i have ever seen about ptz cameras. you explained everything pretty clear. thank you
Hi can you help with 4 wire tx & rx on a 360 vision predator camera with the wiring of 360 Visions Predator CCTV System? I have wired it through the Matrix Control Unit16/2 -and the joystick VKXM-0845-EU controller with RS485 cables, all that is coming out of the camera is a bunch of wires that have been chopped off. I have managed to identify all of them, but am unsure as how to wire the 4 wire twisted pairs, i.e., Red & Orange TX/ and Purple & Blue RX From the camera do they go to the matrix or the controller, and which pins on a RJ11 6 wire plug? any help would be very much appreciated as 360 vision diagrams only cater for the special power supply connector board, there seems to be no circuit diagrams available, I can supply pictures...
You are the best! Keep going! Thank you!!!
Thanks.
Clauidemir Thanks for the great info on CCTV systems, i appreciate your knowledge.
You're welcome. Keep following the new videos.
Thank you so much!
If the dvr does not have connections points to connect the ptz camera to it, what is the next option to connect it to the wifi with a cable??
Hi, i'm interessted in the IP PTZ camera, which volume or the ultimate security guide explains it best?
Thanks
Can you attach 2 PTZ cameras rs485 cable directly to the dvr instead of piggybacking ?
✅ The Ultimate Security Camera Guide V1
learncctv.com/ug1yt
▶️ Video Course - Free Trial - learncctv.com/skill-ytc
If I spliced Would I be able to use a phone cable to connect a ptz camera
Yeah, you can do that.
Can Pelco P also be used for Dahua?
Yes. Pelco P is a universal protocol and others manufactures include it on their cameras.
SIR U R AWESOME
Thank you...
You are welcome
thank you
So good
Damn so you gotta have the bnc coaxial cable, the 2 for audio, 2 for power plus the 2 for the rs485… jeez.. thats too many friggn cables..
Tnx
Works also on Smartwares. for a DVR830S use SuperPassword2
Default there is no password on a smartwares DVR. If you forget your password, you can remove the battery in some smartwares models and reboot. But .... sometimes removing the battery resets only the clock and not the password on smartwares.