I just came across this been swaging for quit a few years. Did Richard make these dies for you? I have the Walnut Hill as well. I would love to have some dies made up in 25, 35, and 457.
Hello I bought it on a drum and cut it down to length suitable to fit in to a air tight pasta container , I buy from a company In Rotherham,South Yorkshire
@@Premierslugs There are some people out there who tap the die with a hammer to form the pellet. If you google for images you'll see them. Manufacturer name was "Star" something, but I couldn't find it for sale. Allegedly the "Star" die is about 200 dollars, so it's much more affordable.
Hi bud just found your site if you don’t mind me asking where did you get your press and dies from I got .25 would like to have a go at making some many thanks john Anglesey north wales
Hi I bought it used from a guy in Telford , the press is a Corbin walnut hill and are still available on the Corbin website in the Us , they are quite expensive though dies are Approx £550
Bellissima ,io ho cercato tanto lo stampo per fare pellet 5,5 ma l unica cosa che ho trovato arriva dalla Cina e faceva 5 pellet alla volta ,il problema è il costo molto alto ,900 euro più 300 euro per spedirlo in Italia,ho pensato anche a farmelo da solo ,ma troppo difficile .comunque la tua è una bellissima macchina complimenti 👍 saluti dall italia🇮🇹🇺🇲
Good morning, welcome, I want to buy a press like this one and the piece. Is it possible to have the dimensions and measurements if I want to make one like this? Thank you.
@@Premierslugs ah ok thanks for that, im using a gmi swager, saves a fortune on slugs, where do you get your lead wire, i cast my blanks as im a roofer in london i get a lot of lead but the wire looks quite handy.
@@PeakyBlinder I buy it from a place call heaps In Rotherham they will make it pure lead or add tin or whatever else you want and also swage it to the diameter you want too
Спорт
Nice press! Auto ejector speeds up the process a lot
Thanks for sharing this valuable information with us.
Круто! Подход вообще огонь
Super great Video
Thanks
Thank you for sharing the process.. I can think of a number of Improvements you can make however .. if you want to hear it
Yes I’m all for any improvement
Where have these been all my life, need one above all else, except food and water, sex depending if someone else is involved.
I just came across this been swaging for quit a few years. Did Richard make these dies for you? I have the Walnut Hill as well. I would love to have some dies made up in 25, 35, and 457.
Mantap👍 mimis slug
Hi, great video but where do you get or make the lead rods you are using? Thanks
Hello I bought it on a drum and cut it down to length suitable to fit in to a air tight pasta container , I buy from a company In Rotherham,South Yorkshire
Need one of those to make my slugs for the .35 cal aea I got
They are excellent just buy the die and you can make whatever cal you want
@@Premierslugs where’s the best place to buy the die from
@@tedshickell7315 the only place is Dave Corbin , Google them ping them an email and they will sort you out
Looks fun. Where do you get the lead wire from in the uk
Hello I buy it from Heaps in Rotherham
Can you buy the dies to make fx type hybrid slugs. Looking great.
You can yes , but that’s a two part process,first the die makes a u shaped tube sides and bottom then the next die forms the tip of the slug
Great video could you please help me out to get this die setup only without press.
Thanks
I honestly don’t think that would be possible
@@Premierslugs There are some people out there who tap the die with a hammer to form the pellet. If you google for images you'll see them. Manufacturer name was "Star" something, but I couldn't find it for sale. Allegedly the "Star" die is about 200 dollars, so it's much more affordable.
Where could I get slug tool kit,please sir?
Hi bud just found your site if you don’t mind me asking where did you get your press and dies from I got .25 would like to have a go at making some many thanks john Anglesey north wales
Hi I bought it used from a guy in Telford , the press is a Corbin walnut hill and are still available on the Corbin website in the Us , they are quite expensive though dies are Approx £550
I have the same Swage press, It's a walnut hill from r c e.. Where did you get the die?
