I'm new too airsoft and was curious if its easy with this gun to lower the fps. I think it is because you can take the spring out pretty easy, but I want to be sure.
Hey Gilles Joren it's easy to change the spring to lower the fps, but.. when you do that you'll need to replace the bucking to a 50, or 60 degree bucking! The stock one is higher, and was suppose to support higher fps. If you don't change the bucking your bb's will get jammed inside, and misfeed.. For a temporary fix you can spray some silicone oil inside the bucking, but.. I don't recommend this method for long term use.
Yes. If you want to titan it, get the mosfet version. The gearbox on SSS version has a big square gap in it and I don’t think that a titan could be installed in it. But titan can be easily installed in a mosfet gb with very slight sanding
Is this gun front heavy at all? Cause even if it isn’t, I plan on getting the ICS UKSR stock and putting it on this gun when I get one. What do you think? Would you say it’s front heavy?
Hi Thanks for asking. It's not front heavy at all. very well balanced. The UKSR and original stock are pretty heavy and kinda balance the gun very well.
It’s also worth mentioning that the S3 E-trigger model comes with full metal internals (just like the nozzle) while the standard mosfet version comes with plastic and very little metal internals. For $30 more, go for the S3 E-trigger model!
Hey there mate, this was a really nice review of this gun, that i was waiting for. It would be great if you made another review about the distance that you can shoot with this replica outdoor. Keep up the good work!
I'm new too airsoft and was curious if its easy with this gun to lower the fps. I think it is because you can take the spring out pretty easy, but I want to be sure.
Hey Gilles Joren it's easy to change the spring to lower the fps, but.. when you do that you'll need to replace the bucking to a 50, or 60 degree bucking! The stock one is higher, and was suppose to support higher fps. If you don't change the bucking your bb's will get jammed inside, and misfeed.. For a temporary fix you can spray some silicone oil inside the bucking, but.. I don't recommend this method for long term use.
Do you think i can Gate Titan mosfet swap this gun? Good and complete review btw!. Regards from norway.
Yes. If you want to titan it, get the mosfet version. The gearbox on SSS version has a big square gap in it and I don’t think that a titan could be installed in it. But titan can be easily installed in a mosfet gb with very slight sanding
@@callsignpers5475 thx for the answer! Gonna look out for this one.. it hasnt realeased to all countries yet, so.... let the waiting game start! 😅
this pdw has a standard barrel nut and buffertube attachment? i want different furniture for it if i do end up getting one
Hey what’s the” tool for removing front set” . Bought a used one but it didn’t include that tool
It’s a barrel nut wrench made for removing the handguard. Something like a bent fork with only two teeth
Is this gun front heavy at all? Cause even if it isn’t, I plan on getting the ICS UKSR stock and putting it on this gun when I get one. What do you think? Would you say it’s front heavy?
Hi
Thanks for asking. It's not front heavy at all. very well balanced. The UKSR and original stock are pretty heavy and kinda balance the gun very well.
@@callsignpers5475 ah. Cool! Thanks for replying! Now, do you think the UKSR stock would be a good fit for this PDW?
@Golden Wolf Airsoft Ah. I thought you were commenting on my other video about my MARS DMR. 😁
UKSR will probably make this gun rear heavy.
What's the fps?
How do you take the suppressor off?
It’s also worth mentioning that the S3 E-trigger model comes with full metal internals (just like the nozzle) while the standard mosfet version comes with plastic and very little metal internals. For $30 more, go for the S3 E-trigger model!
Is that true? I was looking online and they seem to have metal internals. My Komodo non S3 came with metal internals.
This is the S3 Internals ruclips.net/video/0bHbWXNlu0E/видео.html
@@jamessawyer1331 i believe this standard one is using full metal internal its just that its not a reinforced metal.
@@kantoterror6165 aHH i get it.. I guess time to spend on my baby.. lol
Nice video as always 👍🏽 nice CQB gun.. You no ur ICS guns bro
Anthony Cobb cheers ;)
Was there any glue or set screw on the suppressor for you?
No glue afaik. I think there was a set screw but I can’t be 100% sure
Were you able to remove barrel? I can't get mine off. Any tips?
@@imaschinebeats wasn’t able to get mine off
@@mwickky I got mine off, use a heat gun and a big wrench.
Man ur a beast on them guns 👍🏽
my question why doies his gun not come with the orange piece but on the website it does?
Hollow it depends on the region. My country laws don’t require orange tips so I get my stuff with metal flash hiders
Здравствуйте. Спасибо за видео, как можно с вами пообщаться, хотел расспросить про ICS привод
Евгений пишите мне в инстаграме @callsign_pers или в фейсбуке Reza Danaei
Hey there mate, this was a really nice review of this gun, that i was waiting for. It would be great if you made another review about the distance that you can shoot with this replica outdoor.
Keep up the good work!
Glad it was helpful. Sure I’ll do an outdoor shooting test as well. As soon as the quarantine is over ;)
👍👍👍👍
Will other handguards fit on this?
100%Mozzarella theoretically yes.
Can 2200 mah dinogy fit the battery chamber?
Not sure. 7.4v might
Doubt
Amazing Nice 👍 design