The die is a Dave Corbin with an adapter to suite the presss
Bellissima ,io ho cercato tanto lo stampo per fare pellet 5,5 ma l unica cosa che ho trovato arriva dalla Cina e faceva 5 pellet alla volta ,il problema è il costo molto alto ,900 euro più 300 euro per spedirlo in Italia,ho pensato anche a farmelo da solo ,ma troppo difficile .comunque la tua è una bellissima macchina complimenti 👍 saluti dall italia🇮🇹🇺🇲
you buy in china.? how to buy it. I'm from Indonesia
How do you make the long 5mm wire core. Look like it might be about a foot long
Hi I buy it on a roll and cut the that length just so it fits in my airtight box
Need some for my fac sumatra .22
How to order the tool
Quero comprar uma máquina dessa vc vende?
Qual valor de uma presa dessa e envia para brasil
Boa tarde, Amigo!
Quanto custa essa prensa e a forma para slug hollow point?
Você tem um número de WhatsApp para conversarmos melhor sobre a prensa?
Good morning, welcome, I want to buy a press like this one and the piece. Is it possible to have the dimensions and measurements if I want to make one like this? Thank you.
Hi I didn’t make the press , It’s from Richard Corbin and the dies from Dave Corbin
Awesome machine..can i buy this machine from you,im from Philippines.
Hi they are made and sold by Corbin manufacturing
Any suggestions on where I can het the equipment please?
Hi All can be bought from Dave Corbin or Richard Corbin , they are two brothers but have separate business
Is there a website to get this press im new to this
@@hectorgonzalez7416 hi you would just have to Google them
How could I buy .177 pallet mold like this .....please inform me
You would have to contact Corbin
Hola
Tienen precisión a 100 yardas ?
They are doing just over one hole at 50 yard and sub moa at 100
interesting can i get that tool
Yes Google Corbin press
what is the price if I want to buy the press tool?
It’s not for sale
How much was the setup? Thanks
Hi I actually got mine used in the UK for £720 but I have bought dies lead lube ect on top of that , new it would be around £2000
😳 2000£ 😞
Where did you get that lead wire from
Heaps in Rotherham,South Yorkshire
@@Premierslugs cheers,
I cast mine,
But it's always easier to cut them.
@@Premierslugs I'm in London Mick,
How much do they cost you.
I guess it would depend on how much you buy , give them a shout ,being as heavy as it is delivery ignite e expensive ?
Dollar price
Como le hago para conseguir una así pero en 5.5
esto es en 5.5 .217
Good evening, how much would you make a complete set of this for the caliber 6.35 mm or .25 ??, I am interested in buying
Hi I don’t make them sorry , contact Dave Corbin in America
@@Premierslugs Thanks for answering, but how do I get in touch with this person or company?
@@robertocosta5727 www.corbins.com/airgun.htm
Thanks
How much it is?
Not selling but about £2000 new
Без молотка не кашерно😂
I have no idea what that says sorry
what swager is that please
Hi It’s a Richard Corbin chestnut hill , basically the same as the mega mite from Dave Corbin
@@Premierslugs ah ok thanks for that, im using a gmi swager, saves a fortune on slugs, where do you get your lead wire, i cast my blanks as im a roofer in london i get a lot of lead but the wire looks quite handy.
@@PeakyBlinder I buy it from a place call heaps In Rotherham they will make it pure lead or add tin or whatever else you want and also swage it to the diameter you want too
@@Premierslugs I could detect your sheffield accent,
@@mikesmith8313 No not from Sheffield , live in Barnsley,but from Hemsworth lol
Please 🙏🙏
Price ??
They are about £2000
@@Premierslugs wow 🙏
Speaking louder would help. Please.
Bagrmana sy bisa memeblinya ?
Kirim indonesia cal 177
Hello, please give me a helping hand!!!!!!give me the dimensions of your abs, I want to copy...no one wants to help, they only think about money.....
Hello I didn’t make the press
Do you make the dies if so please email me.